ASUS XG-C100C NIC - Performance issues.


Recommended Posts

Currently using Unriad Version: 6.7.0-rc7 and I set the MTU under the network settings to 9000. However when I look at the system infromation within the Unraid GUI, the NIC shows "eth0: 10000 Mbps, full duplex, mtu 1500". The MTU does not look correct - not sure I'm missing anything?

 

Observing between 35 and 125mb/sec which is far lower than expected under 10G. On a 10G switch along with likewise configured (9000 MTU) Windows 10 system.

 

Looking at network.cfg:

# Generated settings:
IFNAME[0]="eth0"
DHCP_KEEPRESOLV="no"
DHCP6_KEEPRESOLV="no"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="yes"
USE_DHCP6[0]="yes"
IFNAME[1]="eth1"
PROTOCOL[1]="ipv4"
USE_DHCP[1]="yes"
MTU[1]="9000"
SYSNICS="2"

 

MTU settings look correct in the CFG files.

Onboard NIC is unplugged - not able to disable it from BIOS.

 

Syslog attached.

Thanks in advance,

Kat

syslog.txt

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.