[Support] ich777 - Gameserver Dockers


Recommended Posts

Hi

 

Is it possible to get the CSGO server to run 128 tickrate instead of 64 tickrate?

 

I have tried add the following to autoexec.cfg

sv_maxrate 0
sv_minrate 80000
sm_cvar sv_maxcmdrate 128
sv_mincmdrate 128
sv_minupdaterate 128
sm_cvar sv_maxupdaterate 128

 

I have rebooted after editing anything in the config files.

 

Please help

Link to comment
18 minutes ago, Ong Hui Hoong said:

it havent, becos i have this link of warning log, i search the forum

Please keep in mind that the container does 3 main steps:

  1. Check if SteamCMD is installed
  2. Start SteamCMD and check if the game is installed and up to date
  3. Start the game

 

The warning that SDL isn't found is displayed at step 2 and has nothing to do when step 3 is executed.

 

SDL isn't needed because this is only a media layer that SteamCMD wan't to use but is not necessary.

 

15 minutes ago, Ong Hui Hoong said:

do you have this "Warning: failed to init SDL thread priority manager: SDL not found" in your log?

Yes, you get this message in all my Steam based containers and they all run just fine.

 

13 minutes ago, Ong Hui Hoong said:

@ich777 this is my setting page, did i set something wrong? im my steam server i also can c, but just when connect it have error

Can you please post a screenshot from the Steam Server Browser or what error message do you get?

You give so much little information.

Link to comment
24 minutes ago, Ong Hui Hoong said:

im my steam server i also can c, but just when connect it have error

Look what I've found:

Also please be sure to leave the Steam credentials in the template empty since they are only needed when they are marked with the red asterisk (*).

If you have filled in the credentials, delete the container and also the directory for ARK that is created in your appdata directory and start over.

 

Link to comment
23 minutes ago, ich777 said:

Please keep in mind that the container does 3 main steps:

  1. Check if SteamCMD is installed
  2. Start SteamCMD and check if the game is installed and up to date
  3. Start the game

 

how do i restart SteamCMD? i have my Valheim Docker running without Issue.

 

23 minutes ago, ich777 said:

Can you please post a screenshot from the Steam Server Browser or what error message do you get?

You give so much little information.

image.png.1eafeeb8acbb095844d258f5fc3ebf38.png

can c both my my docker game server, Valheim run without issue.

 

image.thumb.png.02713748053e9ecfa00a949fdf35ee38.png

this is my ingame error

 

23 minutes ago, ich777 said:

Have you also added '+exec autoexec.cfg' to the GAME_PARAMS? Otherwise the autoexec.cfg isn't loaded:

grafik.thumb.png.fe1ffbae34952e69886d114bfe23e215.png

 

added this as well. still same issue.

Link to comment
22 minutes ago, ich777 said:

Look what I've found:

Also please be sure to leave the Steam credentials in the template empty since they are only needed when they are marked with the red asterisk (*).

If you have filled in the credentials, delete the container and also the directory for ARK that is created in your appdata directory and start over.

 

 

i tried that before, still dont work, the only thing i change from default is:

the IP address portion

"Validate Installation:" to true

"server Name" to Splinter_ARK

ofcos the "Game Parameters:" to +exec autoexec.cfg

 

this round i test using my steam version of the same also, dont work as well :(

Link to comment
6 minutes ago, Ong Hui Hoong said:

added this as well. still same issue.

Please look again at the post, this wasn't a answer for you... Please remove that entry...

 

7 minutes ago, Ong Hui Hoong said:

how do i restart SteamCMD? i have my Valheim Docker running without Issue.

Why would you restart SteamCMD? SteamCMD isn't running anyways when step 3 is executed (start the dedicated server), SteamCMD is only needed when the game is donwnloaded/updated.

Please ignore the SDL warning, this has nothing to do with your issue!!!

 

8 minutes ago, Ong Hui Hoong said:

this is my ingame error

Is this from the Steam or Epic Game? Something seems to be wrong with the ports when you get this error.

 

I now noticed that you run this in a custom br0 configuration, can you please try to run this in "bridge" mode instead of "br0" and then connect with your UNRAIDSERVERIP:7777

Something seems wrong with your network configuration, I can only tell you that I just can connect fine to the server and everything is working just fine.

Link to comment
53 minutes ago, ich777 said:

Please ignore the SDL warning, this has nothing to do with your issue!!!

I'm ignoring it already.

 

53 minutes ago, ich777 said:

Is this from the Steam or Epic Game? Something seems to be wrong with the ports when you get this error.

from steam

 

54 minutes ago, ich777 said:

I now noticed that you run this in a custom br0 configuration, can you please try to run this in "bridge" mode instead of "br0" and then connect with your UNRAIDSERVERIP:7777

i tried, now the docker cannot even fully load. some how cannot connect to steam public

image.png.465089414a7430326147a9f40e05530f.png

 

 

55 minutes ago, ich777 said:

I now noticed that you run this in a custom br0 configuration, can you please try to run this in "bridge" mode instead of "br0" and then connect with your UNRAIDSERVERIP:7777

Something seems wrong with your network configuration, I can only tell you that I just can connect fine to the server and everything is working just fine.

i run my Valheim on the similar custon Br0 without issue.

 

 

and when i change it back to the custome Br0, the game server loaded properly.

 

and i just notice this

image.thumb.png.c260103063838898f4501947e6d60c0c.png

the server version and my client version not the same, was that the issue?

Link to comment
4 minutes ago, Ong Hui Hoong said:

i tried, now the docker cannot even fully load. some how cannot connect to steam public

I don't know what happens there...

Have you put in your Steam credentials in the Docker template?

Also please turn off the validation.

 

6 minutes ago, Ong Hui Hoong said:

the server version and my client version not the same, was that the issue?

Please update the game on your local computer so that the versions match.

Link to comment
4 minutes ago, ich777 said:

Have you put in your Steam credentials in the Docker template?

i have not, i just rebuild the docker, delete the ark-se folder as well.

 

5 minutes ago, ich777 said:

Also please turn off the validation.

will do.

 

5 minutes ago, ich777 said:

Please update the game on your local computer so that the versions match.

i just download the game 3 hour ago from steam, is up to date

Link to comment
10 minutes ago, ich777 said:

@Cyd do you have a clue why it doesn't work in his case?

Nope @ich777 you hit everything I would have said... I know WildCard is in full panic mode right now with the release of the Genesis 2 DLC... there have been... snags. personaly I am waiting a few days to let them get all of that sorted before I spin up a new server image container.

  • Thanks 1
Link to comment
2 hours ago, Cyd said:

And this is why I am not touching ARK for a little while ;)

 

— Today at 12:38 PM

v329.5 [Server: v329.3] - 06/03/2021 - Major server version update (Genesis Part 2 Launch)

ok i have try 1 more time, this time i even use another SteamCMD folder, so the whole docker folder is all new after rebuild, still not working.

i have my game and docker updated to the new version as well.

not sure where is the problem :(

Link to comment
1 hour ago, Ong Hui Hoong said:

ok i have try 1 more time, this time i even use another SteamCMD folder, so the whole docker folder is all new after rebuild, still not working.

i have my game and docker updated to the new version as well.

not sure where is the problem :(

Sorry but I really can't help.

I've also called a friend now, that runs a ARK server on Unraid and actually plays on it with a few friends of him, and he confirmed that everything is working as expected and that he never got a problem connecting.

Link to comment
4 hours ago, ich777 said:

Sorry but I really can't help.

I've also called a friend now, that runs a ARK server on Unraid and actually plays on it with a few friends of him, and he confirmed that everything is working as expected and that he never got a problem connecting.

is ok, weird issue, only me cannot, i give up also, thanks for your time helping me troubleshooting :)

and ur patience as well :)

Link to comment
On 5/13/2021 at 9:51 AM, ich777 said:

Please join @Spectral Force's Discord for support on 7DtD: https://discord.gg/VwwYA5h

 

He is the specialist for this game but I think if you add something like: '-beta stable_u52' (without quotes) to the GAME_ID it should work, of course you have to set the version you want to stay on:

grafik.thumb.png.606a853a1c3666ad32a049a19cd6c1af.png

Any idea what this would look like for Conan Exiles? Having a similar issue.

Edited by nick_s
Link to comment
On 5/22/2021 at 2:14 AM, John2222 said:

I managed that steamcmd would load the mod: The steam account have to have an arma copy. My first account doesn't have this (and so also no workshop to download mods from).🙄

 

But there is an other problem (maybe a rights thing?):

 

...

 Update state (0x5) verifying install, progress: 92.22 (12719282987 / 13791993469)
src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

 Update state (0x5) verifying install, progress: 95.71 (13200707996 / 13791993469)
 Update state (0x5) verifying install, progress: 99.50 (13722886240 / 13791993469)
 Update state (0x61) downloading, progress: 99.89 (13776713784 / 13791993469)
Success! App '233780' fully installed.
Downloading item 541888371 ...src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

src/clientdll/remotestoragefilesynccontext.cpp (853) : Assertion Failed: Failed to write file after download (2)

...

 

PS:  I build a new server with new account data from scratch but the problem isn't gone.

 

@John2222

 

Hello 

 

Did you ever get this to work? im currently trying to set this server up and having the same issues as you are.

Edited by Geo
Forgot to tag
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.