52 minutes ago, Abhi said:

Any idea on how to change a iw4x server from Lobby Party (P) to a Dedicated Server (M)?

Try to add this to the Startup Parameters::

+set party_enable "0"

 

...but I'm not to sure about that since I'm not that familiar with the game, you can try different config files too.

See also here: Click

1 hour ago, ich777 said:

Try to add this to the Startup Parameters::

+set party_enable "0"

 

...but I'm not to sure about that since I'm not that familiar with the game, you can try different config files too.

See also here: Click

Was able to figure it out.

 

Needs to be +party_enable 0

 

but I cant get it to show in the master list 🤔 for some reason it only shows as a local server

16 minutes ago, Abhi said:

but I cant get it to show in the master list 🤔 for some reason it only shows as a local server

I only can think of a port forwarding issue, have you yet tried to connect from outside your network to the server via direct connection and also if it doesn't lists when you try it from outside?

This could also be a hair pin NAT issue.

Hey,

i have a problem. I wanted to set a password on my garrysmod server.

This is normally done by editing the server.cfg in garrysmod/cfg/ and adding

sv_password "PASSWORD"

to it. However i cannot connect to my server using that password. Gmod tells me it is wrong. Have you encountered this yet?

8 minutes ago, Assaro said:

Hey,

i have a problem. I wanted to set a password on my garrysmod server.

This is normally done by editing the server.cfg in garrysmod/cfg/ and adding

sv_password "PASSWORD"

to it. However i cannot connect to my server using that password. Gmod tells me it is wrong. Have you encountered this yet?

Do you also added:

-exec server.cfg

to the GAME_PARAMS in the container template?

 

 

If not your should be also able to add a password by adding this to the GAME_PARAMS:

+sv_password yourpassword

 

Hi,

 

Thank you for all your work on these dockers. I've just installed the V Rising docker and I can't get the configs to take effect. Anything I put in the game or host settings config doesn't do anything. I stopped the docker, edited the configs, saved them and started the docker again. The server is working, it's just the settings aren't changing.

 

 I'm assume I'm missing something, any help would be much appreciated.

Edited May 24, 20224 yr by Benji

Hi I had another question about the Assetto Corsa server, regarding the Content Manager Wrapper extensions for Server Manager.
 

Is there a default port assumed for this in the container, or do I need to externalise additional ports to make this work?

Do you know if there is a recommended port for Content Manager Wrapper?

22 minutes ago, Benji said:

Thank you for all your work on these dockers. I've just installed the V Rising docker and I can't get the configs to take effect. Anything I put in the game or host settings config doesn't do anything. I stopped the docker, edited the configs, saved them and started the docker again. The server is working, it's just the settings aren't changing.

Which settings did you change and which settings file(s) did you change?

Did you read the description where the files are located?

8 minutes ago, KptnKMan said:

Do you know if there is a recommended port for Content Manager Wrapper?

You are talking about the variable Install Assetto-Server-Manager or am I wrong?

If yes, simply set it to "true" and you should be able to connect with: http://[IPOFYOURSERVER]:8771

 

2 minutes ago, ich777 said:

Which settings did you change and which settings file(s) did you change?

Did you read the description where the files are located?

 

I'm an idiot. I read it three times and still missed it. I can see I was editing the files in the wrong location. Thank you.

3 minutes ago, ich777 said:

You are talking about the variable Install Assetto-Server-Manager or am I wrong?

If yes, simply set it to "true" and you should be able to connect with: http://[IPOFYOURSERVER]:8771

 

No sorry, I mean that within Server Manager, in Server->Options there is (bout halfway down) an option for "Enable Content Manager Wrapper" and "Content Manager Wrapper Port" like this:

 

I'm not sure if this is assumed already within the container of if I need to specify it and make new port?

 

Also, I'm struggling to find anywhere if there's a recommended port for this.

4 minutes ago, KptnKMan said:

Also, I'm struggling to find anywhere if there's a recommended port for this.

I'm not too familiar with this in general because I added the Server Manager on request, I can only help with the basic functionality from the container itself.

 

Maybe look on the Wiki on GitHub from the Server Manager: Click

3 minutes ago, ich777 said:

I'm not too familiar with this in general because I added the Server Manager on request, I can only help with the basic functionality from the container itself.

 

Maybe look on the Wiki on GitHub from the Server Manager: Click

Yeah thanks, I've been looking through there already too.

There seems to be no definitive answer, the only thing I can find is this screenshot with port 9679 in it:

1 hour ago, KptnKMan said:

There seems to be no definitive answer, the only thing I can find is this screenshot with port 9679 in it:

Then I would try it this way, but I really can't help further since I don't know what the Content Manager is.

17 minutes ago, ich777 said:

Then I would try it this way, but I really can't help further since I don't know what the Content Manager is.

Oh, then I might recommend if you use Assetto Corsa you give it a try, it's quite amazing.

AC Content Manager is the definitive frontend for Assetto Corsa, used by basically everyone at this point.

It basically entirely replaces the frontend of Assetto Corsa, and managed all resources and game files for you like installing cars, tracks, graphical plugins (Custom Shader Mod, Sol, etc), modules, and basically all game artifacts.

As far as I know, this option within Server Manager (Content Manager Wrapper) allows the server to expose more information than the regular AcServer, and so provides Content Manager clients with added metadata.

Like I said using Content Manager is the definitive way to play Assetto Corsa:

 

 

I hope that's helpful.

 

Anyway, thanks I'll take a look at exposing port 9679 and using that as a default for Content Manager Wrapper.

 

Is this something you might consider adding to the container as an exposed port?

39 minutes ago, KptnKMan said:

Oh, then I might recommend if you use Assetto Corsa you give it a try, it's quite amazing.

I play it from time to time.

 

39 minutes ago, KptnKMan said:

As far as I know, this option within Server Manager (Content Manager Wrapper) allows the server to expose more information than the regular AcServer, and so provides Content Manager clients with added metadata.

Modding is always up to the user, I don't know every game but I try to help where I can but this is out of my scope... Sorry, maybe someone else has a clue how this is working.

1 minute ago, KptnKMan said:

Would you consider adding this port to the container?

Is it needed? I really don't know... you can also add it manually...

I am trying to set up a CoreKeeper server, however it's throwing segfaults with a completely fresh install. Any ideas?

 

...
Update state (0x61) downloading, progress: 94.02 (263737568 / 280515706)
Update state (0x81) verifying update, progress: 99.89 (280201100 / 280515706)
Success! App '1963720' fully installed.
---Prepare Server---
---Checking for old display lock files---
---Checking for old logfiles---
---Server ready---
---Starting Xvfb server---
---Start Server---
/opt/scripts/start-server.sh: line 84: 160 Segmentation fault ${SERVER_DIR}/CoreKeeperServer -batchmode -logfile ${SERVER_DIR}/CoreKeeperServerLog.txt -world ${WORLD_INDEX} -worldname "${WORLD_NAME}" -datapath "${SERVER_DIR}/Save" ${GAME_PARAMS} 2 > /dev/null
Terminated

 

5 minutes ago, Aroxis said:

I am trying to set up a CoreKeeper server, however it's throwing segfaults with a completely fresh install. Any ideas?

No issue over here (completely new installed container from the CA App):

---Ensuring UID: 99 matches user---
---Ensuring GID: 100 matches user---
---Setting umask to 000---
---Checking for optional scripts---
---No optional script found, continuing---
---Taking ownership of data...---
---Starting...---
---Update SteamCMD---
Redirecting stderr to '/serverdata/Steam/logs/stderr.txt'
[  0%] Checking for available updates...
[----] Verifying installation...
Steam Console Client (c) Valve Corporation - version 1653101151
-- type 'quit' to exit --
Loading Steam API...OK

Connecting anonymously to Steam Public...OK
Waiting for client config...OK
Waiting for user info...OK
---Update Server---
Redirecting stderr to '/serverdata/Steam/logs/stderr.txt'
[  0%] Checking for available updates...
[----] Verifying installation...
Steam Console Client (c) Valve Corporation - version 1653101151
-- type 'quit' to exit --
Loading Steam API...OK

Connecting anonymously to Steam Public...OK
Waiting for client config...OK
Waiting for user info...OK
 Update state (0x3) reconfiguring, progress: 0.00 (0 / 0)
 Update state (0x3) reconfiguring, progress: 0.00 (0 / 0)
 Update state (0x61) downloading, progress: 24.46 (68610225 / 280515706)
 Update state (0x81) verifying update, progress: 24.65 (69152587 / 280515706)
Success! App '1963720' fully installed.
---Prepare Server---
---Checking for old display lock files---
---Checking for old logfiles---
---Server ready---
---Starting Xvfb server---
---Start Server---
Server Game ID: TcWVdFXBPQbGQAfz57GJvBwUDa7C

 

Do you have a Cache drive installed? Do you have anything changed in the template? To what is the appdata directory set in therms of Use Cache? What processor are you running this on?

9 minutes ago, ich777 said:

Do you have a Cache drive installed? Do you have anything changed in the template? To what is the appdata directory set in therms of Use Cache? What processor are you running this on?

I do have a cache drive installed, and the server seems to be running from the cache. Which is fine, I run most of my apps off of the cache drive.

Nothing changed in the template. I even made sure to completely wipe and fresh install a second time to make sure. No difference.

Mappings:
SteamCMD: /mnt/user/appdata/steamcmd
ServerFiles: /mnt/cache/appdata/corekeeper

Running it off of a AMD Ryzen 5 2400G @ 3600Mhz (stock)

Gave privilige to the container as well, no changes.

12 minutes ago, Aroxis said:

ServerFiles: /mnt/cache/appdata/corekeeper

Please try to change the directory to /mnt/user/appdata/corekeeper.

 

Also one question is open, to what is the appdata Share set in terms of Use Cache (you'll find this in the Share settings).

 

12 minutes ago, Aroxis said:

Gave privilige to the container as well, no changes.

Please don't do that!!!!!!!

 

I don't know why everyone is so loose about privileged rights and Docker, by enabling this you give the container almost full access to your Unraid server, this is a huge security risk!

3 minutes ago, ich777 said:

Please try to change the directory to /mnt/user/appdata/corekeeper.

Tried, but no difference.
 

3 minutes ago, ich777 said:

Also one question is open, to what is the appdata Share set in terms of Use Cache (you'll find this in the Share settings).

This is set to prefer cache.

___ 
Thanks for all the quick replies by the way

Just now, Aroxis said:

Tried, but no difference.

On what Unraid version are you?

4 minutes ago, ich777 said:

On what Unraid version are you?

Right. It took a while but this was the culprit.

I was on 6.9.2 and I saw that 6.10.1 was available. After updating (this took a long time) the game ran fine. Thanks for the troubleshooting @ich777!

I'm interested in a Keplerth dedicated server.   Any plans for one?