I don't have the experimental version, I have the normal version of the game and it's the one I want to set up the server for. To force the update of the server I think you have to put "true" where it says validate installation, and then remove it

9 hours ago, d_buster said:

How do I force an update on my docker server to match my client version?

Set validation to true (but please remove true after it finished updating since it will slow down the container start and force a validation on each container start):

 

If that doesn't help, try to create a second instance on your server (stop the first installation in the first place) by pulling a fresh copy from the CA App and giving it a different name and ServerFiles path in the second instance and see if that helps.

 

7 hours ago, Garikoitz said:

I have the same client as your server. Could you please tell me what number you have in the "game id"?

This is most certainly an issue with SteamCMD itself, I see this from time to time for a few users but I don't know what causes that because I haven't been able to reproduce it yet.

 

Do you maybe have LANCache installed or something similar?

 

Please try what I've wrote in the first paragraph.

 

 

Both of you could also try to set the container to experimental and enable validation <- this is necessary if you switch branches and then set it back to default, of course with validation enabled.

 

 

May I also ask where are both of you are located in the world?

Hace 10 horas, ich777 dijo:

Establezca la validación en verdadero (pero elimine verdadero después de que termine de actualizarse, ya que ralentizará el inicio del contenedor y forzará una validación en cada inicio del contenedor):

 

Si eso no ayuda, intente crear una segunda instancia en su servidor (detenga la primera instalación en primer lugar) extrayendo una copia nueva de la CA App y dándole un nombre diferente y una ruta de ServerFiles en la segunda instancia y vea si eso ayuda

 

Sin duda, este es un problema con SteamCMD en sí mismo, lo veo de vez en cuando para algunos usuarios, pero no sé qué lo causa porque aún no he podido reproducirlo.

 

¿Quizás tienes instalado LANCache o algo similar?

 

Por favor, intente lo que he escrito en el primer párrafo.

 

 

Ambos también podrían intentar establecer el contenedor en experimental y habilitar la validación <- esto es necesario si cambia de rama y luego lo vuelve a configurar por defecto, por supuesto con la validación habilitada.

 

 

¿Puedo preguntar también dónde se encuentran ambos en el mundo?

I live in Bilbao, in the north of Spain. Thanks, I'll try and see but I think I've already tried all that, I'll do it again to see if it works. and I don't have a lan cache. greetings

Edited August 21, 20232 yr by Garikoitz

To confirm, with this docker you can play the normal version of the game, right?

33 minutes ago, Garikoitz said:

To confirm, with this docker you can play the normal version of the game, right?

Normal?

 

Sure, but you can also install the experimental branch and vice versa if you want too (described in the variable from the GAME_ID in the template).

 

Please don't get me wrong but the container is working fine so far and I'm currently have only two reports about pulling the wrong version from what I think is a SteamCMD issue.

Have you yet tried the solutions from above?

5 minutes ago, ich777 said:

¿Normal?

 

Claro, pero también puede instalar la rama experimental y viceversa si lo desea (descrito en la variable de GAME_ID en la plantilla).

 

No me malinterpreten, pero el contenedor funciona bien hasta ahora y actualmente solo tengo dos informes sobre la extracción de la versión incorrecta de lo que creo que es un problema de SteamCMD.

¿Ya has probado las soluciones de arriba?

It won't let me install a second instance, although I've already deleted the container and both folders, dayz and steamcmd, and then I've reinstalled but it does the same

Just now, Garikoitz said:

It won't let me install a second instance, although I've already deleted the container and both folders, dayz and steamcmd, and then I've reinstalled but it does the same

Go to the CA App tab, click on settings on the left hand menu in CA, select Allow installation from second instance and click Apply.

 

With that you can install more instances from one template.

ok, I already have it, I'm going to put a second instance to see how it goes

nothing, the same, could you please tell me exactly what I have to put in the game id line for the normal version? because i think i'm doing something wrong

 

Edited August 21, 20232 yr by Garikoitz

10 minutes ago, Garikoitz said:

nothing, the same, could you please tell me exactly what I have to put in the game id line for the normal version? because i think i'm doing something wrong

Leave it at default.

I don't understand what I have to put to download one or another version. For example, if I want to install the version that I have circled in green, what would I have to put in the game id line? thank you

2 minutes ago, ich777 said:

Déjalo por defecto.

 

by default is how it gives me the error

6 minutes ago, Garikoitz said:

by default is how it gives me the error

Please describe what you want to do exactly. The Sub ID is nothing you can install because it is covered by the App ID.

 

Please take a deeper look into how it works here.

You can only download manifests, hope that makes sense.

7 minutes ago, ich777 said:

Por favor, describa lo que quiere hacer exactamente. El Sub ID no es nada que pueda instalar porque está cubierto por el ID de la aplicación.

 

Por favor, eche un vistazo más profundo a cómo funciona aquí .

Solo puede descargar manifiestos, espero que tenga sentido.

What I want to do is create a server with the official version of dayz, not a beta. and when they update the game so does the server. Ok, I'll look at the link you gave me. thank you

That tutorial is for steamcmd, but I don't have access to docker's steamcmd

 

 

I have tried to enter the command in the docker console but it does not respond

 

 

Edited August 21, 20232 yr by Garikoitz

11 minutes ago, Garikoitz said:

That tutorial is for steamcmd, but I don't have access to docker's steamcmd

My container uses steamcmd to download the dedicated server, basically everything that you put in the GAME_ID variable will be appended.

 

What command do you need to run?

 

EDIT: Please do not do anything from the Docker command line...

5 minutes ago, ich777 said:

¿Qué comando necesitas ejecutar?

 

I only need the official version of the game to be downloaded instead of the experimental one, nothing more. now there is version 1.21 but the server is downloading 1.22

1 minute ago, Garikoitz said:

I only need the official version of the game to be downloaded instead of the experimental one, nothing more. now there is version 1.21 but the server is downloading 1.22

Please give me the command that you try to run with steamcmd from the tutorial above and I can give you where to put what.

 

I would also ask the developers why the Linux dedicated server version does not match the game version... 

5 minutes ago, ich777 said:

Please give me the command that you try to run with steamcmd from the tutorial above and I can give you where to put what.

 

I would also ask the developers why the Linux dedicated server version does not match the game version... 

I don't know what command to put, I just want the docker to download the official version instead of the experimental one. the version that the server would have to download is 1.21

2 minutes ago, Garikoitz said:

I don't know what command to put, I just want the docker to download the official version instead of the experimental one. the version that the server would have to download is 1.21

Oh now I get it, there is no stable version for Linux out there, you have to use the Experimental version.

 

You even posted a screenshot, look how the App is named:

1 hour ago, Garikoitz said:

 

There where a App ID 1042422 out there IIRC which was only for Linux back then when they created the dedicated server for Linux.

Only Experimental is available for Linux, you can set up a VM and run DayZ in there if you want the latest stable <- don't ask my why that is, this is a thing you have to ask the developers.

 

The stable version from the dedicated server doesn't support Linux as you can see here (and no it won't work if you use this App ID):

6 minutes ago, ich777 said:

Oh, ahora lo entiendo, no existe una versión estable para Linux, tienes que usar la versión Experimental.

 

Incluso publicaste una captura de pantalla, mira cómo se llama la aplicación:

 

Había un ID de aplicación 1042422 por ahí IIRC que era solo para Linux en ese entonces cuando crearon el servidor dedicado para Linux.

Solo Experimental está disponible para Linux, puede configurar una VM y ejecutar DayZ allí si desea la última versión estable <- no me pregunte por qué, esto es algo que debe preguntar a los desarrolladores.

 

La versión estable del servidor dedicado no es compatible con Linux, como puede ver aquí (y no, no funcionará si usa esta ID de aplicación):

So why did the other guy have the version that I needed?

33 minutes ago, Garikoitz said:

So why did the other guy have the version that I needed?

I don't know. I assume that this version was someday experimental and became stable and now he can‘t update because of some reason.

 

What did you do @d_buster? Have you yet tried my fix from above?

@d_buster If you want, give me the data of your server to see if I can connect, because I have the client that requests your server

Just got Sons of the Forrest installed and working. I already have a local server my friends and I play on. How can I migrate that saved game to the dedicate server?

Nvm, figured it out.