May 7, 20197 yr Community Expert hello im new to unraid ,i have set a i5 6600k (not oc,no turbo either) 4x4 gb 2133 ddr4 gskill 16CL Mars MPII650 Gaming psu and asus maximus hero VIII mobo. its have been power up for 7 days since i got the unraid pro key . i had 0 problems in my everyday use and i got 1 hdd assigned to transmission outside of the array ,and 10 hdd from mixed sizes. today when i arrived at home the server was powered off and i know it wasnt an AC failure (got an alarm conected to the wall so i can check ) i cant find any log from the error basically the server show logs only from the new "boot up" how i can find the old logs to check the cause?
May 7, 20197 yr Community Expert 16 minutes ago, ARMITAGEIII said: how i can find the old logs to check the cause? What version of Unraid? There is syslog server capability builtin to the 6.7 release candidates which allows saving syslogs. If you are using a stable release, 6.6.x or earlier, then the syslogs don't survive reboot, unless you use Troubleshooting Mode from the Fix Common Problems plugin. Even if it wasn't AC power this time, you really should get an UPS for your server.
May 7, 20197 yr Author Community Expert 8 minutes ago, trurl said: What version of Unraid? There is syslog server capability builtin to the 6.7 release candidates which allows saving syslogs. If you are using a stable release, 6.6.x or earlier, then the syslogs don't survive reboot, unless you use Troubleshooting Mode from the Fix Common Problems plugin. Even if it wasn't AC power this time, you really should get an UPS for your server. i have the latest one ,the psu is new and the power alarm is ok ,in fact i got it because an old UPS failed me many times ,so currently im without ups at all . where i can find how to enable the persistent syslog to know the cause? thank you in advance
May 7, 20197 yr Author Community Expert 4 minutes ago, ARMITAGEIII said: i have the latest one ,the psu is new and the power alarm is ok ,in fact i got it because an old UPS failed me many times ,so currently im without ups at all . where i can find how to enable the persistent syslog to know the cause? thank you in advance could it be something like s5 due to inactivity ? the array is checking the consistency just after the power up ,that show a bad power down or sudden power down isnt? the version is : 6.6.7 Edited May 7, 20197 yr by ARMITAGEIII added info
May 7, 20197 yr Community Expert 56 minutes ago, ARMITAGEIII said: i have the latest one 54 minutes ago, ARMITAGEIII said: the version is : 6.6.7 ^That is the latest STABLE version. You must install a 6.7.x Release Candidate to get the syslog server. https://forums.unraid.net/topic/77279-unraid-os-version-670-rc-series-has-started/ Or install Fix Common Problems plugin and use the Troubleshooting Mode. 58 minutes ago, ARMITAGEIII said: the array is checking the consistency just after the power up ,that show a bad power down or sudden power down isnt? If the array isn't stopped before shutdown then parity update might not have had a chance to complete, so you get a parity check the next boot.
May 7, 20197 yr Community Expert You also need this link to get started with the prerelease install: https://forums.unraid.net/topic/57820-limetech-release-process-how-do-i-install-prereleases/
May 8, 20197 yr Author Community Expert 6 hours ago, trurl said: ^That is the latest STABLE version. You must install a 6.7.x Release Candidate to get the syslog server. https://forums.unraid.net/topic/77279-unraid-os-version-670-rc-series-has-started/ Or install Fix Common Problems plugin and use the Troubleshooting Mode. If the array isn't stopped before shutdown then parity update might not have had a chance to complete, so you get a parity check the next boot. Thank you for the reply. I upgraded to the RC as you suggested and enabled the syslog , so i will have the log the next time a sudden power down happens(lets hope never :). Also the syslog and new dashboard seems better ,i just would like to have a cpu temperature somewhere in the dashboard. I know is not a life or death feature to add, but some users like me who use the server mainly as streaming video platform or low power task machine have passive cooling radiators. Anyways , if you can , close this thread and thanks for the info tips and help
May 8, 20197 yr Community Expert 27 minutes ago, ARMITAGEIII said: a cpu temperature somewhere in the dashboard Dynamix System Temp plugin: https://forums.unraid.net/topic/34889-dynamix-v6-plugins/
May 9, 20197 yr Author Community Expert On 5/8/2019 at 5:02 AM, trurl said: Dynamix System Temp plugin: https://forums.unraid.net/topic/34889-dynamix-v6-plugins/ got everything nice and running ,thank you very much
Archived
This topic is now archived and is closed to further replies.