May 13, 20197 yr Hello, I pulled a drive from an old NAS and was trying to use it in the new array. I went ahead and did the preclear but and i left it for the night. After i come back i did not see the disk at all onthe list. So i went ahead and rebooted PC and disk came back. However now when it runs preclear is just says aborted after reading for some time. In the logs i see: current-pending-sector-count 1 which is marked yellow. I cannot run extended or short smart is always says error and that's it. Is the drive completely bad with single sector ? Is it safe to run or it was just a glich that is completly unmounted itself... I used diffrent SATA port, diffrent cable all with same result..
May 13, 20197 yr Community Expert If the disk will not run the short AND extended SMART tests without error then the disk has almost certainly had it. As a rule of thumb passing those tests does not mean a disk does not have issues, but failing them certainly does. if you want confirmation you could post your system diagnostics zip file (obtained via Tools->Diagnostics).
May 13, 20197 yr Author i did erase and current-pending-sector-count down 1 now it shows current-pending-sector-count 0 ?
May 15, 20197 yr On 5/13/2019 at 10:11 AM, macmus said: ? On 5/13/2019 at 2:57 AM, itimpi said: post your system diagnostics zip file (obtained via Tools->Diagnostics).
Archived
This topic is now archived and is closed to further replies.