Preclear fails with a drvie

[macmus]

Hello,

 

I pulled a drive from an old NAS and was trying to use it in the new array.

 

I went ahead and did the preclear but and i left it for the night. After i come back i did not see the disk at all onthe list. So i went ahead and rebooted PC and disk came back. 

 

However now when it runs preclear is just says aborted after reading for some time.

 

In the logs i see:

 

current-pending-sector-count 1 

 

which is marked yellow.

 

I cannot run extended or short smart is always says error and that's it.

 

Is the drive completely bad with single sector ?

 

Is it safe to run or it was just a glich that is completly unmounted itself... I used diffrent SATA port, diffrent cable all with same result..

 

 

 

 

[itimpi]

If the disk will not run the short AND extended SMART tests without error then the disk has almost certainly had it.   As a rule of thumb passing those tests does not mean a disk does not have issues, but failing them certainly does.

 

if you want confirmation you could post your system diagnostics zip file (obtained via Tools->Diagnostics).

[macmus]

i did erase and 

 

current-pending-sector-count down 1

 

now it shows 

 

current-pending-sector-count 0 

 

?

[JonathanM]

On 5/13/2019 at 10:11 AM, macmus said:

?

 

On 5/13/2019 at 2:57 AM, itimpi said:

post your system diagnostics zip file (obtained via Tools->Diagnostics).