Jump to content
djrkd

Unstable Array

3 posts in this topic Last Reply

Recommended Posts

Hi All, 

 

A few weeks back I added a SATA Card,  https://www.amazon.com/gp/product/B00AZ9T3OU/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1  I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 

 

 I believe I had plugged in one of my drives into it, and it was stable for a few weeks. 

 

Now that I have more capacity for drives - I went ahead and added a cache mirror. After moving some drives around I ended up with some issues. 

 

I have most of my dockers shut down, to prevent any parity messups (I Hope)

 

I attempted to do a "New Config" but ended up in the same state. 

 

Please help!

 

 

unraid2.png

tower-diagnostics-20190517-2103.zip

Share this post


Link to post

Marvell SATA controller chips have been a source of problems for the past few years.  And the problem is a hit-and-miss one.  Basically, the recommendation has been to replace them with LSI based SATA cards.  However, in the 6.7.0 release (the latest stable version), there have been several folks who have success with a configuration change to the kernel as it boots up.  You can read about it here:

 

    https://forums.unraid.net/topic/80001-unraid-os-version-67-available/page/9/?tab=comments#comment-744838

 

 

This would require that you upgrade to 6.7.0 but that is sometime you probably will want to do anyway. 

Share this post


Link to post

Disk dropped offline so there's no SMART but it appears to be a connection/controller problem.

 

5 hours ago, rkdser@gmail.com said:

I attempted to do a "New Config" but ended up in the same state. 

That's was lucky because a "New config" is not used to rebuild a disabled drive.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.