Kevin H Posted May 25, 2019 Share Posted May 25, 2019 (edited) Hi all, I'm a fairly comfortable IT user, not a complete noob, but not a Linux sysadmin, either. I have a brand new UNRAID build which I am admittedly fumbling my way through in the hopes I can replace my current NAS with it. It has no data yet, and I can play/reconfigure as needed. Some reading I've been doing led me to believe UNRAID would create some default shares on my new array for docker/VM use, but it hasn't. Then, when I try to create some new user shares using all disks, they are either immediately deleted, or they only show up in one disk (when I look via webgui - using SMB from a windows machine only shows a "flash" dir that is secured). This is super confusing to me. I've read some topics here and around the net, but none really seem to apply to my case. I've read one that says I must stop the array before creating my user shares, but when I do I can't create shares and when I restart it again I get the same result. Please let me know if I can provide any more info. TIA tower-diagnostics-20190525-0028.zip Edited May 25, 2019 by Kevin H Quote Link to comment
JorgeB Posted May 25, 2019 Share Posted May 25, 2019 Check filesystem on disk2: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Quote Link to comment
Kevin H Posted May 25, 2019 Author Share Posted May 25, 2019 Wow! Thank you! I can't believe I missed that, but I wonder if there was any function (in the webgui) to actually tell me there was a problem? Quote Link to comment
JorgeB Posted May 25, 2019 Share Posted May 25, 2019 1 minute ago, Kevin H said: but I wonder if there was any function (in the webgui) to actually tell me there was a problem? There isn't a warning for filesystem corruption, only by looking at the syslog, though for more severe cases the disk will be unmountable and that can be seen on the GUI. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.