Lsi card not booting if i reboot unraid


Recommended Posts

It's been two days that my server is glitching a lot.

 

Dockers does not respond randomly / webgui etc.

 

If i reboot the pc in unraid webgui lsi card does not showed up anymore.  

Lsi sas sata it mode 9201-8i    8ports

 

If i closed it and start it back it works..

 

I uploaded the diag file after a reboot.

 

I tried to go back to 6.6.7 without luck

 

 

any help please thx

 

unraid-diagnostics-after reboot.zip

Edited by francrouge
Link to comment

From the syslog in your Diagnostics, it appears that your LSI card is booting.  But as you can see the firmware version is out-of-date compared to what the vendors are currently providing.

LSISAS2008: FWVersion(11.00.00.00), ChipRevision(0x03), BiosVersion(07.11.00.00)

Here is the same line from my syslog:

 

LSISAS2308: FWVersion(20.00.07.00), ChipRevision(0x05), BiosVersion(07.39.02.00)

I am not an expert on this type of situation nor am I familiar with the reasons for all of the updates but I do recall that some were required because of operational issues.  Perhaps, @johnnie.black might jump in and provide some of his special insight.

 

EDIT:  I have two of these cards and this is the line from that syslog:

 

 

LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.02.00)

 

Edited by Frank1940
Link to comment
18 minutes ago, johnnie.black said:

I see several segfaults and call traces on the log, good idea to run memtest.

 

And yes, also a good idea to update the LSI firmware.

I had 64Go of ram recently could it be that ?

 

And also how can i update the lsi card ? 

 

thx

Link to comment
Just download the firmware package form Broadcom's support site, instructions are included.

I think its my new ram ... Memtest tells me that there is 11000 errors and cannot continue..

 

God i thought it was good ram .. (corsair)

 

I will try to get a refund and put my old 16 go to see if its stable.

 

 

 

Envoyé de mon Pixel 2 XL en utilisant Tapatalk

 

 

 

Link to comment
https://www.broadcom.com/support/download-search?pg=Legacy+Products&pf=Legacy+Host+Bus+Adapters&pn=SAS+9211-8i+Host+Bus+Adapter&pa=&po=&dk=
 
Package you want is under Firmware:
9211-8i_Package_P20_IR_IT_Firmware_BIOS_for_MSDOS_Windows
Still trying to figure how to update correctly.

But i was wondering it seam that when i reboot i. Unraid somehow it skip the lsi boot when computer start. Really weird could it be a setting in my bios ?

Thx

Envoyé de mon Pixel 2 XL en utilisant Tapatalk

Link to comment
1 hour ago, johnnie.black said:

There should be a board bios options to enable/disable option ROM for addon controllers, some have a general setting, others have a slot by slot setting.

ok i'm going to check that.

 

Question for you.

 

My system is in uefi. I saw in the usb key for unraid that there is an option  called:

 

Permit UEFI boot mode 

Boot system in UEFI mode. Please check your system settings to support UEFI boot mode.

 

Should i checked the box ?

 

thank you

Edited by francrouge
Link to comment
I see several segfaults and call traces on the log, good idea to run memtest.
 
And yes, also a good idea to update the LSI firmware.
Hi @johnnie.black

Just to let you know that i updated my lsi card.

And tested a couple of reboot and its seem to be working good now.

Thx for you're help always appreciated

Envoyé de mon Pixel 2 XL en utilisant Tapatalk

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.