May 29, 20197 yr New server which Unraid was migrated older machine which ran great for years.... New Build where Unraid Crashing: Model: Custom M/B: Micro-Star International Co., Ltd. MEG X399 CREATION (MS-7B92) Version 1.0 - s/n: IB16121592 BIOS: American Megatrends Inc. Version 1.20. Dated: 11/14/2018 CPU: AMD Ryzen Threadripper 2950X 16-Core @ 3500 MHz HVM: Enabled IOMMU: Enabled Cache: 1536 KiB, 8192 KiB, 32768 KiB Memory: 16 GiB DDR4 (max. installable capacity 512 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: interface down eth1: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 4.19.41-Unraid x86_64 OpenSSL: 1.1.1b I started outputting the syslog to the Flash drive so I could get sometype of logging because after about 24hours Unraid is totally non-responding from the console or WebGUI. Troubleshooting so far: 1) Had mother-board RMA'd 2) Drop ram down from 32gb to 16gb but still crashed. 3) Turned off all VM's. I could really use some help; I'm not sure where togo from here. syslog-crash2019.05.29.zip
May 29, 20197 yr Check your clock "Clock Unsynchronized" This may not be your issue but I had it in the past and it is listed as an error in your logs.
May 30, 20197 yr Author I've ran memtest twice and ram checks out fine... DateTime is set use NTP and pointed to pool.ntp.org; everything seems fine here. I just changed out Power-Supply so we'll see if it crashes tonight.
June 3, 20197 yr Author Switched to a new power supply AND Switched out RAM also, still crashing. syslog
June 4, 20197 yr Author Upgraded to the recently released firmware of MB and server has been stable for 24+ hours now.
Archived
This topic is now archived and is closed to further replies.