horrorhound Posted May 29, 2019 Share Posted May 29, 2019 New server which Unraid was migrated older machine which ran great for years.... New Build where Unraid Crashing: Model: Custom M/B: Micro-Star International Co., Ltd. MEG X399 CREATION (MS-7B92) Version 1.0 - s/n: IB16121592 BIOS: American Megatrends Inc. Version 1.20. Dated: 11/14/2018 CPU: AMD Ryzen Threadripper 2950X 16-Core @ 3500 MHz HVM: Enabled IOMMU: Enabled Cache: 1536 KiB, 8192 KiB, 32768 KiB Memory: 16 GiB DDR4 (max. installable capacity 512 GiB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: interface down eth1: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 4.19.41-Unraid x86_64 OpenSSL: 1.1.1b I started outputting the syslog to the Flash drive so I could get sometype of logging because after about 24hours Unraid is totally non-responding from the console or WebGUI. Troubleshooting so far: 1) Had mother-board RMA'd 2) Drop ram down from 32gb to 16gb but still crashed. 3) Turned off all VM's. I could really use some help; I'm not sure where togo from here. syslog-crash2019.05.29.zip Quote Link to comment
ucliker Posted May 29, 2019 Share Posted May 29, 2019 Check your clock "Clock Unsynchronized" This may not be your issue but I had it in the past and it is listed as an error in your logs. Quote Link to comment
horrorhound Posted May 30, 2019 Author Share Posted May 30, 2019 I've ran memtest twice and ram checks out fine... DateTime is set use NTP and pointed to pool.ntp.org; everything seems fine here. I just changed out Power-Supply so we'll see if it crashes tonight. Quote Link to comment
horrorhound Posted June 3, 2019 Author Share Posted June 3, 2019 Switched to a new power supply AND Switched out RAM also, still crashing. syslog Quote Link to comment
horrorhound Posted June 4, 2019 Author Share Posted June 4, 2019 Upgraded to the recently released firmware of MB and server has been stable for 24+ hours now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.