balsman225 Posted May 31, 2019 Share Posted May 31, 2019 (edited) Hello all - I Need some assistance. My server runs great on 6.5.3 - runs months without issues. When I try to upgrade to 6.6.7, or the last attempt 6.7, my server will crash after a few days. My most recent attempt was on Tues. - I backed up my flash drive, formatted it, used the USB creator to install 6.7 and then restored my config folder. Booted up the server and ran fine until today. GUI, network and shared were all unresponsive. I was able to get to the local console and copy the syslog but could not get a diagnostic bundle (just hung at “Starting diagnostics collection”). I rebooting the server and its currently running a parity check, I collected a diag just even though it would have been better before the reboot. I also ran a memtest for 24 hours without any errors so don't think its a hardware issue since it had been running fine on 6.5.3. I’m a bit at a loss what is causing the issues with the server post 6.5.3 - any guidance would be appreciated. cargo-diagnostics-20190531-0041.zip syslog-2019.txt Edited May 31, 2019 by balsman225 Quote Link to comment
JorgeB Posted May 31, 2019 Share Posted May 31, 2019 Enables syslog server and mirror to flash, maybe it will catch something. Quote Link to comment
balsman225 Posted May 31, 2019 Author Share Posted May 31, 2019 12 hours ago, johnnie.black said: Enables syslog server and mirror to flash, maybe it will catch something. Got it enabled - thanks. Quote Link to comment
balsman225 Posted June 1, 2019 Author Share Posted June 1, 2019 (edited) Another Crash today - Here is what was displayed on the Console. Also attaching the syslog from the flash drive. Around 4:26PM Central time is when I got the notification from uptime robot that is was down. in the syslog around "Jun 1 16:41:10" would have been when the server was rebooted. Any help would be approached to see what is causing this. I think Im going to roll back to 6.5.3 if the issue isn't something obvious. Thanks! syslog Edited June 1, 2019 by balsman225 Quote Link to comment
balsman225 Posted June 1, 2019 Author Share Posted June 1, 2019 Doing some digging in the forums and my issue may be similar to this one - The strange part is that user Hoopster stated they see this issue with macvlan all the way back to 6.5.0 My server was running perfectly fine on 6.5.3 with the same setup. Quote Quote Link to comment
balsman225 Posted June 3, 2019 Author Share Posted June 3, 2019 Moved all docker traffic to a dedicated interface (br2) - leaving br0 (bond of eth0 and eth1) for other traffic. I was hoping this could alleviate the potential problems with the macvlan issue with br0 and static IPed containers. But I had another crash today. I formatted my flash and I’m going back to 6.5.3 for now since I know my setup will work fine with that. Quote Link to comment
balsman225 Posted June 14, 2019 Author Share Posted June 14, 2019 10 day uptime so for once back on 6.5.3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.