lotekjunky Posted June 10, 2019 Share Posted June 10, 2019 I created a new share and set it up as NFS, secure and exported. 'showmount -e 192.168.1.19' shows the exported mount. 'exportfs -v' lists the mount too, but it shows as 'ro'. When I look at /etc/exports, it is also listed as RO there. I see mention of "rules" for NFS on this forum, but I cannot find where to add or change them in Unraid 6.7.0. I also can't find any semi-recent documentation on this... there is an "unofficial manual" for unraid V5, but that's so old... Can anyone please help? Quote Link to comment
limetech Posted June 10, 2019 Share Posted June 10, 2019 Right, for NFS the security modes map to entries in /etc/exports as follows (example share name is Test): For Public: "/mnt/user/Test" -async,no_subtree_check,fsid=100 *(sec=sys,rw,insecure,anongid=100,anonuid=99,all_squash) For Secure: "/mnt/user/Test" -async,no_subtree_check,fsid=100 *(sec=sys,ro,insecure,anongid=100,anonuid=99,all_squash) If Private has been selected (and click Apply) a new input field labeled Rule will appear. Whatever you type will replace the third field in the exports line: "/mnt/user/Test" -async,no_subtree_check,fsid=100 <what you type goes here> Hence, for NFS, Public means read/write for anyone; Secure means read-only for everyone; Private gives you control to set whatever you want. The 'fsid' value is established when the share is first created and will retain that value for as long as the share exists. 1 Quote Link to comment
lotekjunky Posted June 10, 2019 Author Share Posted June 10, 2019 Thank you so much, I have it working now! I could not figure out where the RULE field was... I have this share mounted as an ESXi datastore and it's actually working. w00t! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.