jluna Posted May 25, 2021 Share Posted May 25, 2021 Remote access has stopped working for me after updating to 4.6.1.0 and I can't figure out how to fix it. Anyone have any idea why? Quote Link to comment
Janne Posted May 27, 2021 Share Posted May 27, 2021 (edited) I have a problem since I updated to the latest emby version yesterday. Today when playing a movie via Emby on my shield Emby stopped working and the Shield client couldn't connect to the Emby Server anymore. So I checked and saw that my Cache of 250Gb is full. Since only Emby was affected I checked the emby files in my appdata folder (which is set to "prefer" regarding cache usage) and emby created a 2 log files that are more than 200GB big. embyserver-63757670400.txt - 73GB (created today at midnight) embyserver.txt - 135 GB (created just before emby stopped working today) Any idea what's happening here? I did not have that problem with any previous version of Emby. Can I just delete those log files and will Emby start building up a new huge logfile then? Thank you in advance edit: When trying to restart Emby Docker I get an "Execution Error - Error Code 403" Edited May 27, 2021 by Janne Quote Link to comment
saarg Posted May 27, 2021 Share Posted May 27, 2021 5 minutes ago, Janne said: I have a problem since I updated to the latest emby version yesterday. Today when playing a movie via Emby on my shield Emby stopped working and the Shield client couldn't connect to the Emby Server anymore. So I checked and saw that my Cache of 250Gb is full. Since only Emby was affected I checked the emby files in my appdata folder (which is set to "prefer" regarding cache usage) and emby created a 2 log files that are more than 200GB big. embyserver-63757670400.txt - 73GB (created today at midnight) embyserver.txt - 135 GB (created just before emby stopped working today) Any idea what's happening here? I did not have that problem with any previous version of Emby. Can I just delete those log files and will Emby start building up a new huge logfile then? Thank you in advance Check if you enabled debug logging. You can safely delete those logs. Quote Link to comment
Janne Posted May 27, 2021 Share Posted May 27, 2021 (edited) 12 minutes ago, saarg said: Check if you enabled debug logging. You can safely delete those logs. Thank you for the reply. I could delete the files but the error message still came up when trying to restart the Emby docker. Then I realised that not only the Emby docker didn't work but all the docker containers I updated yesterday (Emby, MariaDB, Nextcloud). All the other ones that were not updated yesterday still worked. Anyway, I could delete the log files and after restarting the server all docker containers (incl. emby) could be started again. I'll keep an eye on the emby logs. I hope they don't fill up my Cache drive every other day now. edit: Debug Logging was disabled all the time. Edited May 27, 2021 by Janne Quote Link to comment
xrqp Posted June 16, 2021 Share Posted June 16, 2021 (edited) How do I setup paths for this Emby container for two tv folders? Here are the two I want: /data/media/tv/ (used for tv shows from Usenet) /data/media/tv antenna/ (used for tv shows from antenna and Emby DVR) My share is "data". Here is for 1. data/media/tv Do I need to create a another container path for "tv antenna" for recordings? If yes, what do I put for container path and host path? The following did not work: Edited June 16, 2021 by xrqp Quote Link to comment
saarg Posted June 16, 2021 Share Posted June 16, 2021 2 hours ago, xrqp said: How do I setup paths for this Emby container for two tv folders? Here are the two I want: /data/media/tv/ (used for tv shows from Usenet) /data/media/tv antenna/ (used for tv shows from antenna and Emby DVR) My share is "data". Here is for 1. data/media/tv Do I need to create a another container path for "tv antenna" for recordings? If yes, what do I put for container path and host path? The following did not work: You can't use the same container path in two folder mappings. They need to be different. Quote Link to comment
thunderz Posted June 21, 2021 Share Posted June 21, 2021 All the sudden my emby is broken The container has access to the internet But emby itself cannot access the internet. I have tried other containers and they work fine I'm not sure what has changed but for example when it fetches the news here is what it says in the log: 021-06-21 00:22:30.987 Error Server: Error processing request *** Error Report *** Version: 4.6.3.0 Command line: /app/emby/EmbyServer.dll -programdata /config -ffdetect /app/emby/ffdetect -ffmpeg /app/emby/ffmpeg -ffprobe /app/emby/ffprobe -restartexitcode 3 Operating system: Linux version 5.10.28-Unraid (root@Develop) (gcc (GCC) 9.3.0, GNU ld version 2.33.1-slack15) #1 SMP Wed Apr 7 08:23:18 PDT 2021 Framework: .NET Core 3.1.13 OS/Process: x64/x64 Runtime: app/emby/System.Private.CoreLib.dll Processor count: 8 Data path: /config Application path: /app/emby System.ArgumentNullException: System.ArgumentNullException: Value cannot be null. (Parameter 'source') at System.Linq.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument) at System.Linq.OrderedEnumerable`2..ctor(IEnumerable`1 source, Func`2 keySelector, IComparer`1 comparer, Boolean descending, OrderedEnumerable`1 parent) at System.Linq.Enumerable.OrderByDescending[TSource,TKey](IEnumerable`1 source, Func`2 keySelector) at Emby.Server.Implementations.News.NewsService.GetProductNewsInternal(NewsQuery query) at Emby.Server.Implementations.News.NewsService.GetProductNews(NewsQuery query) at MediaBrowser.Api.NewsService.Get(GetProductNews request) at Emby.Server.Implementations.Services.ServiceController.Execute(HttpListenerHost appHost, Object requestDto, IRequest req) at Emby.Server.Implementations.Services.ServiceHandler.ProcessRequestAsync(HttpListenerHost appHost, IRequest httpReq, IResponse httpRes, RestPath restPath, String responseContentType, CancellationToken cancellationToken) at Emby.Server.Implementations.HttpServer.HttpListenerHost.RequestHandler(IRequest httpReq, ReadOnlyMemory`1 urlString, ReadOnlyMemory`1 localPath, CancellationToken cancellationToken) Source: System.Linq TargetSite: Void ThrowArgumentNullException(System.Linq.ExceptionArgument) If I try fetching my livetv tuner this is what returns 2021-06-21 00:26:54.571 Error M3UTunerHost: Error getting channel list *** Error Report *** Version: 4.6.3.0 Command line: /app/emby/EmbyServer.dll -programdata /config -ffdetect /app/emby/ffdetect -ffmpeg /app/emby/ffmpeg -ffprobe /app/emby/ffprobe -restartexitcode 3 Operating system: Linux version 5.10.28-Unraid (root@Develop) (gcc (GCC) 9.3.0, GNU ld version 2.33.1-slack15) #1 SMP Wed Apr 7 08:23:18 PDT 2021 Framework: .NET Core 3.1.13 OS/Process: x64/x64 Runtime: app/emby/System.Private.CoreLib.dll Processor count: 8 Data path: /config Application path: /app/emby System.ArgumentException: System.ArgumentException: Stream was not writable. at System.IO.StreamWriter..ctor(Stream stream, Encoding encoding, Int32 bufferSize, Boolean leaveOpen) at Emby.Common.Implementations.Serialization.FormattingStreamWriter..ctor(Stream stream, Encoding encoding, Int32 bufferSize, Boolean leaveOpen, IFormatProvider formatProvider) at Emby.Common.Implementations.Serialization.JsonSerializer.SerializeToStream(Object obj, Stream stream) at Emby.Common.Implementations.Serialization.JsonSerializer.SerializeToFile(Object obj, String file) at Emby.LiveTV.TunerHosts.BaseTunerHost.GetChannels(TunerHostInfo host, CancellationToken cancellationToken) Source: System.Private.CoreLib TargetSite: Void .ctor(System.IO.Stream, System.Text.Encoding, Int32, Boolean) 2021-06-21 00:26:54.575 Error LiveTV: Error getting channels *** Error Report *** Version: 4.6.3.0 Command line: /app/emby/EmbyServer.dll -programdata /config -ffdetect /app/emby/ffdetect -ffmpeg /app/emby/ffmpeg -ffprobe /app/emby/ffprobe -restartexitcode 3 Operating system: Linux version 5.10.28-Unraid (root@Develop) (gcc (GCC) 9.3.0, GNU ld version 2.33.1-slack15) #1 SMP Wed Apr 7 08:23:18 PDT 2021 Framework: .NET Core 3.1.13 OS/Process: x64/x64 Runtime: app/emby/System.Private.CoreLib.dll Processor count: 8 Data path: /config Application path: /app/emby System.NullReferenceException: System.NullReferenceException: Object reference not set to an instance of an object. at Emby.LiveTV.EmbyTV.GetTunerChannelsAsync(CancellationToken cancellationToken) Source: Emby.LiveTV TargetSite: Void MoveNext() Quote Link to comment
Derek_ Posted November 17, 2021 Share Posted November 17, 2021 (edited) Hi, thanks for this Docker. I've been using it for a while now (and sent a small donation quite a while ago ) I got an email on 15/11 saying a new version of the Emby Docker is available: emby [2a2b..5c38]. My system is set to auto update Dockers, so i assume it has as in the Docker view it says "up-to-date". First time using Emby since the 14th i think, i now get "Forbidden" (just Forbidden, not 404 or anything else) via WebUI and the mobile app can't connect to the NAS. I did "Fix Common Problems" but it didn't find anything with my unRAID setup. Emby seems to start ok, it says it's running. I restarted it, and even rebooted the server. I had a look at the directory via the Console menu ls -l and i notice that some files and directories have root:root while others are abc:users. I don't have any 'abc' user. No idea if that's related to my problem. I'm not very familiar with Docker. I tried to look at the log, but there's no date-stamps and doesn't seem to say anything like "error" or such and i don't have a clue what i'm looking for. Suggestions/troubleshooting steps appreciated Edited November 17, 2021 by Derek_ clarify error Quote Link to comment
timneale Posted November 17, 2021 Share Posted November 17, 2021 Hi, I've recenlty switched to this docker to make use of the Nvidia Transcoding. All has been running fine since switching from my previous Emby docker. Yesterday this docker did an update and now I'm nto able to refresh any of my metadata. It seems like Emby can't connect to the outside. I can still access Emby remotely. Bit of a noob when it comes to problems like this. Thanks for any help. embyserver.txt Quote Link to comment
citizen5 Posted November 17, 2021 Share Posted November 17, 2021 49 minutes ago, timneale said: Hi, I've recenlty switched to this docker to make use of the Nvidia Transcoding. All has been running fine since switching from my previous Emby docker. Yesterday this docker did an update and now I'm nto able to refresh any of my metadata. It seems like Emby can't connect to the outside. I can still access Emby remotely. Bit of a noob when it comes to problems like this. Thanks for any help. embyserver.txt 782.8 kB · 0 downloads Same exact issue since the update. Quote Link to comment
timneale Posted November 18, 2021 Share Posted November 18, 2021 1 hour ago, citizen5 said: Same exact issue since the update. Just checked and there is an update to the docker now. Looks like its fixed my issues. Quote Link to comment
spiderben25 Posted November 19, 2021 Share Posted November 19, 2021 (edited) On 11/17/2021 at 12:41 PM, Derek_ said: Hi, thanks for this Docker. I've been using it for a while now (and sent a small donation quite a while ago ) I got an email on 15/11 saying a new version of the Emby Docker is available: emby [2a2b..5c38]. My system is set to auto update Dockers, so i assume it has as in the Docker view it says "up-to-date". First time using Emby since the 14th i think, i now get "Forbidden" (just Forbidden, not 404 or anything else) via WebUI and the mobile app can't connect to the NAS. I did "Fix Common Problems" but it didn't find anything with my unRAID setup. Emby seems to start ok, it says it's running. I restarted it, and even rebooted the server. I had a look at the directory via the Console menu ls -l and i notice that some files and directories have root:root while others are abc:users. I don't have any 'abc' user. No idea if that's related to my problem. I'm not very familiar with Docker. I tried to look at the log, but there's no date-stamps and doesn't seem to say anything like "error" or such and i don't have a clue what i'm looking for. Suggestions/troubleshooting steps appreciated Hello, Same problem here since an update a few days ago. Last update didn’t fix it. Did you find a solution? Emby has been working fine for months and now all I’m getting is a Forbidden message when trying to access the web ui. EDIT : this did the trick https://emby.media/community/index.php?/topic/103521-docker/ I guess since Emby is running in Docker it does not recognize properly the local subnet as local. Edited November 19, 2021 by spiderben25 found solution Quote Link to comment
Derek_ Posted November 20, 2021 Share Posted November 20, 2021 8 hours ago, spiderben25 said: Hello, Same problem here since an update a few days ago. Last update didn’t fix it. Did you find a solution? Emby has been working fine for months and now all I’m getting is a Forbidden message when trying to access the web ui. EDIT : this did the trick https://emby.media/community/index.php?/topic/103521-docker/ I guess since Emby is running in Docker it does not recognize properly the local subnet as local. You enabled remote access? Isn't that what you do when you want it to be accessible outside the LAN and into the WAN? (Granted you'd need to open ports on the router as well i think.) Quote Link to comment
spiderben25 Posted November 20, 2021 Share Posted November 20, 2021 I think local subnet detection is faulty since last Emby update. I had to enable remote access to get access back, then in the network settings I manually added my local network subnet and only then I could disable remote access. Before doing that last bit, the server info page showed the internal network Docker address (176.something) instead of the usual 192.168.0.xxx. Quote Link to comment
Viper-694 Posted November 21, 2021 Share Posted November 21, 2021 (edited) On 11/20/2021 at 2:44 AM, spiderben25 said: I think local subnet detection is faulty since last Emby update. I had to enable remote access to get access back, then in the network settings I manually added my local network subnet and only then I could disable remote access. Before doing that last bit, the server info page showed the internal network Docker address (176.something) instead of the usual 192.168.0.xxx. I added 192.168.0.0/24 to local networks but I still get forbidden if I turn remote access back off. I guess I'll leave remote access on. Edit: Never mind. I'm a noob. Changed that to 192.168.1.0/24 and it works. Edited November 21, 2021 by Viper-694 Quote Link to comment
jluna Posted July 19, 2022 Share Posted July 19, 2022 (edited) Hello all for the past few days emby has been giving me an error saying "check for plugins updates failed". Clicking on the overview on the plugin it says "Access to the path '/config/plugins/MovieDb.dll' is denied". Not sure what can be causing this all of a sudden. Any insight would be much appreciated. Edited July 19, 2022 by jluna Quote Link to comment
pukaokole Posted July 29, 2022 Share Posted July 29, 2022 I am unable to get hardware acceleration working. I've tried to follow many of the guides online but the template has changed. Do I just need to add the item in the spaceinvader one video (Nvidia Visible Drivers) thats not in the template or am I missing something else completely. It's been a bit of a mess since my upgrade, in Binhex-emby my HD homerun quit working and no HW Transcoding, in embyserver my TV folder only 6 shows are seen (out of 119) but HW transcoding and Live TV work perfectly, and in linuxserver live tv and all folders work perfectly but no HW transcode. Quote Link to comment
thunderclap Posted August 8, 2022 Share Posted August 8, 2022 On 2/12/2020 at 11:56 AM, TheFreemancer said: I've followed the SpaceInvader tutorial for Hardware transcoding. I have a GTX 1060 here which is capable of hevc decoding and encoding. I can do hardware encoding and decoding of h.264 just fine. But when I try to play hevc content like a uhd bluray remux that is 4k hevc it uses software using my cpu. It can see the gpu on emby advanced tab, it even shows it for hevc encoding and decoding both checked but it uses software for some odd reason. Is there anything special I need to do to support HEVC? I saw this post from a couple years ago that never was answered. I, too, am experiencing this, where anything 1080p ad below the IGPU works fine but when trying to decode 4K it reverts to CPU as default. Any idea how to fix? I did notice in the first post to this thread it says to "Edit your go file and add modprobe i915 to it, save and reboot." I never did that because it wasn't described that way in the hub for this container. Is that addition still necessary, or is it no longer required and was just missed in updating instructions? Quote Link to comment
thunderclap Posted August 9, 2022 Share Posted August 9, 2022 Update on my post above. It appears there's a bug in this docker. I installed the official Emby one and 4k is passed through to the iGPU for transcoding no problem. Hopefully this issue can be fixed. Quote Link to comment
Jangle Posted September 25, 2022 Share Posted September 25, 2022 Latest Emby update, dotainer start failure 'unable to start service init-emby: command exited 1' Quote Link to comment
lovingHDTV Posted September 27, 2022 Share Posted September 27, 2022 the latest update doesn't start for me either. I get "Failed to create CoreCLR, HRESULT: 0x8070008 Quote Link to comment
lovingHDTV Posted September 30, 2022 Share Posted September 30, 2022 I changed over to the official docker and everything works again Quote Link to comment
goombaunraid Posted November 5, 2022 Share Posted November 5, 2022 On 9/27/2022 at 8:19 AM, lovingHDTV said: the latest update doesn't start for me either. I get "Failed to create CoreCLR, HRESULT: 0x8070008 Same issue, any idea? Quote Link to comment
Skitals Posted December 8, 2022 Share Posted December 8, 2022 (edited) No problems here. A tip for anyone is looking to get comskip working in this container. I for whatever reason couldn't get comskip to compile with statically linked libraries. I found the pre-compiled comskip from channelsdvr (channelsdvr_nvidia in community apps) works in this docker. Put it in your emby appdata so it is persistent. Edit: Wow, I overcomplicated that. Thanks for the universal-package-install docker mod, you can install comskip really easily by adding two variables to your emby container. Variable Key: DOCKER_MODS Value: linuxserver/mods:universal-package-install Variable Key: INSTALL_PACKAGES Value: comskip 🤯 This was the one feature I was missing transitioning from plex. Comskip + ComSkipper emby plugin fixed me up. Edited December 8, 2022 by Skitals Quote Link to comment
J05u Posted February 28, 2023 Share Posted February 28, 2023 Any idea how make external access via reverse proxy and without cloudflare? I know it's against cloudflare TOS Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.