Pixxelcrasher Posted June 11, 2019 Share Posted June 11, 2019 Hello I have two 3 TB harddrives and one 4 TB parity disk... But Unraid shows me only 2.2 TB capacity in the overview tab ... But But the smart report says the right size( 3,3,4 TB).... My filesystem is xfs. What can I do ? Thanks for help Gesendet von meinem SM-G950F mit Tapatalk Quote Link to comment
itimpi Posted June 11, 2019 Share Posted June 11, 2019 Not sure what you mean by the 'Overview' tab? Perhaps providing a screen shot showing this would make in clearer. Quote Link to comment
Pixxelcrasher Posted June 11, 2019 Author Share Posted June 11, 2019 I mean this... Quote Link to comment
JonathanM Posted June 11, 2019 Share Posted June 11, 2019 Looks like your hard drive controller is limiting the size of the disks. Post diagnostics. 1 Quote Link to comment
Pixxelcrasher Posted June 11, 2019 Author Share Posted June 11, 2019 tower-diagnostics-20190611-1259.zip This is my diagnostics... " Looks like your hard drive controller is limiting the size of the disks."But in the smart report, it shows me the right capacity : Quote Link to comment
Squid Posted June 11, 2019 Share Posted June 11, 2019 tower-diagnostics-20190611-1259.zip This is my diagnostics... " Looks like your hard drive controller is limiting the size of the disks."But in the smart report, it shows me the right capacity :Without looking at the diagnostics many older controllers only support drives up to 2.2G and will cap the storage at that. Smart will always show what the drive reportsSent via telekinesis Quote Link to comment
Pixxelcrasher Posted June 11, 2019 Author Share Posted June 11, 2019 (edited) So give it any controller PCI-card for that? Can you look in the diagnostics please if its right? Edited June 11, 2019 by Pixxelcrasher Quote Link to comment
JorgeB Posted June 11, 2019 Share Posted June 11, 2019 1st gen LSI SAS controllers only support up to 2TB, you need SAS2 or SAS3 for >2TB support. Quote Link to comment
Pixxelcrasher Posted June 11, 2019 Author Share Posted June 11, 2019 So my SATA controller only supports 2.2TB? Can you recommend any controller ? Quote Link to comment
JorgeB Posted June 11, 2019 Share Posted June 11, 2019 Any LSI with a SAS2008/2308/3008 chipset in IT mode, e.g., 9201-8i, 9211-8i, 9207-8i, 9300-8i, etc and clones, like the Dell H200/H310 and IBM M1015, these latter ones need to be crossflashed. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.