Jump to content
Denner

unRAID 6.6.7 crashed, cant figure out why and now the sys log is reporting HPA detected ?

4 posts in this topic Last Reply

Recommended Posts

Tower diagnostics is attached and full system info is at the bottom of the post, so here we go :)

 

My unRAID server 6.6.7 have been running with no issues since I switched out my old Gigabyte GA-MA74GM-S2H motherboard with my current MSI - 785GTM-E45 (MS-7549), I switched out the Gigabyte because of the dreaded  HPA issue.

An hour ago unRAID crashed and rebooted on me, while doing nothing but being on and I have no ide why,  and cant seem to figure it out by looking at the system log, but what I forud, by looking though the log is that HPA seems to be back on one of my disks :(


Right now unRAID is doing a Parity-Check and all seems to be working as it should, but full check will take around 18 hours...

 

So I kind of got 2 questions here:

1. Can anyone pinpoint the reason for the crash and reboot in the system log, I can not because it is beyond my skill set, so to speak ?

2. Anyone have any ide why HPA is back again and maybe what to do about it, because as far as I know it should not be an issue with my current MSI - 785GTM-E45 (MS-7549) motherboard ?

 

Any help is greatly appreciated, because I use my unRAID for all media streaming and data back up in my house, and right now I have 33TB of data on my 40TB unRAID server 😮

 

Cheers...

Dennis

 

The system specs:

M/B: MICRO-STAR INTERNATIONAL CO.,LTD - 785GTM-E45 (MS-7549)

CPU: AMD Athlon™ II X2 240e @ 2800

Memory: 4 GB (max. installable capacity 8 GB)

[0:0:0:0]disk Kingston DataTraveler 2.0 1.00 /dev/sda 1.02GB

[2:0:0:0]disk ATA WDC WD10EADS-00L 1A01 /dev/sdb 1.00TB

[7:0:0:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdc 8.00TB

[8:0:0:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdd 8.00TB

[9:0:0:0]disk ATA ST8000DM004-2CX1 0001 /dev/sde 8.00TB

[10:0:0:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdf 8.00TB

[11:0:0:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdg 8.00TB

[12:0:0:0]disk ATA ST8000DM004-2CX1 0001 /dev/sdh 8.00TB

 

tower-diagnostics-20190612-1913.zip

Share this post


Link to post

Well unRAID just finished doing the Parity-Check and there was no errors, so that is great :)

 

I have attached the new diagnostics log from after the Parity-Check, if that can help anyone to figure out what went wrong and why HPA seems to be back, hope it helps :)

 

Cheers...

Dennis

tower-diagnostics-20190613-1516.zip

Share this post


Link to post

Diags after rebooting can't show why it crashed, and the HPA just needs to be removed or ignored, it wound't appear on its own.

Share this post


Link to post
2 minutes ago, johnnie.black said:

Diags after rebooting can't show why it crashed, and the HPA just needs to be removed or ignored, it wound't appear on its own.

Okay thanks, then I will be looking for a new motherboard again, since the MSI - 785GTM-E45 (MS-7549) must suffer from the HPA issue as well, a bit of a bummer but it is what it is :) 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.