(SOLVED) Drive Keeps Failing

[madhatter01]

I recently bought a new 1TB SSD for my cache drive to replace a smaller SSD. After installing it I had a lot of issues with the cache drive, mostly disconnecting almost daily. Ended up buying a new SATA cable. Now it will go several days before it fails. I'm not ruling out a bad SSD but wanted to have someone look at my logs first before I go that far.  All the SMART checks so far have came back fine. 

Just today it failed during a parity check but in the past it would fail at random times. I've attached the diagnostics. 

tower-diagnostics-20190618-0130.zip

[JorgeB]

You should try using the SSD on one of the Intel onboard ports, since Marvell controllers are known to drop devices.

[madhatter01]

I am using the onboard ports for this, the SSD is sdo. I have not tried a new port on the motherboard though. 

[JorgeB]

1 minute ago, madhatter01 said:

I am using the onboard ports for this

Yes, but not the Intel ones.

 

8 hours ago, johnnie.black said:

one of the Intel onboard ports

 

[madhatter01]

I guess I assumed all the motherboard SATA ports would use the same drivers. I do have two Marvell cards installed. Is there way to tell which ports are Intel? Thanks for the help so far.

[JorgeB]

7 hours ago, madhatter01 said:

Is there way to tell which ports are Intel?

There's always the manual.

 

 

[madhatter01]

I feel really stupid for not even thinking about that. 🤦‍♂️ Read the manual and swapped the SSD over to Intel ports. Guess I need to work to get my last HD off the Marvel port. I also updated the BIOS for good measure. Thanks for the help.