hellarda Posted June 20, 2019 Share Posted June 20, 2019 Hello, Seem to be having quite a few issues with my Unraid Install. It started after my cache drive filled. It refused to empty (mover did nothing) so I removed both cache devices and re-formatted, and then re added into the array. Ever since then I've been having CPU spikes and Dockers are sometimes not responding (UniFi Video is failing to record to disks on some occasions). At the same time, a parity check last week found 776 errors. Parity check is running again now, but only at about 2MB/sec. I have attached diag logs. Anyone have any idea what might be going on? Thanks hellard-server-diagnostics-20190620-1057.zip Quote Link to comment
JorgeB Posted June 20, 2019 Share Posted June 20, 2019 20 minutes ago, hellarda said: Parity check is running again now, but only at about 2MB/sec Stop writing to the array during the check, mostly to disk7 when the diags were taken, and it should go back to normal. Quote Link to comment
hellarda Posted June 20, 2019 Author Share Posted June 20, 2019 Just now, johnnie.black said: Stop writing to the array during the check, mostly to disk7 when the diags were taken, and it should go back to normal. I've never had this before - I constantly write to some drives as CCTV is being recorded, so can't really stop that Quote Link to comment
JorgeB Posted June 20, 2019 Share Posted June 20, 2019 Parity check will always be considerably slower if there are writes to the array at the same time, to see if there are other problems you'd need to stop all writes, even if just temporarily, and grab new diags at that time if speed doesn't go back to normal. Quote Link to comment
hellarda Posted June 20, 2019 Author Share Posted June 20, 2019 18 minutes ago, johnnie.black said: Parity check will always be considerably slower if there are writes to the array at the same time, to see if there are other problems you'd need to stop all writes, even if just temporarily, and grab new diags at that time if speed doesn't go back to normal. Thanks - have tried stopping everything and the parity check speed has jumped back up again - and CPU usage is back to normal. Still no idea why CPU and mem usage are so high with dockers started (everything just seems to grind to a halt) - I'm only running one VM, and a handful of dockers on a pretty powerful xeon... Quote Link to comment
testdasi Posted June 20, 2019 Share Posted June 20, 2019 58 minutes ago, hellarda said: Thanks - have tried stopping everything and the parity check speed has jumped back up again - and CPU usage is back to normal. Still no idea why CPU and mem usage are so high with dockers started (everything just seems to grind to a halt) - I'm only running one VM, and a handful of dockers on a pretty powerful xeon... You can try starting each docker and see which one causes the problem. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.