Hey All,

 

Still on 4.3.3 with my media server and still with an original Asus board. I have been upgrading my drives over the last couple weeks. parity to 2tb and then three 750 to 2tb drives. last night the power went out in the middle of the night and I did not have time to get to the system before the backup died. So on reboot at 2am last evening it started parity check on a 2tb drive this morning at 7am it was about 30% finished with 1800 minutes to go at 14kb/s tonight I get home at 5pm and it is only at 42% with 98 errors and still at 14kb/s normally it has sped up atleast to 25kb/s. with the new drive installs I have been moving several large .avi and .mkv files >=20Gb to the new larger drives etc and I have not completed a parity check since the last drive upgrade of about two weeks ago. The file moving has been happening over the last week or so. I normally do my monthly parity check the last sunday of every month and it is always 0 sync errors and this is the first time it has ever been this slow.

 

I have 0 read or write errors and I do not use User Shares.

 

any thoughts,

 

Thanks,

 

Dave

Finished the parity check and slowly crept up to 29KB/s I checked the syslog and it is 2Mb of this.

 

Oct 30 00:00:00 Tower kernel: ReiserFS: warning: is_tree_node: node level 0 does not match to the expected one 1

Oct 30 00:00:00 Tower kernel: ReiserFS: md2: warning: vs-5150: search_by_key: invalid format found in block 110071691. Fsck?

Oct 30 00:00:00 Tower kernel: ReiserFS: md2: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 603 0x0 SD]

Oct 30 00:00:00 Tower kernel: ReiserFS: warning: is_tree_node: node level 0 does not match to the expected one 1

 

rgds,

 

Dave

Finished the parity check and slowly crept up to 29KB/s I checked the syslog and it is 2Mb of this.

 

Oct 30 00:00:00 Tower kernel: ReiserFS: warning: is_tree_node: node level 0 does not match to the expected one 1

Oct 30 00:00:00 Tower kernel: ReiserFS: md2: warning: vs-5150: search_by_key: invalid format found in block 110071691. Fsck?

Oct 30 00:00:00 Tower kernel: ReiserFS: md2: warning: vs-13070: reiserfs_read_locked_inode: i/o failure occurred trying to find stat data of [2 603 0x0 SD]

Oct 30 00:00:00 Tower kernel: ReiserFS: warning: is_tree_node: node level 0 does not match to the expected one 1

 

rgds,

 

Dave

You have file system corruption on disk2  ( /dev/md2 ).

 

You need to follow the instructions in the wiki to fix it.

http://lime-technology.com/wiki/index.php?title=Check_Disk_Filesystems

Hi Joe,

 

you always seem to come to my rescue here is the check report.

 

Tower login: root
Linux 2.6.24.4-unRAID.
root@Tower:~# cd
root@Tower:~# samba stop
root@Tower:~# umount /dev/md2
root@Tower:~# resiserfsck --check /dev/md2
-bash: resiserfsck: command not found
root@Tower:~# reiserfsck --check /dev/md2
reiserfsck 3.6.19 (2003 www.namesys.com)

*************************************************************
** If you are using the latest reiserfsprogs and  it fails **
** please  email bug reports to [email protected], **
** providing  as  much  information  as  possible --  your **
** hardware,  kernel,  patches,  settings,  all reiserfsck **
** messages  (including version),  the reiserfsck logfile, **
** check  the  syslog file  for  any  related information. **
** If you would like advice on using this program, support **
** is available  for $25 at  www.namesys.com/support.html. **
*************************************************************

Will read-only check consistency of the filesystem on /dev/md2
Will put log info to 'stdout'

Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
###########
reiserfsck --check started at Sat Oct 23 13:58:08 2010
###########
Replaying journal..
Reiserfs journal '/dev/md2' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Comparing bitmaps..finished
Checking Semantic tree:
finished
No corruptions found
There are on the filesystem:
        Leaves 241152
        Internal nodes 1526
        Directories 602
        Other files 3085
        Data block pointers 243122825 (4 of them are zero)
        Safe links 0
###########
reiserfsck finished at Sat Oct 23 15:07:51 2010
###########
root@Tower:~#

 

 

Thanks,

 

Dave

It is very good that your check of the file system shows no corruption.  It does make me wonder why the operating system found all the errors it did.  To me it would then indicate a problem with the memory, or the power supply, etc...

 

If you have not recently checked, make sure the memory voltage timing, and clock speed is set correctly for your specific memory strips.

 

Perform a memory test, preferably overnight, to ensure it is working correctly.

 

Joe L.

Joe,

 

Will do - LOL I have not touched the thing in about a year other than dust cleaning and hard drive upgrade. I am wondering now since I have added 4 2TB 2 - hitachi (inc parity) and 2 WD greens. it is drawing a little more on my PCP&C 750.  Is there an easy way to load up memtest just a boot disk or some other way. I will check the power supply in the am. If you notice the Date on my syslog. it is stating Oct 30 - We are not there yet. I am also using super micro 5-3 chassis in a 4U rack case with a wall of 120mm fans behind them.

 

This Asus board has always reported the wrong CPU speed since the day I installed it but pretty much trouble free...

 

THX,

 

Dave

Joe,

 

So I removed the cover this morning, got out my trusty PSU checker and checked all the main psu headers as well as the spliiters that I used for fans, cages etc and all voltages are perfect. I blew the dust out, reseated the sata connectors on the cards and the cages and I upgraded to 4.5.6 and rebooted. I copied memtest from the 4.5.6 dwnld to my flash drive as well. can I run memtest from a telnet window with the array running.

 

(SOLVED) - so I do not get the boot option to load memtest on startup.

 

Thanks,

 

Dave