mbc0 Posted May 4, 2020 Share Posted May 4, 2020 21 hours ago, John_M said: From the FAQ: Thank you for this but it doesn't quite cover what I am trying to achieve, I am currently on a 2 disk SSD Cache Pool which I want to replace with a single NVME cache Pool Can I do the following. 1, stop the array 2, remove one of the disks from the cache pool in the settings 3, add the new NVME into the pool 4, restart the array to let it balance 5, stop the array 6, remove the smaller ssd leaving just the larger nvme disk 7, start the array Is this correct? Thank you Quote Link to comment
John_M Posted May 4, 2020 Share Posted May 4, 2020 (edited) I thought I answered the question you asked. Let's have another go. Have a look at the FAQ entry immediately above the one I gave you, also by johnnie.black. Note the caveat that's underlined. Bad things could happen if you ignore it. So do the replacement, then do the removal. Edited May 4, 2020 by John_M Added warning. Quote Link to comment
mbc0 Posted May 4, 2020 Share Posted May 4, 2020 34 minutes ago, John_M said: I thought I answered the question you asked. Let's have another go. Have a look at the FAQ entry immediately above the one I gave you, also by johnnie.black. Note the caveat that's underlined. Bad things could happen if you ignore it. So do the replacement, then do the removal. Got it, thank you Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.