Hey all,

I am new to unraid and I need some help with fixing some issues I am having with it.

 

I have installed plex in docker and it keeps crashing but I think it could be an issue with the appdata folder.

 

I have a 1TB cache drive and its only using 17MB atm my plex folder is 40GB so it should be a lot larger if it was using the cache drive to hold it all.

 

I have set the appdata folder to use the cache drive and also stopped docker and started the move process as its set to yes for cache, but its not moving the appdata folder?

 

can anyone point me in the correct direction to fix this?

 

the other issue I have is the CPU keeps maxing out and I can't find a reason as to why?

as it does it when nothing is happening on the server. no plex nothing running?

 

here are my specs.

UNraid Version 6.7.1 2019-06-22

Processor: Intel® Core™ i7-3770K CPU @ 3.50GHz

Motherboard: ASUSTeK COMPUTER INC. - MAXIMUS V FORMULA

Memory: 16 GB (max. installable capacity 32 GB)
HDD: 6x 10TB Segate, 2x 10TB WD, 1x 1TB SSD 1x 500GB SSD Samsung Both are cache drives.
Video Card: NVIDIA Quadro P2000

 

Thanks for any help.

David

 

plex-server-diagnostics-20190701-0048.zip

Edited July 1, 20197 yr by David101
added diagnostics

1. Set the system share to cache-prefer.
2. Delete and recreate the docker image (Settings - Docker).
3. Run mover to get the rest of appdata moved to cache.
4. Use the Previous Apps feature on the Apps page, which will reinstall your dockers exactly as they were.

Thanks for the reply,

sorry for the slow response.

 

I have done all of the above and that has fixed the Cache issue, thank you for that.

 

my other issue is when data is copying over to the raid the CPU will max out and I can't use the server until it's finished.

 

thanks for any help.

 

plex-server-diagnostics-20190715-0244.zip

On 7/14/2019 at 10:45 PM, David101 said:

I have done all of the above

appdata and system shares still have some data on disk2. Are you sure you followed my instructions exactly and in that order? Mover can't move open files, so the docker service cannot be running when you run mover or it won't be able to move appdata and system. 

 

Try it like this instead:

1. Delete docker image
2. Run mover
3. Recreate docker image
4. Reinstall using Previous Apps

You can see which disk(s) each user share is using with the Compute feature on the User Shares page.