June 29, 20197 yr Hi all I'm getting the following error reported from the Fix Common Problems plugin: You may experience slow read/writes to cache. Write Cache should be enabled for better results. Post your diagnostics for other users to confirm this test and advise. NOTE: If this drive is connected to your server via USB, then this test and the fix may or may not work / be accurate as USB support for smartctl and hdparm is hit and missatlas-diagnostics-20190629-1039.zip Any ideas? Diagnostics attached
June 29, 20197 yr Probably a sata drive, enable cache with hdparm. To make it persistent, edit your go file.
June 30, 20197 yr Author This only came up after a second reboot for 6.7.2, not sure if it's related to the update as it was later on but I've made no changes to the drives
June 30, 20197 yr Community Expert That check is a relatively recent addition to FCP so it is highly likely that situation has always existed but it was not being reported.
June 30, 20197 yr Author Am I right in saying I need the following command? hdparm -W /dev/sdc hdparm -W /dev/sdb I have 2 cache drives so I guess both need it
June 30, 20197 yr https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/?tab=comments#comment-755621
June 30, 20197 yr Author 27 minutes ago, Squid said: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/?tab=comments#comment-755621 Thank you
Archived
This topic is now archived and is closed to further replies.