Spaceherpe Posted July 11, 2019 Share Posted July 11, 2019 I currently use Version: 6.6.1. I attempted to update to 6.6.2 using the upgrade option on the server....it failed. I attempted to upgrade via downloading>make bootable>failed. At one point, it loaded, but wasn't locatable. I even checked my router to locate an unidentified IP and nothing. This has become the norm, at least for me, when upgrading. For me, since 6.6.1 is working without any issues, I don't think I will be upgrading any time soon. I'm not willing to lose my server nor all of my current settings because of upgrades. The reason for this post is to see if anyone else is having the same issues? Quote Link to comment
Spaceherpe Posted July 11, 2019 Author Share Posted July 11, 2019 I forgot to add my server stats.... Model: Custom M/B: Gigabyte Technology Co., Ltd. - AB350M-DS3H-CF CPU: AMD Ryzen 3 2200G with Radeon Vega Graphics @ 3500 HVM: Disabled IOMMU: Enabled Cache: 384 kB, 2048 kB, 4096 kB Memory: 16 GB (max. installable capacity 256 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.18.10-unRAID x86_64 OpenSSL: 1.1.0i Quote Link to comment
Spaceherpe Posted November 13, 2019 Author Share Posted November 13, 2019 (edited) This still has not been resolved. Any attempt to install 6.7.2 or 6.7.1 returns failure to initiate errors and a whole mess of other line that move too fast to read. When it finially finishes, I show the login prompt, but when I check my router, there is no serever hard connected to use the ip address to bring up the GUI. I am beyond pissed. I paid for the software, I should be able to upgrade past the latest version I can use which is 6.5.1. PLEASE HELP!!! Edited November 13, 2019 by Spaceherpe Quote Link to comment
Squid Posted November 13, 2019 Share Posted November 13, 2019 At the command prompt, diagnostics It'll get saved onto the flash drive (logs folder). Post the entire zip here Quote Link to comment
Spaceherpe Posted November 14, 2019 Author Share Posted November 14, 2019 1 hour ago, Squid said: At the command prompt, diagnostics It'll get saved onto the flash drive (logs folder). Post the entire zip here I was able to upgrade to 6.7.0, but anything beyond that errors out. Right now, I am running the backup and restoring some lost file, which will take the better part of a day. Once that is done, I will run the diagnostics and post it here. Thank you for the help! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.