Jump to content
rilesnile

Problem with deconz docker and conbee

2 posts in this topic Last Reply

Recommended Posts

Hi!

 

I have been trying to move my Home Assistant setup from my pi to my Unraid server.

 

I have gotten Home Assitant and Node-RED up and running without any problems, but I have trouble with getting deConz to work.

 

To be more precise I have problem with getting the ConBee 2 usb device to show up in deConz.

The docker I am using is this one https://hub.docker.com/r/marthoc/deconz.

 

I suspect the problem is with the server recognising the ConBee.

 

In the system logs i get this error for a couple a minutes before it stops

 

Quote

Jul 11 12:37:28 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:37:28 Tower kernel: usb usb3-port5: attempt power cycle
Jul 11 12:37:28 Tower kernel: usb 3-5: new full-speed USB device number 60 using xhci_hcd
Jul 11 12:37:38 Tower kernel: usb 3-5: unable to read config index 0 descriptor/all
Jul 11 12:37:38 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:37:38 Tower kernel: usb 3-5: new full-speed USB device number 61 using xhci_hcd
Jul 11 12:37:38 Tower kernel: cdc_acm 3-5:1.0: ttyACM0: USB ACM device
Jul 11 12:37:40 Tower kernel: usb 3-5: USB disconnect, device number 61
Jul 11 12:37:41 Tower kernel: usb 3-5: new full-speed USB device number 62 using xhci_hcd
Jul 11 12:37:46 Tower kernel: usb 3-5: unable to read config index 0 descriptor/all
Jul 11 12:37:46 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:37:46 Tower kernel: usb 3-5: new full-speed USB device number 63 using xhci_hcd
Jul 11 12:37:52 Tower kernel: usb 3-5: unable to read config index 0 descriptor/all
Jul 11 12:37:52 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:37:52 Tower kernel: usb usb3-port5: attempt power cycle
Jul 11 12:37:52 Tower kernel: usb 3-5: new full-speed USB device number 64 using xhci_hcd
Jul 11 12:38:02 Tower kernel: usb 3-5: unable to read config index 0 descriptor/all
Jul 11 12:38:02 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:38:02 Tower kernel: usb 3-5: new full-speed USB device number 65 using xhci_hcd
Jul 11 12:38:02 Tower kernel: cdc_acm 3-5:1.0: ttyACM0: USB ACM device
Jul 11 12:38:04 Tower kernel: usb 3-5: USB disconnect, device number 65
Jul 11 12:38:05 Tower kernel: usb 3-5: new full-speed USB device number 66 using xhci_hcd
Jul 11 12:38:10 Tower kernel: usb 3-5: unable to read config index 0 descriptor/all
Jul 11 12:38:10 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:38:10 Tower kernel: usb 3-5: new full-speed USB device number 67 using xhci_hcd
Jul 11 12:38:16 Tower kernel: usb 3-5: unable to read config index 0 descriptor/all
Jul 11 12:38:16 Tower kernel: usb 3-5: can't read configurations, error -110
Jul 11 12:38:16 Tower kernel: usb usb3-port5: attempt power cycle
Jul 11 12:38:16 Tower kernel: usb 3-5: new full-speed USB device number 68 using xhci_hcd
Jul 11 12:38:16 Tower kernel: cdc_acm 3-5:1.0: ttyACM0: USB ACM device

 

After this the device is recognised in unraid as: Bus 003 Device 068:ID 1cf1:0030 Dresden Elektronik

 

In the log for the deconz docker I get this message repeated all the time

Quote

12:52:51:538 wait reconnect 11 seconds
12:52:52:538 wait reconnect 10 seconds
12:52:53:538 wait reconnect 9 seconds
12:52:53:538 wait reconnect 9 seconds
12:52:54:538 wait reconnect 8 seconds
12:52:55:538 wait reconnect 7 seconds
12:52:55:538 wait reconnect 7 seconds
12:52:56:538 wait reconnect 6 seconds
12:52:57:538 wait reconnect 5 seconds
12:52:57:538 wait reconnect 5 seconds
12:52:58:538 wait reconnect 4 seconds
12:52:59:538 wait reconnect 3 seconds
12:52:59:538 wait reconnect 3 seconds
12:53:00:538 wait reconnect 2 seconds
12:53:01:538 wait reconnect 1 seconds
12:53:01:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:01:538 wait reconnect 1 seconds
12:53:01:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:02:538 wait reconnect 15 seconds
12:53:02:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:03:538 wait reconnect 14 seconds
12:53:04:538 wait reconnect 13 seconds
12:53:05:538 wait reconnect 12 seconds
12:53:06:538 wait reconnect 11 seconds
12:53:07:538 wait reconnect 10 seconds
12:53:08:538 wait reconnect 9 seconds
12:53:09:538 wait reconnect 8 seconds
12:53:10:538 wait reconnect 7 seconds
12:53:11:538 wait reconnect 6 seconds
12:53:12:538 wait reconnect 5 seconds
12:53:13:538 wait reconnect 4 seconds
12:53:14:219 found gateway 192.168.1.64:80
12:53:14:219 found gateway 192.168.1.64:80
12:53:14:538 wait reconnect 3 seconds
12:53:15:538 wait reconnect 2 seconds
12:53:16:538 wait reconnect 1 seconds
12:53:16:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:17:538 wait reconnect 15 seconds
12:53:17:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:18:538 wait reconnect 14 seconds
12:53:19:538 wait reconnect 13 seconds
12:53:20:538 wait reconnect 12 seconds
12:53:21:538 wait reconnect 11 seconds
12:53:22:538 wait reconnect 10 seconds
12:53:22:538 wait reconnect 10 seconds
12:53:23:537 wait reconnect 9 seconds
12:53:23:741 scan finished
12:53:24:538 wait reconnect 8 seconds
12:53:24:538 wait reconnect 8 seconds
12:53:25:538 wait reconnect 7 seconds
12:53:26:538 wait reconnect 6 seconds
12:53:26:538 wait reconnect 6 seconds
12:53:27:538 wait reconnect 5 seconds
12:53:28:538 wait reconnect 4 seconds
12:53:28:538 wait reconnect 4 seconds
12:53:29:538 wait reconnect 3 seconds
12:53:30:538 wait reconnect 2 seconds
12:53:30:538 wait reconnect 2 seconds
12:53:31:538 wait reconnect 1 seconds
12:53:31:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:32:538 wait reconnect 15 seconds
12:53:32:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)
12:53:32:538 wait reconnect 15 seconds
12:53:32:542 COM: --dev: /dev/bus/usb/003/068 (RaspBee)

Here is a pic of the docker configuration also

lg0tcTS.png

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.