lordfiSh Posted July 14, 2019 Share Posted July 14, 2019 (edited) I have Problems with the ConBee II USB Stick (works fine on my Raspberry 3). Here are the Logs: usb 1-3: unable to read config index 0 descriptor/all usb 1-3: can't read configurations, error -110 usb 1-3: new full-speed USB device number 10 using xhci_hcd usb 1-3: unable to read config index 0 descriptor/all usb 1-3: can't read configurations, error -110 usb usb1-port3: attempt power cycle usb 1-3: new full-speed USB device number 11 using xhci_hcd cdc_acm 1-3:1.0: ttyACM0: USB ACM device usb 1-3: USB disconnect, device number 11 usb 1-3: new full-speed USB device number 12 using xhci_hcd cdc_acm 1-3:1.0: ttyACM0: USB ACM device usb 1-3: USB disconnect, device number 12 usb 1-3: new full-speed USB device number 13 using xhci_hcd cdc_acm 1-3:1.0: ttyACM0: USB ACM device usb 1-3: reset full-speed USB device number 13 using xhci_hcd Same Problem while using Docker or passing the USB Device to a VM tower-diagnostics-20190714-2115.zip Edited July 16, 2019 by lordfiSh 1 Quote Link to comment
trurl Posted July 14, 2019 Share Posted July 14, 2019 Copied from report to General Support. @lordfiSh Go to Tools - Diagnostics and attach the complete diagnostics zip file to your next post. Quote Link to comment
lordfiSh Posted July 14, 2019 Author Share Posted July 14, 2019 9 hours ago, trurl said: Copied from report to General Support. @lordfiSh Go to Tools - Diagnostics and attach the complete diagnostics zip file to your next post. fixed Quote Link to comment
rilesnile Posted July 15, 2019 Share Posted July 15, 2019 Hi, I have the exact problem with my Conbee II. It also works on my raspi and on my Windows 10 computer tower-diagnostics-20190715-1705.zi I get this message: Jul 15 19:03:55 Tower kernel: usb usb3-port9: attempt power cycle Jul 15 19:03:55 Tower kernel: usb 3-9: new full-speed USB device number 50 using xhci_hcd Jul 15 19:04:04 Tower kernel: usb 3-9: unable to read config index 0 descriptor/all Jul 15 19:04:04 Tower kernel: usb 3-9: can't read configurations, error -110 Jul 15 19:04:05 Tower kernel: usb 3-9: new full-speed USB device number 51 using xhci_hcd in the log for a couple a minutes then it stops, se my syslog here: tower-syslog-20190715-1709.zip I made a topic on this last week but didnt get any answers. Quote Link to comment
lordfiSh Posted July 16, 2019 Author Share Posted July 16, 2019 (edited) @trurl why has this been moved to the General Support? I thought this is a Kernel Problem? Edited July 16, 2019 by lordfiSh Quote Link to comment
trurl Posted July 16, 2019 Share Posted July 16, 2019 16 hours ago, lordfiSh said: @trurl why has this been moved to the General Support? I thought this is a Kernel Problem? Why do you think it's a kernel problem? Are you trying to pass that device to a VM? I'm not familiar with that device, but from the web site you linked, I wouldn't expect Unraid to support it natively. Unraid is not one of the supported platforms, according to that website. Unraid isn't a general purpose Linux installation and won't include drivers for that device. It doesn't even include wifi drivers. You might try running Ubuntu in a VM and pass that device to it. Quote Link to comment
Shlomi C Posted January 8, 2020 Share Posted January 8, 2020 Sorry to bump an old post, but I'm running into the exact same problem with the exact same device (Conbee II). I tried locking it down to /dev/ttyUSB-zigbee as suggested in related threads but it still keeps disconnecting and reconnecting every few seconds. Did anyone ever find a solution? Quote Link to comment
sir_storealot Posted October 25, 2020 Share Posted October 25, 2020 Hi, anyone found a solution to this please? My homeassistant VM hosted by Unraid is losing connection to the conbee stick constantly Seems to be an UNRAID related issue: https://community.home-assistant.io/t/conbee-ii-issues-with-unraid-since-last-firmware-update/210785 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.