[6.7] usb 1-3: can't read configurations, error -110 (ConBee II USB Stick not working)


Recommended Posts

I have Problems with the ConBee II USB Stick (works fine on my Raspberry 3). Here are the Logs: 

 

usb 1-3: unable to read config index 0 descriptor/all
usb 1-3: can't read configurations, error -110
usb 1-3: new full-speed USB device number 10 using xhci_hcd
usb 1-3: unable to read config index 0 descriptor/all
usb 1-3: can't read configurations, error -110
usb usb1-port3: attempt power cycle
usb 1-3: new full-speed USB device number 11 using xhci_hcd
cdc_acm 1-3:1.0: ttyACM0: USB ACM device
usb 1-3: USB disconnect, device number 11
usb 1-3: new full-speed USB device number 12 using xhci_hcd
cdc_acm 1-3:1.0: ttyACM0: USB ACM device
usb 1-3: USB disconnect, device number 12
usb 1-3: new full-speed USB device number 13 using xhci_hcd
cdc_acm 1-3:1.0: ttyACM0: USB ACM device
usb 1-3: reset full-speed USB device number 13 using xhci_hcd

Same Problem while using Docker or passing the USB Device to a VM

 

tower-diagnostics-20190714-2115.zip

Edited by lordfiSh
  • Like 1
Link to comment

Hi,

 

I have the exact problem with my Conbee II.

It also works on my raspi and on my Windows 10 computer

tower-diagnostics-20190715-1705.zi

I get this message:

Jul 15 19:03:55 Tower kernel: usb usb3-port9: attempt power cycle
Jul 15 19:03:55 Tower kernel: usb 3-9: new full-speed USB device number 50 using xhci_hcd
Jul 15 19:04:04 Tower kernel: usb 3-9: unable to read config index 0 descriptor/all
Jul 15 19:04:04 Tower kernel: usb 3-9: can't read configurations, error -110
Jul 15 19:04:05 Tower kernel: usb 3-9: new full-speed USB device number 51 using xhci_hcd

in the log for a couple a minutes then it stops, se my syslog here: tower-syslog-20190715-1709.zip

 

I made a topic on this last week but didnt get any answers. 

 

Link to comment
16 hours ago, lordfiSh said:

@trurl why has this been moved to the General Support? I thought this is a Kernel Problem?

Why do you think it's a kernel problem? Are you trying to pass that device to a VM?

 

I'm not familiar with that device, but from the web site you linked, I wouldn't expect Unraid to support it natively. Unraid is not one of the supported platforms, according to that website. Unraid isn't a general purpose Linux installation and won't include drivers for that device. It doesn't even include wifi drivers.

 

You might try running Ubuntu in a VM and pass that device to it.

Link to comment
  • 5 months later...

Sorry to bump an old post, but I'm running into the exact same problem with the exact same device (Conbee II).

I tried locking it down to /dev/ttyUSB-zigbee as suggested in related threads but it still keeps disconnecting and reconnecting every few seconds.

Did anyone ever find a solution?

Link to comment
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.