steve1977 Posted July 19, 2019 Author Share Posted July 19, 2019 Thanks for both of your replies. Is it possible to disable rather than uninstall the plugins? Just to make sure, you are referring to the mobo bios (not the controller FW), right? I can do so. The actual update should be easy once I have a screen attached? Controller heat seems to be the issue. It didn't work stable for many many years and I tried about everything you can imagine. The unlock was to move the controller card and keep one slot free between the controller and the GPU. It is replicable and it keeps failing when I put a card again in the now empty slot or move the card back next to the GPU. Also, it worked better if I turned off the server for a while and let the controller cool down before a parity rebuild. Quote Link to comment
steve1977 Posted July 19, 2019 Author Share Posted July 19, 2019 Just now, WizADSL said: No, but that is one of the things he'd like to attempt if he connects it to a monitor in order to do the BIOS upgrade. I would strongly discourage overclocking ANY server let alone one where heat may already be an issue WITHOUT overclocking. That's right. No OC yet. Was just playing with the though of doing so if I anyways move the server to update the bios. I used to be able to connect my server to an iMac screen via DVI. No idea why this stopped working though (maybe different mobo/GPU or maybe Unraud update), so I now need to move the server to a different room as this no longer works. Quote Link to comment
KC Posted July 19, 2019 Share Posted July 19, 2019 Woah ... ok kindergarten #1 of running servers. Overclock and die. I'm just gonna bail on this thread - it has no obvious positive solution. Quote Link to comment
steve1977 Posted July 20, 2019 Author Share Posted July 20, 2019 Ok, let me not pursue the OC then. Will try two things if/once the parity rebuild is complete. Will check whether the other card(s) is IT mode. Will update the bios. Will report back. Quote Link to comment
steve1977 Posted July 31, 2019 Author Share Posted July 31, 2019 On 7/19/2019 at 10:20 PM, johnnie.black said: It would use the HBA driver instead of the RAID driver, if nothing else it's the most tested and used, also possibly a little better performance. I finally switched the controller card to another one that I still have. Any thoughts based on attached diagnostic whether this is now a better driver / FW for my controller card to what I had before? tower-diagnostics-20190731-1043.zip Quote Link to comment
Vr2Io Posted July 31, 2019 Share Posted July 31, 2019 It is IT/IR ( not megaraid ) mode now. Quote Link to comment
steve1977 Posted July 31, 2019 Author Share Posted July 31, 2019 Is this better and recommended for Unraid? Is it IT or IR? Better than my other controller, which was megaraid? One weird thing though is that I can start with this "old" controller, but only if not attaching any of the harddisks. If I attach the harddisks, Unraid does not boot up. I am running Unraid headless, so have no idea what the error message is. Quote Link to comment
Vr2Io Posted July 31, 2019 Share Posted July 31, 2019 (edited) 1 hour ago, steve1977 said: Is this better and recommended for Unraid? Is it IT or IR? Better than my other controller, which was megaraid? One weird thing though is that I can start with this "old" controller, but only if not attaching any of the harddisks. If I attach the harddisks, Unraid does not boot up. I am running Unraid headless, so have no idea what the error message is. Sure it is recommand for Unraid, but firrmware still bit old Jul 31 18:42:31 Tower kernel: mpt2sas_cm0: LSISAS2008: FWVersion(19.00.00.00), ChipRevision(0x03), BiosVersion(07.37.00.00) Suggest you try first to see improvement or not. If you have time, you should try flash a megaraid adapter to IT adapter. Edited July 31, 2019 by Benson Quote Link to comment
JorgeB Posted July 31, 2019 Share Posted July 31, 2019 It's in IT mode, firmware isn't the latest but it will work fine, though updating is easy. Quote Link to comment
steve1977 Posted July 31, 2019 Author Share Posted July 31, 2019 Is the "old" FW an issue? I remember I tried to do the update before and it was a HUGE pain in the neck. I tried days and ended up getting error messages. From my memory, it was only possible when booting with some special USB bootdrive and then still had issues with my setup. Is there an easier way to do so directly from Unraid? Also, any idea why Unraid doesn't boot if I connect the harddisks to this "old" controller? "New" contrller (megaraid) with harddisks - boots up "Old" controller (IT) with harddisks - does not boot "Old" controllre (IT) without harddisks - boots up Issue is replicable. Same slot is used. Quote Link to comment
Vr2Io Posted July 31, 2019 Share Posted July 31, 2019 (edited) 56 minutes ago, steve1977 said: "New" contrller (megaraid) with harddisks - boots up "Old" controller (IT) with harddisks - does not boot "Old" controllre (IT) without harddisks - boots up If mainboard BIOS boot pointing to correct device ( Unraid USB ), this should't happen, pls check that. Or you may try setting boot disable on HBA by access controller's firmware menu. What actual means of "does not boot" ? best have some screen shoot. Example Edited July 31, 2019 by Benson Quote Link to comment
steve1977 Posted August 1, 2019 Author Share Posted August 1, 2019 Tried everything, but cannot get the "old" card to work and don't have a screen to attach to it. I'll buy a new controller card and ask the vendor to flash it for me. What exactly should I request? IT mode? What FW version? Quote Link to comment
JorgeB Posted August 1, 2019 Share Posted August 1, 2019 IT mode, latest firmware is p20.00.07.00 Quote Link to comment
steve1977 Posted August 1, 2019 Author Share Posted August 1, 2019 Ok. Just ordered a new controller card with above FW. Fingers crossed! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.