July 23, 20196 yr HELP!! I had a disk go bad on my server (disk 5 marked with an X and contents emulated). I was running dual parity and for some reason (read BRAIN F**T) I stopped the array, replaced the bad diskl with the Parity 2 disk and started the array again thinking I will go back to single parity and have the disk 5 rebuilt. BUT after restarting the array it hasn't started rebuilding the disk and still shows disk 5 as X with contents emulated. Attaching the server logs here. Any help appreciated! Thanks! mediatower-diagnostics-20190723-1928.zip
July 24, 20196 yr Community Expert Log is full of noise and very difficult to analyze, please reboot and post new diags.
July 24, 20196 yr Author server rebooted and new diags attached mediatower-diagnostics-20190724-1828.zip
July 25, 20196 yr Community Expert Start rebuilding disk5, current disk5 looks fine but there are a lot of CRC errors, this is usually a bad cable, though they could be old errors.
July 25, 20196 yr Author Should I just start a new parity check with write corrections to disk? I don't see any option to rebuild data on a disk and disk 5 still shows with a red X instead of a blue dot.
July 25, 20196 yr Community Expert You can't do a parity check with single parity and a disabled disk, re-enable the disk.
Archived
This topic is now archived and is closed to further replies.