device disabled contents emulated - Disk cant be mounted after reboot of server? - General Support

July 25, 20196 yr

X-post from reddit

Can someone help me here?

Getting this disk information from unraid SMART log:

"smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.41-Unraid] (local build)

Short INQUIRY response, skip product id

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options."

also got this from unassigned devices

ErrorWarningSystemArray

Jul 25 10:08:13 Cyberdyne kernel: ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 43

Jul 25 10:08:13 Cyberdyne kernel: ata5: softreset failed (1st FIS failed)

Jul 25 10:08:13 Cyberdyne kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

Jul 25 10:08:13 Cyberdyne kernel: ata5.00: READ LOG DMA EXT failed, trying PIO

Jul 25 10:08:13 Cyberdyne kernel: ata5.00: NCQ Send/Recv Log not supported

Jul 25 10:08:13 Cyberdyne kernel: ata5.00: ATA-10: ST8000VN0022-2EL112, ZA1E12RG, SC61, max UDMA/133

Jul 25 10:08:13 Cyberdyne kernel: ata5.00: 0 sectors, multi 0: LBA NCQ (depth 32), AA

Jul 25 10:08:13 Cyberdyne kernel: ata5.00: NCQ Send/Recv Log not supported

Jul 25 10:08:13 Cyberdyne kernel: ata5.00: configured for UDMA/133

Jul 25 10:08:13 Cyberdyne kernel: sd 5:0:0:0: [sdf] 0 512-byte logical blocks: (0 B/0 B)

Jul 25 10:08:13 Cyberdyne kernel: sd 5:0:0:0: [sdf] 4096-byte physical blocks

Jul 25 10:08:13 Cyberdyne kernel: sd 5:0:0:0: [sdf] Write Protect is off

Jul 25 10:08:13 Cyberdyne kernel: sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00

Jul 25 10:08:13 Cyberdyne kernel: sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Jul 25 10:08:13 Cyberdyne kernel: sd 5:0:0:0: [sdf] Attached SCSI disk

Jul 25 10:08:28 Cyberdyne emhttpd: device /dev/sdf has size zero

What should i do from here? It is a Ironwolf 8tb harddrive.

Harddrive is less than a year old and was precleared before building the array.

After reseating harddrives by request from a redditor, i can now see potential capacity of the drive, however, i still cant mount. When i attempt, it just flashes and i can no longer select the drive. Getting the following message from Unassigned:

Jul 25 11:22:46 Cyberdyne kernel: ata7: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580400 irq 43
Jul 25 11:22:46 Cyberdyne kernel: ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: failed to read native max address (err_mask=0x1)
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: HPA support seems broken, skipping HPA handling
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: ATA-8: ST8000VN0022, ZA1E12RG, SC61, max UDMA/133
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32)
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: configured for UDMA/133 (device error ignored)
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] Write Protect is off
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: READ LOG DMA EXT failed, trying PIO
Jul 25 11:22:46 Cyberdyne kernel: ata7: failed to read log page 10h (errno=-5)
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: exception Emask 0x1 SAct 0x20000000 SErr 0x0 action 0x0
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: irq_stat 0x40000001
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: configured for UDMA/133 (device error ignored)
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#29 Sense Key : 0x5 [current]
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#29 ASC=0x24 ASCQ=0x0
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#29 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Jul 25 11:22:46 Cyberdyne kernel: print_req_error: critical target error, dev sdg, sector 0
Jul 25 11:22:46 Cyberdyne kernel: Buffer I/O error on dev sdg, logical block 0, async page read
Jul 25 11:22:46 Cyberdyne kernel: ata7: EH complete
Jul 25 11:22:46 Cyberdyne kernel: ata7: failed to read log page 10h (errno=-5)
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: NCQ disabled due to excessive errors
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: exception Emask 0x1 SAct 0x8 SErr 0x0 action 0x0
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: irq_stat 0x40000001
Jul 25 11:22:46 Cyberdyne kernel: ata7.00: configured for UDMA/133 (device error ignored)
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#3 Sense Key : 0x5 [current]
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#3 ASC=0x24 ASCQ=0x0
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#3 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Jul 25 11:22:46 Cyberdyne kernel: print_req_error: critical target error, dev sdg, sector 0
Jul 25 11:22:46 Cyberdyne kernel: Buffer I/O error on dev sdg, logical block 0, async page read
Jul 25 11:22:46 Cyberdyne kernel: ata7: EH complete
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 Sense Key : 0x2 [current]
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 ASC=0x4 ASCQ=0x22
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
Jul 25 11:22:46 Cyberdyne kernel: print_req_error: I/O error, dev sdg, sector 0
Jul 25 11:22:46 Cyberdyne kernel: Buffer I/O error on dev sdg, logical block 0, async page read
Jul 25 11:22:46 Cyberdyne kernel: sdg: unable to read partition table
Jul 25 11:22:46 Cyberdyne kernel: sdg: detected capacity change from 0 to 8001563222016
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] Attached SCSI disk
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 Sense Key : 0x2 [current]
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 ASC=0x4 ASCQ=0x22
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#20 CDB: opcode=0x88 88 00 00 00 00 03 a3 81 2a 00 00 00 00 08 00 00
Jul 25 11:22:46 Cyberdyne kernel: print_req_error: I/O error, dev sdg, sector 15628052992
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#21 Sense Key : 0x2 [current]
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#21 ASC=0x4 ASCQ=0x22
Jul 25 11:22:46 Cyberdyne kernel: sd 7:0:0:0: [sdg] tag#21 CDB: opcode=0x88 88 00 00 00 00 03 a3 81 2a 00 00 00 00 08 00 00

Any help would be greatly appreciated, i'm unfortunately still quite new to this.

Edited July 25, 20196 yr by sirrasmusdk

Quote

July 25, 20196 yr

Looks like bad / loose cabling, but the full diagnostics would be a better gauge of what's going on

Quote

device disabled contents emulated - Disk cant be mounted after reboot of server?

Featured Replies

Archived

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)