jaminben Posted August 1, 2019 Share Posted August 1, 2019 Hi, I updated to version 6.7.2 from 6.* (I can't remember the version but I'm a new user so it wasn't all that old) and since doing so I can't access the 'Apps Store'. I used to have another network card attached to my device and I think it's got something to do with the default gateway being set to the old device. I've tried deleting the settings from the GUI but it doesn't want to go. I attached a couple of screenshots which probably explains a lot more than I can by typing. Anyone with any ideas? Thanks Ben Quote Link to comment
bastl Posted August 1, 2019 Share Posted August 1, 2019 You have 2 default routes. There should be only one defined. Quote Link to comment
jaminben Posted August 1, 2019 Author Share Posted August 1, 2019 12 minutes ago, bastl said: You have 2 default routes. There should be only one defined. Yep, but how do I delete the 192.168.2.1 route?... using the delete icon doesn't do anything. Quote Link to comment
bastl Posted August 1, 2019 Share Posted August 1, 2019 It is used by the bridge br1. If you don't use it by any docker or VM remove it and you should be able to remove the 192.168.2.1 route or it is removed by removing the bridge. Can't test it right now. You can also find the network config in the config folder on your Unraid flash drive in one of the text files. Make sure you are removing the right bridge. Quote Link to comment
jaminben Posted August 1, 2019 Author Share Posted August 1, 2019 Ok, I don't use br1 but I also can't remember how I created it or where to delete it... can it be delete it via the GUI? Quote Link to comment
jaminben Posted August 1, 2019 Author Share Posted August 1, 2019 I found the file with the following entries: Quote # Generated settings: IFNAME[0]="br0" BRNAME[0]="br0" BRSTP[0]="no" BRFD[0]="0" BRNICS[0]="eth0" PROTOCOL[0]="ipv4" USE_DHCP[0]="no" IPADDR[0]="192.168.1.2" NETMASK[0]="255.255.255.0" GATEWAY[0]="192.168.1.1" METRIC[0]="1" DNS_SERVER1="8.8.8.8" DNS_SERVER2="8.8.4.4" USE_DHCP6[0]="yes" DHCP6_KEEPRESOLV="no" IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" PROTOCOL[1]="ipv4" USE_DHCP[1]="no" IPADDR[1]="192.168.2.2" NETMASK[1]="255.255.255.0" GATEWAY[1]="192.168.2.1" SYSNICS="2" Do I just remove all the [2]? Can I just do this via Krusader… copy it out to a share > edit it > move it back? Quote Link to comment
bastl Posted August 1, 2019 Share Posted August 1, 2019 Click the trashcan should do the trick. At least it did for me as I had that issue upgrading to 6.7.2. This is the corresponding line: 192.168.2.0/24 br1 1 Quote Link to comment
jaminben Posted August 1, 2019 Author Share Posted August 1, 2019 Just now, bastl said: Click the trashcan should do the trick. At least it did for me as I had that issue upgrading to 6.7.2. This is the corresponding line: 192.168.2.0/24 br1 1 Trashcan doesn't work for me. Quote Link to comment
bastl Posted August 1, 2019 Share Posted August 1, 2019 Remove the following part in the textfile. I think you have to restart Unraid to take this changes in place. IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" PROTOCOL[1]="ipv4" USE_DHCP[1]="no" IPADDR[1]="192.168.2.2" NETMASK[1]="255.255.255.0" GATEWAY[1]="192.168.2.1" 1 Quote Link to comment
jaminben Posted August 1, 2019 Author Share Posted August 1, 2019 4 minutes ago, bastl said: Remove the following part in the textfile. I think you have to restart Unraid to take this changes in place. IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" PROTOCOL[1]="ipv4" USE_DHCP[1]="no" IPADDR[1]="192.168.2.2" NETMASK[1]="255.255.255.0" GATEWAY[1]="192.168.2.1" That's sorted it out Thankyou. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.