Jump to content
Sign in to follow this  
Ernie11

VM breaks Disk1

1 post in this topic Last Reply

Recommended Posts

Hello Everyone,

 

Im having an issue with getting a vm to run with the onboard graphics. I create the VM using VNC and then install nomachine. But when I turn it off and start it selecting my onboard graphics I get an error on my disk1 which is where the VM resides. I have to rebuild my disk1 because of this. I though the first time was something wrong I did from all the testing but it has happened again. Am I doing something wrong? Can I passthough my onboard graphics to a VM? Thanks

 

M/B: ASRock B450 Pro4

BIOS: American Megatrends Inc. Version P3.10. Dated: 03/07/2019

CPU: AMD Ryzen 3 2200G with Radeon Vega Graphics @ 3500 MHz

HVM: Enabled

IOMMU: Enabled

Memory: 16 GiB DDR4

Kernel: Linux 4.19.56-Unraid x86_64

 

-realtime mlock=off \
-smp 3,sockets=1,cores=3,threads=1 \
-uuid (took this out) \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=27,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc,driftfix=slew \
-global kvm-pit.lost_tick_policy=delay \
-no-hpet \
-no-shutdown \
-boot strict=on \
-device pcie-root-port,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x2 \
-device pcie-root-port,port=0x11,chassis=2,id=pci.2,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=0x12,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=0x13,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \
-device pcie-root-port,port=0x14,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \
-drive file=/mnt/user/domains/Linux/vdisk1.img,format=raw,if=none,id=drive-virtio-disk2,cache=writeback \
-device virtio-blk-pci,scsi=off,bus=pci.3,addr=0x0,drive=drive-virtio-disk2,id=virtio-disk2,bootindex=1,write-cache=on \
-netdev tap,fd=29,id=hostnet0,vhost=on,vhostfd=30 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=(took this out),bus=pci.1,addr=0x0 \
-chardev pty,id=charserial0 \
-device isa-serial,chardev=charserial0,id=serial0 \
-chardev socket,id=charchannel0,fd=31,server,nowait \
-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \
-device usb-tablet,id=input0,bus=usb.0,port=1 \
-device vfio-pci,host=38:00.0,id=hostdev0,x-vga=on,bus=pci.4,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2019-08-06 02:19:37.194+0000: Domain id=5 is tainted: high-privileges
2019-08-06 02:19:37.194+0000: Domain id=5 is tainted: host-cpu
char device redirected to /dev/pts/0 (label charserial0)
2019-08-06T02:24:19.031357Z qemu-system-x86_64: terminating on signal 15 from pid 8607 (/usr/sbin/libvirtd)
2019-08-06 02:24:19.831+0000: shutting down, reason=destroyed

 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this