Unassigned Devices ( Vanishing Drives )


Recommended Posts

I'm not sure if this has to do with the latest UPDATE but here's the issue.

 

When hot swapping a drive in the past; the drive would immediately show up as an Unassigned_Devices and now, they don't!

 

I've tried the following:

 

Plugged drives into all the available bays, nothing.

Deleted Unassigned_Devices and Reinstalled, nothing.

 

The only thing that works is to [ REBOOT ] the server.

 

As you can see a before and after screenshot. Before, the reboot, NO DRIVE, after the REBOOT the drive miraculously appears ready to be MOUNTED.

 

Any help would be greatly appreciated! 

UNRAID-Unassigned-Problem.JPG

 

UNRAID-Unassigned-Problem-After-reboot2.JPG

Edited by JCristina
Uploaded wrong AFTER screenshot.
Link to comment

Thanks testdasi! Worked! Screencaps attached.

 

1. 4th drive installed and does not show up

2. 4th drive installed and rescan-scsi-bus was executed.

3. 4th now shows up as an Unassigned_Device

 

Question for everyone... This was not a "THING" prior to the update. Is this a bug that needs to be worked out or are we just going to have to re-scan the drive each time we hotswap a drive?

 

Thanks all!

 

UNRAID-Unassigned-Problem-Added-4th-Drive.JPG

UNRAID-Unassigned-Problem-Added-4th-Drive-ran-rescan-scsi-bus.JPG

UNRAID-Unassigned-Problem-Added-4th-Drive-ran-rescan-scsi-bus-after.JPG

Link to comment
17 hours ago, dlandon said:

Try clicking the double arrows next to the complete switch at the top of the UD page.  This should rescan for devices.

 

Do you have hot swap enabled in the bios?

Nope! The rescan button does not work. Still the command line or reboot is the only remedy. 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.