Jump to content
Sign in to follow this  
T3nchu

Rebuild keep failing (Solved)

4 posts in this topic Last Reply

Recommended Posts

Posted (edited)

I have 4.7 UNRAID with RAID bus controller: Marvell Technology Group Ltd. MV64460/64461/64462 System Controller, Revision B (rev 01). I know there are issue with this card type. I keep getting a fail drive randomly. Initially, I would rebuild the drive and sometimes it would be months before it fail again. Recently, I can't seems to rebuild the drive anymore. It would initiate rebuild then fail. The drive I put is precleared. How do I go about and save my system? I purchased a LSI 9207-8i card, but the system is not recognizing it (according to the company I purchase the card from, it is in IT mode). Any help would be greatly appreciated.

 

SATA controller.jpg

syslog-2019-08-11.txt

Edited by T3nchu

Share this post


Link to post

I currently have a fail drive but the config is valid. Is that ok for my to update to V6 and rebuild the drive?

Share this post


Link to post

Think I got it figured out. I replaced the PCI cards. Upgrade to 6.7.2. Reassignment my drives and check parity correct. It started a parity check and flag the error drive. After replacing the drive restart the server, it started to rebuild my replaced drive. Once this is done, i will work on my other V5 UNRAID server with new parts.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this