(Solved) Replaced 2 HP H220 controller with LSI9300-16i, most disks show missing.


Harro

Recommended Posts

Just as the title states I replaced the HP controller with the lsi 16i and most disks are now missing.I do have a snap shot of my assignments before the replace. All disks are shown in the unassigned devices. My parity disks are ok and mounted.

Should I mount all the disks and then unassign my parity drives, start array , stop array and then mount my parity disks back in and let parity rebuild. Or is there a better way?

lsi1.jpg

lsi2.jpg

Edited by Harro
Solved
Link to comment
14 minutes ago, johnnie.black said:

Try toggling Settings -> Display settings -> Display world-wide-name in device ID:

 

You should also update the HBA firmware, it's very old.

Toggled settings with no affects.

I would guess I should flash the 9300 with the 9305 firmware. Correct. I haven't found any updates to the 9300.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.