grog189 Posted August 22, 2019 Share Posted August 22, 2019 Good Evening everyone I was hoping to get some assistance as I am completely confused even though I have tried to read everything I can find to help me figure it out. I am looking at these two servers being sold by metservers for my Unraid 24 bay 4 u rackmount build. https://www.metservers.com/Supermicro-SuperServer-6047R-E1R24N-24-Bay-LFF-4U-Rackmount-Server and https://www.metservers.com/Supermicro-CSE-846-CSE-846-24-Bay-LFF-4U-Rackmount-Server Far as I can tell the cases and backplane are the same with the only major difference is one has the motherboard X9DRi-F and the other has X9DRi-LN4F+, along with one having 1200W gold power supply while the other has 920W platinum. This is where I am confused, the one that comes with the X9DRi-F also comes with the LSI 9210-8i IT mode controller, while the X9DRi-LN4F+ does not come with one. Will I be able to use the X9DRi-LN4F+ with the on board controller to manage the backplane instead of requiring the LSI 9210-8i IT mode controller? Or will I have to buy a controller? I've tried to read through the Supermicro documentation but I just do not know enough about server hardware to make a definitive decision. Also emailed metservers but they have not responded as of yet. *Thank you for taking the time to assist me!* Quote Link to comment
Jackal24 Posted August 26, 2019 Share Posted August 26, 2019 On 8/22/2019 at 6:06 PM, grog189 said: Good Evening everyone I was hoping to get some assistance as I am completely confused even though I have tried to read everything I can find to help me figure it out. I am looking at these two servers being sold by metservers for my Unraid 24 bay 4 u rackmount build. https://www.metservers.com/Supermicro-SuperServer-6047R-E1R24N-24-Bay-LFF-4U-Rackmount-Server and https://www.metservers.com/Supermicro-CSE-846-CSE-846-24-Bay-LFF-4U-Rackmount-Server Far as I can tell the cases and backplane are the same with the only major difference is one has the motherboard X9DRi-F and the other has X9DRi-LN4F+, along with one having 1200W gold power supply while the other has 920W platinum. This is where I am confused, the one that comes with the X9DRi-F also comes with the LSI 9210-8i IT mode controller, while the X9DRi-LN4F+ does not come with one. Will I be able to use the X9DRi-LN4F+ with the on board controller to manage the backplane instead of requiring the LSI 9210-8i IT mode controller? Or will I have to buy a controller? I've tried to read through the Supermicro documentation but I just do not know enough about server hardware to make a definitive decision. Also emailed metservers but they have not responded as of yet. *Thank you for taking the time to assist me!* You could use a reverse breakout cable and the motherboard sata ports, or you could buy an hba. They are pretty cheap. From what I have read, the 920w power supplies are much, much quieter than the 1200w ones, Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.