August 25, 20196 yr For a while now I've had most of the SMART Self-Test buttons for each disk drive greyed out. "Download" is available (and works), but the four buttons under it are not. The lower button has the message about the disk needing to be spun up. The problem is, that even if the disk is indeed spun up, I get the same behavior. Theres's an older thread about this here, but it's in a deprecated section so I thought I'd raise it here. Problem might be related to hdparm providing inaccurate status for spun-up drives, like so: > smartctl -x /dev/sdh | grep "^Device State:" | sed "s/^.*: *// ; s/ *(.*//" Active whereas > hdparm -C /dev/sdh /dev/sdh: drive state is: standby Any help would be appreciated. Unraid 6.7.2. Drives support SMART with no issue.
August 25, 20196 yr Are these all regular SATA disks and connected to SATA ports on the motherboard or different set up?
August 25, 20196 yr Author 9 minutes ago, bonienl said: Are these all regular SATA disks and connected to SATA ports on the motherboard or different set up? SATA 4TB drives. Connected to SAS/SATA ports of an X10SL7-F.
August 25, 20196 yr Can you make an entry under Bug Reports -> Stable Releases (mention 6.7.2) And include your diagnostics file. This way it will stay visible as a point of attention. Thx
Archived
This topic is now archived and is closed to further replies.