Jump to content
DanielCoffey

Changed router and now cannot access Array GUI?

6 posts in this topic Last Reply

Recommended Posts

Hello folks - I need some help getting back into the web GUI of my array after a router change.

 

I used to have the typical FTTC Modem to wireless router running IPv6 and DHCP to a static address (192.168.1.202) to my unraid box. Accessing the web GUI via http://192.168.1.202 was fine.

 

I have just changed to a 4G modem/router running IPv4 (at the moment) and of course the DHCP server is not set up to issue static addresses yet. I quickly found the dynamic address the server had been assigned and accessed it via http://192.168.1.127 (this time) but immediately ran into a problem.

 

My Windows 10 desktop browser changed the 192.168.1.127 into the "long" address that the box seemed to be using.

 

It gave the Server Not Found error : We can’t connect to the server at 47451451017659140b69fc701f291711f8f06834.unraid.net.

 

What do I need to change or reset in order to gain access to the web GUI again please? I do have a monitor on the server and I do have PuTTY.

Share this post


Link to post
5 hours ago, johnnie.black said:

Edit config/ident.cfg on the flash drive and change USE_SSL from "yes" to "no", then reboot.

Perhaps that should happen automatically if the address obtained from dhcp doesn't match the address returned when the *.unraid.net is resolved.

 

In my opinion this mismatch should be handled in some way by unraid.

Share this post


Link to post
3 minutes ago, jonathanm said:

Perhaps that should happen automatically if the address obtained from dhcp doesn't match the address returned when the *.unraid.net is resolved.

 

In my opinion this mismatch should be handled in some way by unraid.

@bonienl

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.