lobo23 Posted August 27, 2019 Share Posted August 27, 2019 I'm using unRAID 6.7.2 and just added a brand new 10 TB drive (shucked WDC WD100EMAZ) to my array. It's the only drive connected using a Dell H310 card and I've gotten read errors on the disk the day after installing. I've rebuilt it once and after starting the array the read errors came back, immediately turning the drive yellow again. It's passed the short/extended self-tests, completed the xfs_repair twice, and I'm not seeing any red flags with raw read error rates/reallocated sectors/pending sectors. Attached is the diagnostics, do I just have a bad drive? Quote Link to comment
lobo23 Posted August 27, 2019 Author Share Posted August 27, 2019 unraid-diagnostics-20190827-1532.zip Quote Link to comment
JorgeB Posted August 27, 2019 Share Posted August 27, 2019 Disk looks fine, try swapping it around with another disk on the onboard controller. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.