September 12, 20196 yr Any suggestions are welcome I am running 13 drives in a das to an hp proliant server with an lsi card over 3 mini sas connections. While trying to build a new case i broke the sata connection (plastic part) off a drive. To test i pulled the pcb off another drive to see if it would allow it to connect - it didn't work. When i returned the pcb to the original drive - it also failed. As i was in the middle of transfering my windows array to unraid (and hadn't yet spun up a parity drive ) i am looking for any help in troubleshooting the issue - trying to see if the drive is getting any sort of error when the computer boots or it just doesn't detect at all. As the drives are xfs my windows and mac computers are of limited use in troubleshooting. Thanks for your help. Edit: mainly concerned about the donor drive - i need to find a different pcb for the broken drive - The drive spins up and seems to be seeking but is not detected by unraid in the ui Edited September 12, 20196 yr by mcrommert
September 12, 20196 yr Author If it helps the drives in question are an older wd red 8tb efax and a white 8tb both from shucking wd enclosures
September 13, 20196 yr 10 hours ago, mcrommert said: The drive spins up and seems to be seeking but is not detected by unraid in the ui Is it detected in the BIOS of the computer or in the BIOS of the LSI? If not, then no chance unRaid will see it. Maybe the simple answer is correct. You blew up the PCB somehow. AFAIK, when swapping PCBs between drives the drive models have to match perfectly.
September 13, 20196 yr 19 minutes ago, Squid said: AFAIK, when swapping PCBs between drives the drive models have to match perfectly. Not just match, many models require swapping a chip from the old board. https://www.donordrives.com/pcb-replacement-guide
September 14, 20196 yr Author Thank you for the answers - as a follow up was able to get the broken 8tb white to connect with a vertical usb drive bay - now building parity at about 30 MB/s (yikes) - the second drive that i unwisely operated on is dead as a doornail - this is why you don't make major decisions at 1 am Thank you for the help - hopefully i learned my lesson
September 14, 20196 yr 1 hour ago, mcrommert said: this is why you don't make major decisions at 1 am It's the best time to do that. Keeps life interesting. Imagine how bored life would be if everything always went your way.
September 15, 20196 yr Author Most of the data is unimportant but i have backups of everything So its just money
Archived
This topic is now archived and is closed to further replies.