September 15, 20196 yr Hello! I have an unraid pro install with a single 1TB SSD cache and 16 platter hard drives for data. I bought 2 M.2 drives with the intention of replacing the single SSD. I plan was to mirror the SSD to an M.2 drive, remove the SSD, then remirror to the other M.2. I installed both M.2 drives, now the server doesn't fully come up. I attached a monitor to see where it gets stuck and have attached a picture. The system pings, and I can SSH in and see both nvme drives, but the unraid web interface never becomes available and none of the dockers/vms start. Obviously without the web gui, I can't attached diagnostic files.
September 15, 20196 yr Author Nevermind! I just needed to be patient. It finished botting, but took a REALLY long time!
September 15, 20196 yr Community Expert You can get diagnostics without using the GUI. If you can ssh in then you can type the ‘diagnostics’ command and the results get written to the ‘logs’ folder on the flash drive.
Archived
This topic is now archived and is closed to further replies.