timekiller Posted September 15, 2019 Share Posted September 15, 2019 Hello! I have an unraid pro install with a single 1TB SSD cache and 16 platter hard drives for data. I bought 2 M.2 drives with the intention of replacing the single SSD. I plan was to mirror the SSD to an M.2 drive, remove the SSD, then remirror to the other M.2. I installed both M.2 drives, now the server doesn't fully come up. I attached a monitor to see where it gets stuck and have attached a picture. The system pings, and I can SSH in and see both nvme drives, but the unraid web interface never becomes available and none of the dockers/vms start. Obviously without the web gui, I can't attached diagnostic files. Quote Link to comment
timekiller Posted September 15, 2019 Author Share Posted September 15, 2019 Nevermind! I just needed to be patient. It finished botting, but took a REALLY long time! Quote Link to comment
itimpi Posted September 15, 2019 Share Posted September 15, 2019 You can get diagnostics without using the GUI. If you can ssh in then you can type the ‘diagnostics’ command and the results get written to the ‘logs’ folder on the flash drive. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.