be4con Posted September 19, 2019 Share Posted September 19, 2019 Starting around 15 hours ago my server log has been filled with these type of entries: Sep 18 22:45:45 Tower kernel: usb 2-1.3: USB disconnect, device number 117 Sep 18 22:45:45 Tower kernel: usb 2-1.3: new high-speed USB device number 118 using ehci-pci Sep 18 22:45:45 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:45:45 Tower kernel: hub 2-1.3:1.0: 2 ports detected Sep 18 22:47:07 Tower kernel: usb 2-1.3: USB disconnect, device number 118 Sep 18 22:47:07 Tower kernel: usb 2-1.3: new high-speed USB device number 119 using ehci-pci Sep 18 22:47:08 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:47:08 Tower kernel: hub 2-1.3:1.0: 2 ports detected Sep 18 22:48:07 Tower kernel: usb 2-1.3: USB disconnect, device number 119 Sep 18 22:48:08 Tower kernel: usb 2-1.3: new high-speed USB device number 120 using ehci-pci Sep 18 22:48:08 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:48:08 Tower kernel: hub 2-1.3:1.0: 2 ports detected Sep 18 22:49:03 Tower kernel: usb 2-1.3: USB disconnect, device number 120 Sep 18 22:49:03 Tower kernel: usb 2-1.3: new high-speed USB device number 121 using ehci-pci Sep 18 22:49:03 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:49:03 Tower kernel: hub 2-1.3:1.0: 2 ports detected Sep 18 22:50:25 Tower kernel: usb 2-1.3: USB disconnect, device number 121 Sep 18 22:50:25 Tower kernel: usb 2-1.3: new high-speed USB device number 122 using ehci-pci Sep 18 22:50:25 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:50:25 Tower kernel: hub 2-1.3:1.0: 2 ports detected Sep 18 22:51:16 Tower kernel: usb 2-1.3: USB disconnect, device number 122 Sep 18 22:51:16 Tower kernel: usb 2-1.3: new high-speed USB device number 123 using ehci-pci Sep 18 22:51:16 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:51:16 Tower kernel: hub 2-1.3:1.0: 2 ports detected Sep 18 22:52:06 Tower kernel: usb 2-1.3: USB disconnect, device number 123 Sep 18 22:52:07 Tower kernel: usb 2-1.3: new high-speed USB device number 124 using ehci-pci Sep 18 22:52:07 Tower kernel: hub 2-1.3:1.0: USB hub found Sep 18 22:52:07 Tower kernel: hub 2-1.3:1.0: 2 ports detected Over the same time period the fan on my server (HP Proliant Gen 8 Microserver) has been ramping up every few minutes, where it then runs at full speed for between 30 and 90s before dropping back to normal levels. The only USB device I have connected to the server is the USB stick running unraid. As far as I can tell everything seems to be running fine, temps are OK, disk access seems normal, there hasn't been undue CPU load. This started spontaneously at about 8am. tower-syslog-20190919-0008.zip I've rebooted and after starting the array the problem persists. Syslog after reboottower-syslog-20190919-0008.ziptower-syslog-20190919-0008.zip is attached to this post. Any idea what might be causing this and how I can resolve it? Thanks Quote Link to comment
be4con Posted September 21, 2019 Author Share Posted September 21, 2019 I'm still suffering this issue. I tried an OS downgrade then upgrade to see if it resolved it but no joy. Can anyone help? Thanks Quote Link to comment
Squid Posted September 21, 2019 Share Posted September 21, 2019 You need to post the diagnosticsSent from my NSA monitored device Quote Link to comment
be4con Posted September 24, 2019 Author Share Posted September 24, 2019 OK, thanks Squid. Diagnostics attached. tower-diagnostics-20190924-0958.zip Quote Link to comment
be4con Posted September 26, 2019 Author Share Posted September 26, 2019 Can anyone help at all? Thanks Quote Link to comment
NewDisplayName Posted September 26, 2019 Share Posted September 26, 2019 is it usb 3? They recommend USB 2. Quote Link to comment
be4con Posted September 26, 2019 Author Share Posted September 26, 2019 (edited) No, it's USB 2. I don't think the issue is with the unraid USB stick anyway as the OS functions apparently normally throughout. Edited September 26, 2019 by be4con Quote Link to comment
Squid Posted September 26, 2019 Share Posted September 26, 2019 First thing I'd do is remove your add on USB controller card (Hard to tell exactly if it's integrated on the mobo or not) and see if the problem goes away. Quote Link to comment
Arbadacarba Posted September 27, 2019 Share Posted September 27, 2019 I had a very similar issue with a vantec usb card when I first installed Unraid. I think it was this one: https://www.vantecusa.com/products_detail.php?p_id=194&p_name=Dual+Chip+4-Port+Dedicated+10Gbps+USB+3.1+Gen+2+PCIe+Host+Card&pc_id=16&pc_name=USB&pt_id=4&pt_name=Add-on+Cards Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.