[Support] ich777 - Application Dockers

[s0m128k]

Is increasing the resolution in DirSyncPro possible?

Menus are going off the edges of the screen for me.

 

Edited February 18, 2022 by s0m128k
added screenshot

[ich777]

18 minutes ago, s0m128k said:

Is increasing the resolution in DirSyncPro possible?

Sure thing, create a variable with the Key: CUSTOM_RES_W and the Value: 1280 to set the width and a second variable with the Key: CUSTOM_RES_H and the Value: 768 if you want to set the height in the Docker template.

 

But keep in mind this should be the only menu that is slightly "bigger" than the pre set screen size of 1024x768 and you should be able to reach all buttons and drop downs.

[Pstark]

photoprism keeps freezing on upload. I set it up yesterday and I can upload limited small amounts of photos. ie. 200-500photos. In total I have aprox 10,000 photos I want to backup but if I select all to upload, it will freeze at some point. It's not consistently stopping on the same number. 

 

I have a mysql data base to try to remedy the issue but that made no change. 

[ich777]

3 hours ago, Pstark said:

photoprism keeps freezing on upload. I set it up yesterday and I can upload limited small amounts of photos. ie. 200-500photos. In total I have aprox 10,000 photos I want to backup but if I select all to upload, it will freeze at some point. It's not consistently stopping on the same number. 

I recommend that you create a issue on Github for that because I'm only the template maintainer.

Here is their Github Issue tracker: Click

 

This seems like a really strange issue to me, does the log tell you anything why it stopped?

[neuk34]

Hello,

 

I have been trying to connect unraid to PIA VPN for hours thanks to openVPN client but I am stuck.

 

First, I have downloaded a fresh openvpn config files from PIA

Then, I have downloaded the right container from apps : OpenVPN-Client by ich777

and I followed carrefully the steps :

- 1) Rename your *.ovpn to 'vpn.ovpn' and place it in your OpenVPN-Client directory : done (capture 1)

- 2) Create in the same directory a file named 'vpn.auth' and place your Username in the first line and the Password for the connection in the second line and save it : done

- 3) Restart the container open the logs and see if the connection to your VPN establishes successfully.

 

Log results :

 

---Checking for optional scripts---
---No optional script found, continuing---
---Starting...---
ls: cannot access '/vpn/*': No such file or directory
ls: cannot access '/vpn/*': No such file or directory
Error: ipv4: FIB table does not exist.
Dump terminated
ERROR: VPN not configured!
---Checking for optional scripts---
---No optional script found, continuing---
---Starting...---
Error: ipv4: FIB table does not exist.
Dump terminated
ERROR: VPN not configured!
+ exec sg vpn -c 'openvpn --cd /vpn --config /vpn/vpn.conf --script-security 2 --redirect-gateway def1 --auth-user-pass /vpn/vpn.auth '
Options error: In [CMD-LINE]:1: Error opening configuration file: /vpn/vpn.conf
Use --help for more information.
---Checking for optional scripts---
---No optional script found, continuing---
---Starting...---
Error: ipv4: FIB table does not exist.
Dump terminated
ERROR: VPN not configured!

 

Is anyone could help me please ?

[ich777]

7 minutes ago, neuk34 said:

Options error: In [CMD-LINE]:1: Error opening configuration file: /vpn/vpn.conf

 

I'm not too familiar with PIA but I think something is wrong with the configuration as the error message suggests.

 

For example if you take Privado, they deliver a single ovpn file that you rename, put in the openvpnclient folder and create the second file with the credentials, thats it.

 

In your case something seems wrong with the configuration.

Does PIA have a free tier or free month that I can try it on my own?

[neuk34]

Hello Ich !

 

There is not trial on PIA, but I can send you in PM my access.

 

It looks like container doesn't find conf files at /mnt/disk1/appdata/openvpn-client:

 

cannot access '/vpn/*': No such file or directory

 

You can see in my previous capture that all the files are present in the directory.

I don't understand..

 

Here comes my conf :

 

client
dev tun
proto udp
remote france.privacy.network 1198
resolv-retry infinite
nobind
persist-key
persist-tun
cipher aes-128-cbc
auth sha1
tls-client
remote-cert-tls server

auth-user-pass
compress
verb 1
reneg-sec 0
<crl-verify>
-----BEGIN X509 CRL-----
"my key"
-----END X509 CRL-----
</crl-verify>

<ca>
-----BEGIN CERTIFICATE-----
my key
-----END CERTIFICATE-----
</ca>

disable-occ

 

Do you find any issue?

Thanks

Edited February 20, 2022 by neuk34

[ich777]

1 hour ago, neuk34 said:

There is not trial on PIA, but I can send you in PM my access.

Sure thing, send them over and I will test them but give me at least one or two days.

[Roukmoute]

Hi !

 

I have two questions :

 

- Is it possible to have dynamic resolution?

- Is it possible to have the sound on firefox via webgui?

 

Thanks for all your work, impressive

[ich777]

7 hours ago, Roukmoute said:

Is it possible to have dynamic resolution?

Sure thing, open up the menu for VNC on the left side, click on the gear icon and at Scaling satet it to Remote.

 

7 hours ago, Roukmoute said:

Is it possible to have the sound on firefox via webgui?

No, not in my containers.

VNC was only designed to transmit a remote desktop or at least the screen from a remote desktop without sound.

[Roukmoute]

5 hours ago, ich777 said:

Sure thing, open up the menu for VNC on the left side, click on the gear icon and at Scaling satet it to Remote.

 

No, not in my containers.

VNC was only designed to transmit a remote desktop or at least the screen from a remote desktop without sound.

Thanks, I've never paid attention to theses options for scaling the remote screen.

 

Too bad for the sound but I keep your version because it is fast!

 

Thanks a lot.

[ich777]

3 minutes ago, Roukmoute said:

Too bad for the sound but I keep your version because it is fast!

You can also use the version from @Djoss if I'm not mistaken, he has built in Audio at least I think.

 

As always, take whatever fits your needs best.

[MIB75]

I've got some issues using the OpenVPN-client. In the description I see this:

 

Quote

and write down the port(s) that you need to connect to.
After that go back to edit this containers template and add the port that you have noted in the above step to this container and click 'Apply' now you can connect to the container that you tunneld the traffic though this container.

 

Can someone elaborate on this? It's not clear to me what to do here.

[ich777]

54 minutes ago, MIB75 said:

Can someone elaborate on this? It's not clear to me what to do here.

What is the exact issue or what do you need exactly?

 

If the container who you are routing through the traffic has for example a WebGUI and in this is mapped in the container form let's say container port 8080 to the host port 8090 you have to create the exact same mapping in the OpenVPN-Client container.

[MIB75]

16 hours ago, ich777 said:

What is the exact issue or what do you need exactly?

 

If the container who you are routing through the traffic has for example a WebGUI and in this is mapped in the container form let's say container port 8080 to the host port 8090 you have to create the exact same mapping in the OpenVPN-Client container.

 

Thanks for the reply. This made me realize I just had to take things step by step and it is as simple as you state it here. I was doing multple things at once. Never a good idea... Now it works.

[TexasUnraid]

Trying to setup your Debian-APT-Mirror docker but having an odd issue.

 

---Checking if UID: 99 matches user---
usermod: no changes
---Checking if GID: 100 matches user---
usermod: no changes
---Adding user: debian to www-data---
The user `debian' is already a member of `www-data'.
---Setting umask to 0000---
---Checking for optional scripts---
---No optional script found, continuing---
---Starting cron---
---Starting apache2---
---Starting...---
---Something went horribly wrong, can't find the mirror directory!---

 

I have checked things over and over, I have the folder mapped to valid paths, if I manually create files in these folders, either inside the docker or on the server side, it is visible and editable from both ends.

 

I also manually created the mirror dir under the data folder but didn't help. It is like it is using another folder tree entirely.

 

I manually started apt-mirror and it ran but started filling up my docker image but I could not figure out where the files were going. It is using all default settings in the mirror.list file for now. The download itself seemed to be working fine.

[ich777]

9 hours ago, TexasUnraid said:

Trying to setup your Debian-APT-Mirror docker but having an odd issue.

I will look into this ASAP, please give me a few days... hope that's not to late for you...

[TexasUnraid]

7 hours ago, ich777 said:

I will look into this ASAP, please give me a few days... hope that's not to late for you...

No worries, luckily I was getting a head start on this project so I have some time to spare.

 

Thanks!

[comet424]

im having 0 luck getting luckybackup to work..  the pre-setup of the ssh-keys  is not working    no matter what  you still gotta type in the Root user password on the remote computer..  driving me nuts..

[ich777]

47 minutes ago, comet424 said:

im having 0 luck getting luckybackup to work..  the pre-setup of the ssh-keys  is not working    no matter what  you still gotta type in the Root user password on the remote computer..  driving me nuts..

What have you done so far? What are you typing in, with no context I can't help...

[comet424]

sorry i followed  the unraid Luckybackup  blog step by step..    that failed..  always asks for password  

i also  done

i made a couple posts  getting no where..  i tried other SSH-keygens..  it used to work couple unraid versions ago but no matter what i do..  if i use a different name then "ID_RSA"  its 100% busted

 

https://forums.unraid.net/topic/120487-has-ssh-keys-changed-i-cant-seem-to-get-it-to-work-anymore-access-site-a-to-b/

https://forums.unraid.net/topic/120488-site-to-site-ssh-key-gen-creator-and-setup/

 

 i have 5 unraid servers

i dont want to be using   ID_RSA for all 5  

i want 

Tower =   tower.pub

Backupserver = backupserver.pub

 

problem is   its not working ..    

if you do   /root/.ssh/id_rsa  

that works but if i change things to  /root/.ssh/tower

 

then the whole setup is broken.. and i getting frustrated   cuz  nothing works  other then  id_rsa

file name..  maybe 2  unraid versions ago  i had no problem  but now  i cant use  other then  id_rsa

 

i start over and try a different version  i try a different youtube video

 

nothing seems to work when you use an alternative  word to  id_rsa  for the public and master key 

 

plus my 1 article  you can see the Luckybackup glitchy screen displays too asking for a password when it shouldnt need one.. and then    icons over top of ok cancel buttons

 

Edited February 25, 2022 by comet424

[comet424]

following this 

https://unraid.net/blog/unraid-server-backups-with-luckybackup

failed 100%

i guess right from the ssh-keygen  

 

guess unraid does not accept  giving a name  for the key   without problems

 

 

so non of the servers can have the   "id_rsa.pub"   as i want  luckybackup setup on all 5 unraid servers

all 5 have the pub keys  of the other servers..  

 

but it seems  there is an issue  that anything but "id_rsa"  is used is a problem

Edited February 25, 2022 by comet424

[comet424]

i given up for today.. i have wasted more the 8 hours  just to get    Main  server to talk to first remote server  with    "mainserver.pub"   not  "id_rsa.pub"  

 

driven me nuts  

[ich777]

1 minute ago, comet424 said:

driven me nuts  

Can you please not spam the thread, you have now posted in 3 different spots on the forums, please read the forum rules!

You have to wait a few hours that you get an answer...

[comet424]

i wasnt spaming your the one that asked 

"What have you done so far? What are you typing in, with no context I can't help... "

 

so i was just telling you what i been doing as up to 5 min ago..

 cuz i been sitting at this chair 8 hours straight  trying to get it to work

 

sorry