Banuseka 3 Posted January 23 Share Posted January 23 On 1/22/2021 at 8:53 AM, ich777 said: Have you installed any additional modules? This looks like a module related error. I have now tried to install it from scratch and it works just fine. hmm i just found that even my wohle config is gone. non of my installiert modules are in the modules folder, and the configfile is a default one... Quote Link to post
chenzo 0 Posted January 23 Share Posted January 23 Hey Guys Can anyone help my adjust the Resolution on DirSyncPro? I've tried adding variables, but seems to not apply. Any advice? Quote Link to post
ich777 1342 Posted January 24 Author Share Posted January 24 7 hours ago, chenzo said: Can anyone help my adjust the Resolution on DirSyncPro? This container didn't support a resolution change, I can implement it if it's really needed... What you also can do is to enable 'local scaling' in the noVNC options like this (but keep in mind this can look a bit washed out depending on the screensize): (the picture is actually German but I think where you can find it) Quote Link to post
ich777 1342 Posted January 24 Author Share Posted January 24 9 hours ago, Banuseka said: hmm i just found that even my wohle config is gone. non of my installiert modules are in the modules folder, and the configfile is a default one... This is really strange and shouldn't happen, are you sure that everything is gone since I tried it with the basic or at least the default configuration and it started up just fine. Quote Link to post
Banuseka 3 Posted January 24 Share Posted January 24 7 hours ago, ich777 said: This is really strange and shouldn't happen, are you sure that everything is gone since I tried it with the basic or at least the default configuration and it started up just fine. I will just try to reinstall the docker and backup the config this time 1 Quote Link to post
ich777 1342 Posted January 24 Author Share Posted January 24 1 hour ago, Banuseka said: I will just try to reinstall the docker and backup the config this time Yes, please report back if everything is working for you normaly... Strange error, only heard of that when a module is out of date or depricated and doesn't work anymore... Quote Link to post
chenzo 0 Posted January 24 Share Posted January 24 15 hours ago, ich777 said: This container didn't support a resolution change, I can implement it if it's really needed... What you also can do is to enable 'local scaling' in the noVNC options like this (but keep in mind this can look a bit washed out depending on the screensize): (the picture is actually German but I think where you can find it) Thanks for the tip. That stretches everything out a bit and more legible. Was hoping for more dirsyncpro screen real estate though. Not sure if anyone else has requested custom resolutions, but I would welcome it Love you work 👍 Quote Link to post
ich777 1342 Posted January 24 Author Share Posted January 24 6 minutes ago, chenzo said: Not sure if anyone else has requested custom resolutions, but I would welcome it I will take a look into this next week. Eventually I can do something about it but I wasn't aware of that this is necessary but this could lead to other problems but as said, I will look into this. 1 Quote Link to post
Banuseka 3 Posted January 25 Share Posted January 25 16 hours ago, ich777 said: Yes, please report back if everything is working for you normaly... Strange error, only heard of that when a module is out of date or depricated and doesn't work anymore... OK tried to reinstall... now everything woks but obviously have to reconfigure.... for some reaseon port 8080 does not allow me to connect, so had to change that. 1 Quote Link to post
ich777 1342 Posted January 25 Author Share Posted January 25 On 1/18/2021 at 11:15 PM, njdowdy said: I have experienced this in other dockers using novnc, but those dockers included an option in the side-bar menu > "Settings" > "Advanced" to adjust compression level. That seems to be missing here (other docker on left; ferdi docker on right). Thank you again! Bumped noVNC to version 1.2.0, you now have the ability to use the sliders like you have it in other containers. 1 Quote Link to post
njdowdy 1 Posted January 25 Share Posted January 25 54 minutes ago, ich777 said: Bumped noVNC to version 1.2.0, you now have the ability to use the sliders like you have it in other containers. That worked! It looks so much better now. Thank you! 1 Quote Link to post
xtrips 2 Posted January 26 Share Posted January 26 Hello There was an auto update of Jdownloader docker today, and after that it fails to connect to server no matter what. Any fix? Quote Link to post
ich777 1342 Posted January 26 Author Share Posted January 26 54 minutes ago, xtrips said: Hello There was an auto update of Jdownloader docker today, and after that it fails to connect to server no matter what. Any fix? I have updated the noVNC version, can you try to force reload the page CTRL+R or SHIFT+R (depending on the browser), or delete the site from your browser history. Can you also post a screenshot from your template configuration, have you included something custom? EDIT: You should now have this options: Quote Link to post
6of6 7 Posted January 27 Share Posted January 27 I may have the same issue as xtrips... unRAID 6.8.3, CA said there was an update to luckyBackup, so I updated. Now, launching the WebUI results in a noVNC screen with, "Failed to connect to server" across the top in a red banner. Unfortunately, I've only been using unRAID for a little over a month and I'm not very familiar with trouble-shooting things within it, or Dockers. The one thing I found, in the log, that looked odd was... ---Version Check--- ---luckyBackup not found, downloading and installing v0.5.0...--- I'm sorry, maybe the above is normal. I really like luckyBackup. Beyond being an excellent GUI for rsync, it's an excellent learning tool (the way the command line, with all the arguments are shown) -- a real jewel! 6. Quote Link to post
ich777 1342 Posted January 27 Author Share Posted January 27 29 minutes ago, 6of6 said: Failed to connect to server I bumped the version of all noVNC containers please look one post above. Force a refresh of the page in your browser and it should work fine. Quote Link to post
6of6 7 Posted January 27 Share Posted January 27 I read/did the above before posting. Using Firefox (no history), refresh, sadly, doesn't do anything except refresh/reproduce the error. Can you push the previous version? I'll pull it as ich777:previous (just learned about docker tags/versions, or whatever tag you choose?) and confirm that it works as it did. Unfortunately, I can't roll it back on my own. Not smart enough (yet). I really just want it to work again. 6. Quote Link to post
ich777 1342 Posted January 27 Author Share Posted January 27 16 minutes ago, 6of6 said: I read/did the above before posting. Using Firefox (no history), refresh, sadly, doesn't do anything except refresh/reproduce the error. Are you sure that you completely refreshed the page? I tried it now and it works flawlessly: Can you open up the side panel of noVNC and click on the gear icon and on 'Advanced' and see if you got the Quality and Compression level options? EDIT: On the bottom it should say 'Version: 1.2.0' like in the screenshot. If not the page refresh wasn't successful. Can you also try to force a update of the Container and after that post the log output here in a .txt document if possible? What browser are you using to connect to? If it's Firefox try to hold SHIFT and click on the icon. Quote Link to post
6of6 7 Posted January 27 Share Posted January 27 I have completely refreshed the page (and checked myscript-blockers very thoughly). My "left menu/novnc menu" only has the "cog/settings" and the "resize screen?" the icon above the cog as you display it. Hah? :)... Learned to attach an image without having to host it myself... maybe... guess I won't know until the big delay posting this message. Anyway... there's my screen. I hope (fingers crossed) 6. Quote Link to post
ich777 1342 Posted January 27 Author Share Posted January 27 1 minute ago, 6of6 said: I have completely refreshed the page (and checked myscript-blockers very thoughly). Looks good. Can you attach the log from the Container itself, now tried it on a running instance of Firefox that was not updated yet on a buddy's box and everything works fine after the update. To attach the log, click on the Container icon and click on Logs then select the whole text with CTRL+A and create a text file on your desktop and paste the whole text from the log, close and save it and drop it here in the answer box please. 56 minutes ago, 6of6 said: Can you push the previous version? I'll pull it as ich777:previous (just learned about docker tags/versions, or whatever tag you choose?) and confirm that it works as it did. Unfortunately, I can't roll it back on my own. Not smart enough (yet). Yes I could but I think there is something wrong with your installation since it works on another box. Have you any special configurations in the template, eventually a screenshot from the template also would be helpful. Also that's not your fault, I only push one version of my containers and that's mostly always latest or amd64 since my Containers work a little different. The Containers check on every start/restart if there is a newer version of the application available and install them if a newer version is available. Quote Link to post
rockard 2 Posted January 27 Share Posted January 27 (edited) I also get the "failed to connect to server" on my luckyBackup image. Ctrl+Shift+R does no good, neither does opening the URL in an incognito window. Attached the log and screenshots of the template. docker.log Edited January 27 by rockard Quote Link to post
ich777 1342 Posted January 27 Author Share Posted January 27 4 minutes ago, rockard said: I also get the "failed to connect to server" on my luckyBackup image. What browser are you using to connect to the Container? Chrome or Firefox? The log seems fine and the application itself should be running. To delete a site completely: Chrome: On your computer, open Chrome. At the top right, click More . Click History. History. Check the box next to each item that you want to remove from your History. At the top right, click Delete. Confirm by clicking Remove. Close your browser and reopen it. Firefox: You can look for the URL by when you visited it (today, yesterday, etc.) or simply search by typing the name in the upper right search bar. Once you've located the URL, you can control click (or right click with your mouse) to open your options. Select “Forget This Site” to delete it from your history once and for all. Close your browser and reopen it. Quote Link to post
rockard 2 Posted January 27 Share Posted January 27 (edited) 12 minutes ago, ich777 said: What browser are you using to connect to the Container? Chrome or Firefox? Both Chrome and Edge (fired up for the first time ever to test this) give the same behaviour, and opening a page in incognito in Chrome should not use any cached resources. EDIT: Thanks for a fast reply! EDIT2: Did the delete site from history in Chrome anyway, but no difference EDIT3: Here's the output of ps from the console: # ps -ef UID PID PPID C STIME TTY TIME CMD root 1 0 0 09:12 ? 00:00:00 /bin/bash /opt/scripts/start.sh root 15 1 0 09:12 ? 00:00:00 cron -- p root 16 1 0 09:12 ? 00:00:00 su luckybackup -c /opt/scripts/start-server.sh luckyba+ 17 16 0 09:12 ? 00:00:00 /bin/bash /opt/scripts/start-server.sh luckyba+ 46 1 0 09:12 ? 00:00:00 SCREEN -S Xvfb -L -Logfile /luckybackup/XvfbLog.0 -d -m /opt/scripts/start-Xvfb.sh luckyba+ 48 46 0 09:12 pts/0 00:00:00 /bin/sh /opt/scripts/start-Xvfb.sh luckyba+ 49 48 0 09:12 pts/0 00:00:00 Xvfb :0 -screen scrn 1024x768x16 luckyba+ 57 1 0 09:12 ? 00:00:00 SCREEN -S x11vnc -L -Logfile /luckybackup/x11vncLog.0 -d -m /opt/scripts/start-x11.sh luckyba+ 59 57 0 09:12 pts/1 00:00:00 /bin/sh /opt/scripts/start-x11.sh luckyba+ 63 1 0 09:12 ? 00:00:00 SCREEN -d -m env HOME=/etc /usr/bin/fluxbox luckyba+ 65 63 0 09:12 pts/2 00:00:00 /usr/bin/fluxbox luckyba+ 75 1 0 09:12 ? 00:00:00 /usr/bin/python2.7 /usr/bin/websockify -D --web=/usr/share/novnc/ --cert=/etc/ssl/novnc.pem 8080 localhost:5900 luckyba+ 84 17 0 09:12 ? 00:00:00 /luckybackup/luckybackup root 2006 0 0 09:43 pts/3 00:00:00 sh luckyba+ 2031 59 0 09:43 pts/1 00:00:00 sleep 1 root 2032 2006 0 09:43 pts/3 00:00:00 ps -ef # Edited January 27 by rockard Quote Link to post
ich777 1342 Posted January 27 Author Share Posted January 27 7 minutes ago, rockard said: Both Chrome and Edge (fired up for the first time ever to test this) give the same behaviour, and opening a page in incognito in Chrome should not use any cached resources. EDIT: Thanks for a fast reply! EDIT2: Did the delete site from history in Chrome anyway, but no difference Wait a moment in the case of luckyBackup I can reproduce the error. I will look into this. Please give me a little bit. 1 Quote Link to post
6of6 7 Posted January 27 Share Posted January 27 19 minutes ago, ich777 said: Yes I could but I think there is something wrong with your installation If you can, please do and I will pull it with whatever tag you wish... I don't doubt, for a second, that I've screwed many things up. I just want luckyBackup to work again. 6. 1 Quote Link to post
rockard 2 Posted January 27 Share Posted January 27 2 minutes ago, ich777 said: Wait a moment in the case of luckyBackup I can reproduce the error. I will look into this. Please give me a little bit. The VNC log file from the container has errors, attached an excerpt from it vnc.log 1 Quote Link to post
1111 posts in this topic Last Reply
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.