October 4, 20196 yr Hello, I previously had two drives produce a number of read/write errors. One of which was my parity drive. I re-seated and swapped cabling, and when I booted everything up my parity was in an error state. I then reseated cabling again and ran extended SMART tests on both drives to see if there are any issues. The SMART tests completed without errors and so I plan to reenable the parity drive. However, before doing so I would like to see if someone could review the attached SMART reports for both drives and confirm there are no red or yellow flags in the report. Thank you WDC_WD80EMAZ-00WJTA0_7JHHEJ2G-20191004-2308 parity (sdd) - DISK_DSBL.txt WDC_WD80EMAZ-00WJTA0_7JKUG0KC-20191004-2308 disk2 (sdc).txt
October 5, 20196 yr Community Expert Nothing springs out as indicating any sign of problems with either drive as far as I can see. Edited October 5, 20196 yr by itimpi
Archived
This topic is now archived and is closed to further replies.