jackfalveyiv Posted October 23, 2021 Share Posted October 23, 2021 My issue is resolved, a second reboot of my Unraid server solved the problem and transcoding is back to running normally. Quote Link to comment
absent Posted October 24, 2021 Share Posted October 24, 2021 So, I recently upgraded my server and seemed to have put my foot in it by choosing 11th gen (11500) as no suggestions here for the likes of 10th gen will get QuickSync working… Has anyone had any luck getting this transcoding with these Rocket Lake based UHD 750 iGPU chips yet? I’ve experienced it easily doing 6 x 4K > 1080p 10m streams in Plex so know it’s got grunt, so I’m apprehensive to buy a discrete GPU (like a now inferior p2000/2200) for transcoding! Or having to cough up a lot more for an RTX (A)4000 where QuickSync will probably work eventually… One thing about Tdarr is the lack of documentation is next level, if you’re not a developer I really struggle to know how you’d set it up and use it. Concept is amazing though! Quote Link to comment
wgstarks Posted October 30, 2021 Share Posted October 30, 2021 It looks like most people are using this docker for GPU transcoding. I don’t have a GPU in my unRAID server and no slot to install one so I’m wondering if anyone is using this docker with CPU transcoding and how well it performs on say 2 cores? I don’t want it to interfere with other operations. Quote Link to comment
Knh68 Posted October 30, 2021 Share Posted October 30, 2021 I'm quite interested in tdarr, before i have a crack at this tdarr can anyone tell me can you preserve a dolby atmos or dtshd track while converting movie formats say from h264 to h265.? Quote Link to comment
leejbarker Posted October 31, 2021 Share Posted October 31, 2021 On 10/30/2021 at 12:59 PM, wgstarks said: It looks like most people are using this docker for GPU transcoding. I don’t have a GPU in my unRAID server and no slot to install one so I’m wondering if anyone is using this docker with CPU transcoding and how well it performs on say 2 cores? I don’t want it to interfere with other operations. Should be fine, will just be very very slow. Quote Link to comment
wgstarks Posted October 31, 2021 Share Posted October 31, 2021 39 minutes ago, leejbarker said: Should be fine, will just be very very slow. Thanks for the reply. I knew it would be slow but it’s not a good time to be upgrading. I would need a new motherboard (and probably new cpu) in addition to a GPU. My current motherboard doesn’t have an x16 slot. Currently I’m using handbrake on a desktop to re-encode and that works ok but it’ll be more than a year to do 2000+ videos. My plan is to use this docker to help with that workload and also re-encode any new x264 videos that get added in the meantime. Now I just need to find a “TDARR For Dummies” guide.😁 Quote Link to comment
wgstarks Posted November 1, 2021 Share Posted November 1, 2021 Trying to work out the plugin creator. If I want to import a preset from handbrake on my desktop do I just copy the exported json file to a location in the docker and enter this into the custom presets? --preset-import-file "/mnt/media/h.265 10-bit.json" -Z "My Preset h.265 10-bit" Will that json be saved into tdarr or do I need to leave it for each use? Quote Link to comment
wgstarks Posted November 1, 2021 Share Posted November 1, 2021 10 hours ago, wgstarks said: Trying to work out the plugin creator. If I want to import a preset from handbrake on my desktop do I just copy the exported json file to a location in the docker and enter this into the custom presets? --preset-import-file "/mnt/media/h.265 10-bit.json" -Z "My Preset h.265 10-bit" Will that json be saved into tdarr or do I need to leave it for each use? Must have screwed up something. Test file keeps erroring. [2021-10-31T20:59:34.728] [INFO] Tdarr_Node - Processing file: /mnt/media/tdarr_output/The Silence of the Lambs (1991).Remux-2160p.HEVC DTS-HD MA-FGT.mkv [2021-10-31T20:59:35.082] [WARN] Tdarr_Node - Tdarr ALERT: NO OUTPUT FILE PRODUCED: /temp/The Silence of the Lambs (1991).Remux-2160p.HEVC DTS-HD MA-FGT-TdarrCacheFile-4DNteCotc.mkv [2021-10-31T21:04:00.676] [INFO] Tdarr_Node - Processing file: /mnt/media/tdarr_output/The Silence of the Lambs (1991).Remux-2160p.HEVC DTS-HD MA-FGT.mkv [2021-10-31T21:04:01.003] [WARN] Tdarr_Node - Tdarr ALERT: NO OUTPUT FILE PRODUCED: /temp/The Silence of the Lambs (1991).Remux-2160p.HEVC DTS-HD MA-FGT-TdarrCacheFile-KX1jjBBok.mkv [2021-10-31T21:04:04.462] [INFO] Tdarr_Node - Processing file: /mnt/media/The Horse Whisperer (1998).Remux-1080p.AVC DTS-HD MA-PmP.mkv Quote Link to comment
Xed Posted November 1, 2021 Share Posted November 1, 2021 I have been using Tdarr AIO to reencode my libraries, first Movies, and now TV library. I did not notice this with the Movies but with Plex, every TV episode that gets converted to H.265 shows up a "new episode" based upon sorting by "By Last Epsiode Date Added", I guess because the file timestamp that is getting written for the re-encoded H.265 file has been updated. Is there any way to preserve the timestamp in Tdarr from the original H.264 file? It is very hard to track new TV show releases because every few minutes there is an older show that has since been assigned a new timestamp and now Plex thinks it is new again? Quote Link to comment
wgstarks Posted November 1, 2021 Share Posted November 1, 2021 I’m thinking about purchasing a GPU to use with this docker. If I google “nividia 1080Ti” I get a wide range of prices from $100US to over $400US. I can see from the pics that aren’t the same cards. Does anyone have a recommendation for a GPU that works great and hopefully costs less than $400? I really don’t trust a $100 GPU from Walmart. Quote Link to comment
Knh68 Posted November 1, 2021 Share Posted November 1, 2021 I'd go for gtx1650 suoer or a 1660ti, one of these will decode h265 as well as encode, i bought a 1660ti as the turing card will decode h265 as well as encode, i wanted to compress my 4k collection and would've taken ages with my old maxwell gtx Titan card as that wouldn't decode h265, the 1650 super are decent and were highly recommended to me. Quote Link to comment
wgstarks Posted November 1, 2021 Share Posted November 1, 2021 2 hours ago, Knh68 said: I'd go for gtx1650 suoer or a 1660ti, one of these will decode h265 as well as encode, i bought a 1660ti as the turing card will decode h265 as well as encode, i wanted to compress my 4k collection and would've taken ages with my old maxwell gtx Titan card as that wouldn't decode h265, the 1650 super are decent and were highly recommended to me. Something like this- https://pcneeds.us/product/asus-nvidia-geforce-gtx-1660-super-oc-edition-6gb-gddr6-pci-express-3-0-graphics-card-black-gray/ I’m a little distrustful of something that cheap. Quote Link to comment
Knh68 Posted November 1, 2021 Share Posted November 1, 2021 10 minutes ago, wgstarks said: Something like this- https://pcneeds.us/product/asus-nvidia-geforce-gtx-1660-super-oc-edition-6gb-gddr6-pci-express-3-0-graphics-card-black-gray/ I’m a little distrustful of something that cheap. The 1650 super and 1660ti are better than the 1080ti and are turing cards you won't do better unless you bought a 3000 series card, i personally have the 1660ti and it's brilliant.! Quote Link to comment
JonathanM Posted November 1, 2021 Share Posted November 1, 2021 18 minutes ago, wgstarks said: Something like this- https://pcneeds.us/product/asus-nvidia-geforce-gtx-1660-super-oc-edition-6gb-gddr6-pci-express-3-0-graphics-card-black-gray/ I’m a little distrustful of something that cheap. I'm even more distrustful of an online vendor that says they operate out of a single family dwelling. Smells scammy. https://www.google.com/maps/place/68+2nd+St,+Edison,+NJ+08837/@40.537622,-74.3374659,3a,75y,112.12h,90t/data=!3m6!1e1!3m4!1sqhLVIocTMQ_iwfwcObNRPg!2e0!7i16384!8i8192!4m5!3m4!1s0x89c3b63d33a168f5:0x95459e21d5e2d4b6!8m2!3d40.5375394!4d-74.3372334 Also, compare https://pcneeds.us/refund-policy/ to https://serestcollar.com/refund-policy/ Really strange that the pcneeds site would use the same phone number as a flea and tick collar supplier. Quote Link to comment
wgstarks Posted November 2, 2021 Share Posted November 2, 2021 3 hours ago, JonathanM said: I'm even more distrustful of an online vendor that says they operate out of a single family dwelling. Smells scammy. https://www.google.com/maps/place/68+2nd+St,+Edison,+NJ+08837/@40.537622,-74.3374659,3a,75y,112.12h,90t/data=!3m6!1e1!3m4!1sqhLVIocTMQ_iwfwcObNRPg!2e0!7i16384!8i8192!4m5!3m4!1s0x89c3b63d33a168f5:0x95459e21d5e2d4b6!8m2!3d40.5375394!4d-74.3372334 Also, compare https://pcneeds.us/refund-policy/ to https://serestcollar.com/refund-policy/ Really strange that the pcneeds site would use the same phone number as a flea and tick collar supplier. And they are located in Edison Edison, NJ. I didn't stutter.😀 Very fishy. Quote Link to comment
wgstarks Posted November 2, 2021 Share Posted November 2, 2021 I'm trying to create a plugin using the plugin creator but not having much luck. I want to re-encode h265 videos that are above 40GB using an imported handbrake preset. Here's a screenshot of the plugin- When I test this on a large h265 video it just gets added to the not required queue. What did I miss??? Or perhaps there is a plugin that will already do this with 10-bit audio preserving audio and subtitles? Quote Link to comment
nametaken_thisonetoo Posted November 3, 2021 Share Posted November 3, 2021 Like many recently commenting on this thread, I have watched Space Invaders setup video and figured I would give this a go with an old 1050Ti I have kicking around. Did some initial testing and it seems to work well. I have though come across some threads where Unraid users are reporting daily loss of their Shares since using Tdarr, that can only be temporarily rectified by daily server reboots. https://forums.unraid.net/topic/114921-692-stable-release-losing-access-to-all-shares-dockers-crash-webui-still-reponsive/?tab=comments#comment-1044770 https://forums.unraid.net/bug-reports/stable-releases/683-shfs-error-results-in-lost-mntuser-r939/?tab=comments Hard to get a feel for how many people this is affecting, but eithe way I'm now feeling pretty reluctant to fire Tdarr up and set it to work on the 40TB or so of media I have. Has anyone on this thread heard of this but not experienced it, or experienced it and found a fix? Very keen to get started but the paranoia is real! Quote Link to comment
wgstarks Posted November 3, 2021 Share Posted November 3, 2021 19 minutes ago, nametaken_thisonetoo said: Like many recently commenting on this thread, I have watched Space Invaders setup video and figured I would give this a go with an old 1050Ti I have kicking around. Did some initial testing and it seems to work well. I have though come across some threads where Unraid users are reporting daily loss of their Shares since using Tdarr, that can only be temporarily rectified by daily server reboots. https://forums.unraid.net/topic/114921-692-stable-release-losing-access-to-all-shares-dockers-crash-webui-still-reponsive/?tab=comments#comment-1044770 https://forums.unraid.net/bug-reports/stable-releases/683-shfs-error-results-in-lost-mntuser-r939/?tab=comments Hard to get a feel for how many people this is affecting, but eithe way I'm now feeling pretty reluctant to fire Tdarr up and set it to work on the 40TB or so of media I have. Has anyone on this thread heard of this but not experienced it, or experienced it and found a fix? Very keen to get started but the paranoia is real! I've heard of it since CA had a warning about it on the TDARR docker pane. Haven't experienced it though (I'm just getting started with this docker too). Quote Link to comment
wgstarks Posted November 3, 2021 Share Posted November 3, 2021 25 minutes ago, nametaken_thisonetoo said: Like many recently commenting on this thread, I have watched Space Invaders setup video and figured I would give this a go with an old 1050Ti I have kicking around. Did some initial testing and it seems to work well. I have though come across some threads where Unraid users are reporting daily loss of their Shares since using Tdarr, that can only be temporarily rectified by daily server reboots. https://forums.unraid.net/topic/114921-692-stable-release-losing-access-to-all-shares-dockers-crash-webui-still-reponsive/?tab=comments#comment-1044770 https://forums.unraid.net/bug-reports/stable-releases/683-shfs-error-results-in-lost-mntuser-r939/?tab=comments Hard to get a feel for how many people this is affecting, but eithe way I'm now feeling pretty reluctant to fire Tdarr up and set it to work on the 40TB or so of media I have. Has anyone on this thread heard of this but not experienced it, or experienced it and found a fix? Very keen to get started but the paranoia is real! Here's the thread linked in CA- https://forums.unraid.net/bug-reports/stable-releases/683-shfs-error-results-in-lost-mntuser-r939/?tab=comments TL;DR- There were some reports that it was happening every 6 to 10 hours and recommendations to disable hardlink support. Global Share Settings>Tunable (support hard links) Quote Link to comment
nametaken_thisonetoo Posted November 3, 2021 Share Posted November 3, 2021 1 hour ago, wgstarks said: Here's the thread linked in CA- https://forums.unraid.net/bug-reports/stable-releases/683-shfs-error-results-in-lost-mntuser-r939/?tab=comments TL;DR- There were some reports that it was happening every 6 to 10 hours and recommendations to disable hardlink support. Global Share Settings>Tunable (support hard links) Thanks, although I can't see anywhere in that thread a recommendation to disable hardlinks. Are you able to clarify this further? Quote Link to comment
wgstarks Posted November 3, 2021 Share Posted November 3, 2021 2 minutes ago, nametaken_thisonetoo said: Thanks, although I can't see anywhere in that thread a recommendation to disable hardlinks. Are you able to clarify this further? Last comment. https://forums.unraid.net/bug-reports/stable-releases/683-shfs-error-results-in-lost-mntuser-r939/?do=findComment&comment=16138 There’s one right before it to disable NFS shares. 1 Quote Link to comment
wgstarks Posted November 3, 2021 Share Posted November 3, 2021 Keep in mind that this docker has been downloaded more than 5.6 million times so a dozen or so reports of issues isn’t really a major issue. From what I’m reading in that thread all you would need to do is reboot your server and stop using this docker if you were one of the very few who are affected. 1 Quote Link to comment
zolointo Posted November 5, 2021 Share Posted November 5, 2021 I've had tdarr plowing through my library doing h.265 transcodes and have nearly saved 2 TB of storage so far. I've got a server running on my UnRAID box and a node set up on my Windows w/ 2080ti. Problem: about 1/3 of transcodes end up in the failed queue with "The following source file cannot be accessed" when I click on the I button next to them. I've ready plenty of posts about having incorrect translate paths in the Window's node's config file, but this isn't my problem since the other 2/3s of transcodes are working fine. Node Translate Entries: { "server": "/mnt/media", "node": "\\\\192.168.1.100\\media" }, { "server": "/temp", "node": "\\\\192.168.1.100\\tdarr_cache" } I've scanned through some of the log files that I'm aware of and just see a string of "Processing file" entries on the node-side and 'everything's fine' on the server side. UnRAID array has plenty of space, cache drive has plenty of space, and the Windows node is mostly unused at the moment aside from grinding through transcodes. What else should I be looking into? Config: Health Checks: CPU only, 6, only on Node Transcodes: GPU only, 2, only on Node Quote Link to comment
Knh68 Posted November 5, 2021 Share Posted November 5, 2021 On 10/30/2021 at 6:21 PM, Knh68 said: I'm quite interested in tdarr, before i have a crack at this tdarr can anyone tell me can you preserve a dolby atmos or dtshd track while converting movie formats say from h264 to h265.? Any ideas on this one guys.? Quote Link to comment
zolointo Posted November 5, 2021 Share Posted November 5, 2021 3 hours ago, zolointo said: Problem: about 1/3 of transcodes end up in the failed queue with "The following source file cannot be accessed" when I click on the I button next to them. I've ready plenty of posts about having incorrect translate paths in the Window's node's config file, but this isn't my problem since the other 2/3s of transcodes are working fine. Figured it out. Instead of checking the tdarr logs on my Windows node, I went to the Event Viewer. Cause 1: My NIC dropped connectivity for a second or two. tdarr goes ballistic and flags queued transcodes as fast as it can with the 'source file cannot be accessed' until the NIC came back online. These can be batches of 100 - 200! Cause 2: I updated my Nvidia driver. While the Node was running. What an idiot! Might as well hot-swap a video card next time. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.