[Support] HaveAGitGat - Tdarr: Audio/Video Library Analytics & Transcode Automation


Recommended Posts

1 hour ago, wgstarks said:

If you select the TDARR tab go to the bottom of the page and select Transcode: Error Cancelled you’ll see a list of video transcodes that were cancelled due to errors (default is 20). Each one has an info button next to it as well as requeue and ignore. If you select info you’ll get a popup with a description of the error.

Thanks for this .... didnt see the option. Got it.

 

Well the last few lines of the error log:

 

DURATION : 01:15:02.089000000

[h264_cuvid @ 0x559aa61e5680] Cannot load libnvcuvid.so.1

[h264_cuvid @ 0x559aa61e5680] Failed loading nvcuvid.

Stream mapping:

Stream #0:0 -> #0:0 (h264 (h264_cuvid) -> hevc (hevc_nvenc))

Stream #0:1 -> #0:1 (copy)

Stream #0:2 -> #0:2 (copy)

Error while opening decoder for input stream #0:0 : Operation not permitted

 

This is the most popular error .... well back to the drawing board .....

 

Thanks again

 

toolmanz

 

Link to comment
6 hours ago, toolmanz said:

Thanks for this .... didnt see the option. Got it.

 

Well the last few lines of the error log:

 

DURATION : 01:15:02.089000000

[h264_cuvid @ 0x559aa61e5680] Cannot load libnvcuvid.so.1

[h264_cuvid @ 0x559aa61e5680] Failed loading nvcuvid.

Stream mapping:

Stream #0:0 -> #0:0 (h264 (h264_cuvid) -> hevc (hevc_nvenc))

Stream #0:1 -> #0:1 (copy)

Stream #0:2 -> #0:2 (copy)

Error while opening decoder for input stream #0:0 : Operation not permitted

 

This is the most popular error .... well back to the drawing board .....

 

Thanks again

 

toolmanz

 

Have you set up the GPU variables?

https://docs.tdarr.io/docs/installation/unraid

 

https://unraid.net/de/blog/unraid-6-9-capture-encoding-and-streaming-server

 

You need to use the Nvidia Driver package:

nvidiaDriverPluginPage.png

Link to comment

Thanks all for your suggestions.

In the course of reviewing my settings I may have discovered a problem with my shares and how Tdarr is configured.....

 

I will look into it by removing both dockers and then reinstalling them with (hopefully) a correct configuration. 

 

It has to do with the use of the "media" folder .... I don't have one of those - my media files hang as there own shares ....🥴

 

More later.....

Link to comment

I just updated from 2.00.10 (working) to 2.00.13 and I'm getting this error:

[ERROR] Tdarr_Node - [39mBinary test 3: mkvpropeditPath not working

 

It was working on my previous version.  My json is blank for all 3 of these binaries:

  "handbrakePath": "",
  "ffmpegPath": "",
  "mkvpropeditPath": "",

 

Do I need to point it to a specific path?

Link to comment

So I've been running Tdarr/node for a few months now to transcode my library and it has worked great for the most part. I have run into a few issues with files that either fail health check or fail to transcode and can't figure out why. The files play fine using Plex and MPV but then throw errors for Tdarr. Would love some help or insight on how to fix my setup/plugins so these stop happening.

 

I have 3 mp4-mkv transcodes so far that have failed with the following at the end of the info log:

Spoiler

Only audio, video, and subtitles are supported for Matroska.

Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument

Error initializing output stream 0:0 --

Conversion failed!

 

One of them below:

 

The Hobbit (Transcode: Error/Cancelled)

Spoiler

NodeID: RC Desktop

Command:

C:/Users/RCM02/Desktop/tdarr/Tdarr_Node/node_modules/@ffmpeg-installer/win32-x64/ffmpeg.exe -c:v h264_cuvid -i Z:/movies/The Hobbit (1977)/The Hobbit (1977) WEBRip-1080p.mp4 -map 0 -c:v hevc_nvenc -rc:v vbr_hq -cq:v 19 -b:v 3593k -minrate 2515k -maxrate 4670k -bufsize 7186k -spatial_aq:v 1 -rc-lookahead:v 32 -c:a copy -c:s copy -max_muxing_queue_size 9999 -pix_fmt p010le -bf 5 -map -v:1 Y:/The Hobbit (1977) WEBRip-1080p-TdarrCacheFile-C6J1ifyAT.mkv

Last 200 lines of CLI log:

ffmpeg version N-92722-gf22fcd4483 Copyright (c) 2000-2018 the FFmpeg developers

built with gcc 8.2.1 (GCC) 20181201

configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-amf --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt

libavutil 56. 24.101 / 56. 24.101

libavcodec 58. 42.102 / 58. 42.102

libavformat 58. 24.101 / 58. 24.101

libavdevice 58. 6.101 / 58. 6.101

libavfilter 7. 46.101 / 7. 46.101

libswscale 5. 4.100 / 5. 4.100

libswresample 3. 4.100 / 3. 4.100

libpostproc 55. 4.100 / 55. 4.100

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] stream 0, timescale not set

[h264 @ 000001aac9590800] data partitioning is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.

[h264 @ 000001aac9590800] If you want to help, upload a sample of this file to ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list. ([email protected])

[h264 @ 000001aac9590800] no frame!

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] Stream #3: not enough frames to estimate rate; consider increasing probesize

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] decoding for stream 3 failed

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] Could not find codec parameters for stream 3 (Video: h264, none): unspecified size

Consider increasing the value for the 'analyzeduration' and 'probesize' options

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Z:/movies/The Hobbit (1977)/The Hobbit (1977) WEBRip-1080p.mp4':

Metadata:

major_brand : mp42

minor_version : 0

compatible_brands: mp42isomavc1

creation_time : 2020-01-15T21:18:58.000000Z

title : The.Hobbit.1977.1080p.WebRip.H264.AC3.DD2.0.Will1869

artist :

album :

comment :

encoder : DVDFab 11.0.4.2

Duration: 01:17:25.09, start: 0.000000, bitrate: 7534 kb/s

Chapter #0:0: start 0.000000, end 151.025833

Metadata:

title : Chapter 1

Chapter #0:1: start 151.025833, end 217.008375

Metadata:

title : Chapter 2

Chapter #0:2: start 217.008375, end 486.027125

Metadata:

title : Chapter 3

Chapter #0:3: start 486.027125, end 619.035000

Metadata:

title : Chapter 4

Chapter #0:4: start 619.035000, end 714.004833

Metadata:

title : Chapter 5

Chapter #0:5: start 714.004833, end 779.028125

Metadata:

title : Chapter 6

Chapter #0:6: start 779.028125, end 850.015667

Metadata:

title : Chapter 7

Chapter #0:7: start 850.015667, end 923.005250

Metadata:

title : Chapter 8

Chapter #0:8: start 923.005250, end 1026.024792

Metadata:

title : Chapter 9

Chapter #0:9: start 1026.024792, end 1093.008375

Metadata:

title : Chapter 10

Chapter #0:10: start 1093.008375, end 1181.012917

Metadata:

title : Chapter 11

Chapter #0:11: start 1181.012917, end 1311.017792

Metadata:

title : Chapter 12

Chapter #0:12: start 1311.017792, end 1419.000667

Metadata:

title : Chapter 13

Chapter #0:13: start 1419.000667, end 1847.011542

Metadata:

title : Chapter 14

Chapter #0:14: start 1847.011542, end 2069.024958

Metadata:

title : Chapter 15

Chapter #0:15: start 2069.024958, end 2310.015708

Metadata:

title : Chapter 16

Chapter #0:16: start 2310.015708, end 2405.027250

Metadata:

title : Chapter 17

Chapter #0:17: start 2405.027250, end 2544.041125

Metadata:

title : Chapter 18

Chapter #0:18: start 2544.041125, end 2623.036708

Metadata:

title : Chapter 19

Chapter #0:19: start 2623.036708, end 2743.031542

Metadata:

title : Chapter 20

Chapter #0:20: start 2743.031542, end 2946.026000

Metadata:

title : Chapter 21

Chapter #0:21: start 2946.026000, end 3171.000708

Metadata:

title : Chapter 22

Chapter #0:22: start 3171.000708, end 3641.011917

Metadata:

title : Chapter 23

Chapter #0:23: start 3641.011917, end 3696.025167

Metadata:

title : Chapter 24

Chapter #0:24: start 3696.025167, end 3882.002583

Metadata:

title : Chapter 25

Chapter #0:25: start 3882.002583, end 4067.020750

Metadata:

title : Chapter 26

Chapter #0:26: start 4067.020750, end 4174.002625

Metadata:

title : Chapter 27

Chapter #0:27: start 4174.002625, end 4348.009792

Metadata:

title : Chapter 28

Chapter #0:28: start 4348.009792, end 4473.009667

Metadata:

title : Chapter 29

Chapter #0:29: start 4473.009667, end 4585.038208

Metadata:

title :

Chapter 30

Chapter #0:30: start 4585.038208, end 4644.264042

Metadata:

title : Chapter 31

Stream #0:0(und): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, bt709), 1924x1040 [SAR 1:1 DAR 37:20], 7147 kb/s, 23.98 fps, 23.98 tbr, 24k tbn, 47.95 tbc (default)

Metadata:

creation_time : 2020-01-15T21:18:58.000000Z

encoder : JVT/AVC Coding

Stream #0:1(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, stereo, fltp, 384 kb/s (default)

Metadata:

creation_time : 2020-01-15T21:18:58.000000Z

Side data:

audio service type: main

Stream #0:2(und)

: Data: bin_data (text / 0x74786574), 0 kb/s

Metadata:

creation_time : 2020-01-15T21:18:58.000000Z

Stream #0:3: Video: h264, none, 90k tbr, 90k tbn, 180k tbc

Stream mapping:

Stream #0:0 -> #0:0 (h264 (h264_cuvid) -> hevc (hevc_nvenc))

Stream #0:1 -> #0:1 (copy)

Stream #0:2 -> #0:2 (copy)

Press [q] to stop, [?] for help

[matroska @ 000001aacb28e9c0] Only audio, video, and subtitles are supported for Matroska.

Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument

Error initializing output stream 0:0 --

Conversion failed!

 

I also have 9 mkv files that have failed health checks before even getting to the transcoder and at the end they all say:

 

Spoiler

scan: unrecognized file type

[15:22:39] libhb: scan thread found 0 valid title(s)

No title found.

HandBrake has exited.

 

Specific example with full info log:

 

Komi Can't Communicate S01E11 (Health check: Error/Cancelled)

Spoiler

NodeID: RC Desktop

Command:

C:/Users/RCM02/Desktop/tdarr/Tdarr_Node/assets/app/HandBrakeCLI.exe -i Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv -o Y:/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p-TdarrCacheFile-8KthqV_5x.mp4 --scan

Last 200 lines of CLI log:

[15:22:39] Compile-time hardening features are enabled

[15:22:39] hb_init: starting libhb thread

[15:22:39] thread 1 started ("libhb")

HandBrake 1.4.2 (2021100300) - MinGW x86_64 - https://handbrake.fr

8 CPUs detect

ed

Opening Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S

01E11 - It's Just a Performance for the Culture Festival + It's Just Festival

Preparations + It's Just Flyers Distribution

+ It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv...

[15:22:39] CPU: Intel(R) Core(TM) i3-10100F CPU @ 3.60GHz

[15:22:39]

- Intel microarchitecture Comet Lake

[15:22:39] - logical processor count: 8

[15:22:39] Intel Quick Sync Video support: no

[15:22:39] hb_scan: path=Z

:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 -

It's Just a Performance for the Culture Festival + It'

s Ju

st Festival Preparations + It's Just Flyers Distribution + I

t's J

ust the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv,

title_i

ndex=1

src/libbluray/disc/disc.c:333: failed opening UDF image Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv

src/libbluray/disc/disc.c:437: error opening file BDMV\index.bdmv

src/libbluray/disc/disc.c:437: error opening file BDMV\BACKUP\index.bdmv

src/libbluray/bluray.c:2646: nav_get_title_list(Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv\) failed

[15:22:39] bd: not a bd - trying as a stream/file instead

libdvdread: Encryp

libdvdread: Could not open input:

libdvdread:

ted DVD support unavailable.

Can't open Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just

Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids

WEBRip-1080p.mkv for reading

libdvdnav: vm:

failed to open/read the DVD

[15:22:39] dvd: not a dvd - trying as a stream/file instead

[15:22:39] hb

_stream_open: open Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture F

estival Eve + It's Just Maids WEBRip-1080p.mkv failed

[15:22:39] s

can: unrecognized file type

[15:22:39] libhb: scan thread found 0 valid title(s)

No title found.

HandBrake has exited.

 

Any help with this is appreciated.

 

Thanks

Link to comment

Hi guys, i plan to rip my 17tb of movies down in size probably to h. 265, i want to keep the HD tracks and subs, i want to keep a reasonable amount of quality as movies will be used on a projector as well as TV on plex. 

Which plugins can you recommend.? 

A 1660ti gpu will be doing the transcoding by the way. 

Link to comment
On 1/28/2022 at 2:26 PM, J05u said:

Any chance to run 2 nodes from 1 server? I am currently running one instance of Tdarr with 2 nodes. 

1 node is working fine, second node just appears for a sec and disappear immediately.

 

Or i have to run 2nd node on 2nd PC? I have 2 GPu's in server

I tried this since yesterday aswell. The Tdarr Server Logs will tell you that it expected a different Node ID (the name you set). I think this is because even if you change the Node Port in unraids docker template, the config file in /app/configs still sets the Node Port to 8267.

The Problem is, if I change the Port to the same as the Port I set in the template the Server cant contact the Node anymore.

Spoiler

nodeID 'GTX1050' could not be contacted by the server.
       Please make sure the IP and Port are correct else it may be a firewall issue.

 

Now I finally got it working by using the "internal docker IPs". Probably not the cleanest way, but it works for me for now.

This is how my templates are looking https://imgur.com/a/nOs1V3P

  • Like 1
Link to comment
I tried this since yesterday aswell. The Tdarr Server Logs will tell you that it expected a different Node ID (the name you set). I think this is because even if you change the Node Port in unraids docker template, the config file in /app/configs still sets the Node Port to 8267.
The Problem is, if I change the Port to the same as the Port I set in the template the Server cant contact the Node anymore.
Spoiler

nodeID 'GTX1050' could not be contacted by the server.
       Please make sure the IP and Port are correct else it may be a firewall issue.

 
Now I finally got it working by using the "internal docker IPs". Probably not the cleanest way, but it works for me for now.
This is how my templates are looking https://imgur.com/a/nOs1V3P


Wow great, so basically you just changed ip of second node as I see right from my phone :) I will try it from home. Thanks mate


Отправлено с моего iPhone используя Tapatalk
Link to comment
On 1/29/2022 at 10:39 PM, fujo7 said:

I tried this since yesterday aswell. The Tdarr Server Logs will tell you that it expected a different Node ID (the name you set). I think this is because even if you change the Node Port in unraids docker template, the config file in /app/configs still sets the Node Port to 8267.

The Problem is, if I change the Port to the same as the Port I set in the template the Server cant contact the Node anymore.

  Hide contents

nodeID 'GTX1050' could not be contacted by the server.
       Please make sure the IP and Port are correct else it may be a firewall issue.

 

Now I finally got it working by using the "internal docker IPs". Probably not the cleanest way, but it works for me for now.

This is how my templates are looking https://imgur.com/a/nOs1V3P

unfortunately can't make it working :( now don't see both nodes

Link to comment
On 2/5/2022 at 10:39 PM, Flappy_asdf said:

Hi!

Got tdarr and had some movies in my libary transcoded them no issues.

However, added some more today now when I try it attempts to re-transcode the videos it already has - how do I fix this? I pressed scan 'new' but still same issue. How to fix this?

 

Thanks for the help!

Which plugins/transcode settings are you using?

Link to comment
On 1/28/2022 at 10:33 PM, rcm024 said:

So I've been running Tdarr/node for a few months now to transcode my library and it has worked great for the most part. I have run into a few issues with files that either fail health check or fail to transcode and can't figure out why. The files play fine using Plex and MPV but then throw errors for Tdarr. Would love some help or insight on how to fix my setup/plugins so these stop happening.

 

I have 3 mp4-mkv transcodes so far that have failed with the following at the end of the info log:

  Hide contents

Only audio, video, and subtitles are supported for Matroska.

Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument

Error initializing output stream 0:0 --

Conversion failed!

 

One of them below:

 

The Hobbit (Transcode: Error/Cancelled)

  Hide contents

NodeID: RC Desktop

Command:

C:/Users/RCM02/Desktop/tdarr/Tdarr_Node/node_modules/@ffmpeg-installer/win32-x64/ffmpeg.exe -c:v h264_cuvid -i Z:/movies/The Hobbit (1977)/The Hobbit (1977) WEBRip-1080p.mp4 -map 0 -c:v hevc_nvenc -rc:v vbr_hq -cq:v 19 -b:v 3593k -minrate 2515k -maxrate 4670k -bufsize 7186k -spatial_aq:v 1 -rc-lookahead:v 32 -c:a copy -c:s copy -max_muxing_queue_size 9999 -pix_fmt p010le -bf 5 -map -v:1 Y:/The Hobbit (1977) WEBRip-1080p-TdarrCacheFile-C6J1ifyAT.mkv

Last 200 lines of CLI log:

ffmpeg version N-92722-gf22fcd4483 Copyright (c) 2000-2018 the FFmpeg developers

built with gcc 8.2.1 (GCC) 20181201

configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-amf --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt

libavutil 56. 24.101 / 56. 24.101

libavcodec 58. 42.102 / 58. 42.102

libavformat 58. 24.101 / 58. 24.101

libavdevice 58. 6.101 / 58. 6.101

libavfilter 7. 46.101 / 7. 46.101

libswscale 5. 4.100 / 5. 4.100

libswresample 3. 4.100 / 3. 4.100

libpostproc 55. 4.100 / 55. 4.100

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] stream 0, timescale not set

[h264 @ 000001aac9590800] data partitioning is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.

[h264 @ 000001aac9590800] If you want to help, upload a sample of this file to ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list. ([email protected])

[h264 @ 000001aac9590800] no frame!

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] Stream #3: not enough frames to estimate rate; consider increasing probesize

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] decoding for stream 3 failed

[mov,mp4,m4a,3gp,3g2,mj2 @ 000001aac958b800] Could not find codec parameters for stream 3 (Video: h264, none): unspecified size

Consider increasing the value for the 'analyzeduration' and 'probesize' options

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Z:/movies/The Hobbit (1977)/The Hobbit (1977) WEBRip-1080p.mp4':

Metadata:

major_brand : mp42

minor_version : 0

compatible_brands: mp42isomavc1

creation_time : 2020-01-15T21:18:58.000000Z

title : The.Hobbit.1977.1080p.WebRip.H264.AC3.DD2.0.Will1869

artist :

album :

comment :

encoder : DVDFab 11.0.4.2

Duration: 01:17:25.09, start: 0.000000, bitrate: 7534 kb/s

Chapter #0:0: start 0.000000, end 151.025833

Metadata:

title : Chapter 1

Chapter #0:1: start 151.025833, end 217.008375

Metadata:

title : Chapter 2

Chapter #0:2: start 217.008375, end 486.027125

Metadata:

title : Chapter 3

Chapter #0:3: start 486.027125, end 619.035000

Metadata:

title : Chapter 4

Chapter #0:4: start 619.035000, end 714.004833

Metadata:

title : Chapter 5

Chapter #0:5: start 714.004833, end 779.028125

Metadata:

title : Chapter 6

Chapter #0:6: start 779.028125, end 850.015667

Metadata:

title : Chapter 7

Chapter #0:7: start 850.015667, end 923.005250

Metadata:

title : Chapter 8

Chapter #0:8: start 923.005250, end 1026.024792

Metadata:

title : Chapter 9

Chapter #0:9: start 1026.024792, end 1093.008375

Metadata:

title : Chapter 10

Chapter #0:10: start 1093.008375, end 1181.012917

Metadata:

title : Chapter 11

Chapter #0:11: start 1181.012917, end 1311.017792

Metadata:

title : Chapter 12

Chapter #0:12: start 1311.017792, end 1419.000667

Metadata:

title : Chapter 13

Chapter #0:13: start 1419.000667, end 1847.011542

Metadata:

title : Chapter 14

Chapter #0:14: start 1847.011542, end 2069.024958

Metadata:

title : Chapter 15

Chapter #0:15: start 2069.024958, end 2310.015708

Metadata:

title : Chapter 16

Chapter #0:16: start 2310.015708, end 2405.027250

Metadata:

title : Chapter 17

Chapter #0:17: start 2405.027250, end 2544.041125

Metadata:

title : Chapter 18

Chapter #0:18: start 2544.041125, end 2623.036708

Metadata:

title : Chapter 19

Chapter #0:19: start 2623.036708, end 2743.031542

Metadata:

title : Chapter 20

Chapter #0:20: start 2743.031542, end 2946.026000

Metadata:

title : Chapter 21

Chapter #0:21: start 2946.026000, end 3171.000708

Metadata:

title : Chapter 22

Chapter #0:22: start 3171.000708, end 3641.011917

Metadata:

title : Chapter 23

Chapter #0:23: start 3641.011917, end 3696.025167

Metadata:

title : Chapter 24

Chapter #0:24: start 3696.025167, end 3882.002583

Metadata:

title : Chapter 25

Chapter #0:25: start 3882.002583, end 4067.020750

Metadata:

title : Chapter 26

Chapter #0:26: start 4067.020750, end 4174.002625

Metadata:

title : Chapter 27

Chapter #0:27: start 4174.002625, end 4348.009792

Metadata:

title : Chapter 28

Chapter #0:28: start 4348.009792, end 4473.009667

Metadata:

title : Chapter 29

Chapter #0:29: start 4473.009667, end 4585.038208

Metadata:

title :

Chapter 30

Chapter #0:30: start 4585.038208, end 4644.264042

Metadata:

title : Chapter 31

Stream #0:0(und): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, bt709), 1924x1040 [SAR 1:1 DAR 37:20], 7147 kb/s, 23.98 fps, 23.98 tbr, 24k tbn, 47.95 tbc (default)

Metadata:

creation_time : 2020-01-15T21:18:58.000000Z

encoder : JVT/AVC Coding

Stream #0:1(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, stereo, fltp, 384 kb/s (default)

Metadata:

creation_time : 2020-01-15T21:18:58.000000Z

Side data:

audio service type: main

Stream #0:2(und)

: Data: bin_data (text / 0x74786574), 0 kb/s

Metadata:

creation_time : 2020-01-15T21:18:58.000000Z

Stream #0:3: Video: h264, none, 90k tbr, 90k tbn, 180k tbc

Stream mapping:

Stream #0:0 -> #0:0 (h264 (h264_cuvid) -> hevc (hevc_nvenc))

Stream #0:1 -> #0:1 (copy)

Stream #0:2 -> #0:2 (copy)

Press [q] to stop, [?] for help

[matroska @ 000001aacb28e9c0] Only audio, video, and subtitles are supported for Matroska.

Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument

Error initializing output stream 0:0 --

Conversion failed!

 

I also have 9 mkv files that have failed health checks before even getting to the transcoder and at the end they all say:

 

  Hide contents

scan: unrecognized file type

[15:22:39] libhb: scan thread found 0 valid title(s)

No title found.

HandBrake has exited.

 

Specific example with full info log:

 

Komi Can't Communicate S01E11 (Health check: Error/Cancelled)

  Hide contents

NodeID: RC Desktop

Command:

C:/Users/RCM02/Desktop/tdarr/Tdarr_Node/assets/app/HandBrakeCLI.exe -i Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv -o Y:/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p-TdarrCacheFile-8KthqV_5x.mp4 --scan

Last 200 lines of CLI log:

[15:22:39] Compile-time hardening features are enabled

[15:22:39] hb_init: starting libhb thread

[15:22:39] thread 1 started ("libhb")

HandBrake 1.4.2 (2021100300) - MinGW x86_64 - https://handbrake.fr

8 CPUs detect

ed

Opening Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S

01E11 - It's Just a Performance for the Culture Festival + It's Just Festival

Preparations + It's Just Flyers Distribution

+ It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv...

[15:22:39] CPU: Intel(R) Core(TM) i3-10100F CPU @ 3.60GHz

[15:22:39]

- Intel microarchitecture Comet Lake

[15:22:39] - logical processor count: 8

[15:22:39] Intel Quick Sync Video support: no

[15:22:39] hb_scan: path=Z

:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 -

It's Just a Performance for the Culture Festival + It'

s Ju

st Festival Preparations + It's Just Flyers Distribution + I

t's J

ust the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv,

title_i

ndex=1

src/libbluray/disc/disc.c:333: failed opening UDF image Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv

src/libbluray/disc/disc.c:437: error opening file BDMV\index.bdmv

src/libbluray/disc/disc.c:437: error opening file BDMV\BACKUP\index.bdmv

src/libbluray/bluray.c:2646: nav_get_title_list(Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids WEBRip-1080p.mkv\) failed

[15:22:39] bd: not a bd - trying as a stream/file instead

libdvdread: Encryp

libdvdread: Could not open input:

libdvdread:

ted DVD support unavailable.

Can't open Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just

Festival Preparations + It's Just Flyers Distribution + It's Just the Culture Festival Eve + It's Just Maids

WEBRip-1080p.mkv for reading

libdvdnav: vm:

failed to open/read the DVD

[15:22:39] dvd: not a dvd - trying as a stream/file instead

[15:22:39] hb

_stream_open: open Z:/anime/Komi Can't Communicate/Season 1/Komi Can't Communicate - S01E11 - It's Just a Performance for the Culture Festival + It's Just Festival Preparations + It's Just Flyers Distribution + It's Just the Culture F

estival Eve + It's Just Maids WEBRip-1080p.mkv failed

[15:22:39] s

can: unrecognized file type

[15:22:39] libhb: scan thread found 0 valid title(s)

No title found.

HandBrake has exited.

 

Any help with this is appreciated.

 

Thanks

Are the files encrypted? Handbrake doesn't support encrypted media files.

Link to comment

Hi all.

Set up tdarr a few days ago, works great mostly but having a strange issue with my TV Shows library.

Transcoding works fine but getting a "Copy failed" error afterwards.

Checking the handling info, I'm getting:

Quote

Cache file /temp/Show - S01E07-TdarrCacheFile-HjYJU-2Xm.mkv (1679520663 bytes) does not match size of new cache file /mnt/media/TV Shows - English/Show/Season 01/Show - S01E07-TdarrCacheFile-k3p7_wY55.mkv (25427968 bytes)

I've trying setting all permissions to 777, no change.

 

Any idea anyone?

Thanks

Link to comment
On 2/7/2022 at 11:48 PM, HaveAGitGat said:

Are the files encrypted? Handbrake doesn't support encrypted media files.

Not that I'm aware of. Sonarr/Radarr and Plex don't have any issues with them. Just Tdarr. Is there a way for me to double check easily?

Edited by rcm024
Link to comment

Hello, I'm having an annoying issue .

I don't know why (as everything is successed in the logs) but some video file just after beeing reencoded are not complet.

I mean that a 3.4 Gb video could be 50Mo after, playable but have only a couple minutes of video.

this could be easely changed is a check of the lenght of the video was done after the transcode.

 

I have noticed over 1000 video corrupted by tdarr since I'm using it.

 

another thing, it would be nice to know witch node took care of the transcoding in the logs.

thanks

Link to comment

Getting variations of this error on just about every transcode today. Has been previously working without issue, any ideas?

 

DURATION : 02:04:06.720000000

[h264_cuvid @ 0x5651f381a580]

Cannot load libnvcuvid.so.1

[h264_cuvid @ 0x5651f381a580]

Failed loading nvcuvid.

Stream mapping:

Stream #0:0 -> #0:0

(h264 (h264_cuvid) -> hevc (hevc_nvenc))

Stream #0:1 -> #0:1 (copy)

Stream #0:2 -> #0:2 (copy)

Stream #0:3 -> #0:3 (copy)

Stream #0:4 -> #0:4 (copy)

Stream #0:5 -> #0:5 (copy)

Error while opening decoder for input stream #0:0 : Operation not permitted

 

Link to comment
37 minutes ago, NeoDude said:

Getting variations of this error on just about every transcode today. Has been previously working without issue, any ideas?

 

DURATION : 02:04:06.720000000

[h264_cuvid @ 0x5651f381a580]

Cannot load libnvcuvid.so.1

[h264_cuvid @ 0x5651f381a580]

Failed loading nvcuvid.

Stream mapping:

Stream #0:0 -> #0:0

(h264 (h264_cuvid) -> hevc (hevc_nvenc))

Stream #0:1 -> #0:1 (copy)

Stream #0:2 -> #0:2 (copy)

Stream #0:3 -> #0:3 (copy)

Stream #0:4 -> #0:4 (copy)

Stream #0:5 -> #0:5 (copy)

Error while opening decoder for input stream #0:0 : Operation not permitted

 

 

I'm having same issue. Seems like there was an update to Tdarr docker yesterday which has broken it. I'm posting an issue on Github now.

Link to comment
58 minutes ago, absolute_badger said:

UPDATE: tdarr 2.00.14 is confirmed broken. Do not upgrade to this version until a fix is available!

Too bad I already updated everything to 2.00.14 :(

 

Only the tdarr node docker container on my unraid server itself is having issues... My other 3 machines running a node are comfortably plugging away and successfully transcoding media (server also on the same unraid machine the malfunctioning node was running on).

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.