sittingmongoose Posted March 16, 2021 Share Posted March 16, 2021 (edited) So I got v2 setup and the node. Added the nvidia parameters to my node docker(plex works with my p2000). Selected the Winsome H265 NVENC plugin, turned on a gpu worker is its "working" but unraid isnt showing any processes on nvenc. So i am not quite sure if its actually working on GPU. I have a cpu worker disabled currently. To add to it, if I increase GPU workers, it works and my cpu usage doesnt go up. Edited March 17, 2021 by sittingmongoose Quote Link to comment
Meller Posted March 27, 2021 Share Posted March 27, 2021 So is this anything like the docker unmanic? Where it will scan your libraries, and automatically convert any file that isn't a specific format? Like make all my movies x265 .mkv files? If so, has anyone used both dockers? Which one gives the best output in terms on video quality post transcoding? How does it handle transcoding HDR content? Quote Link to comment
kri kri Posted March 30, 2021 Share Posted March 30, 2021 Tdarr has much more control over how the files are handled, but its more complex than unmanic. I would honestly just test yourself - use test files obviously and see which one you like best. Generally, I had to stop using unmanic because I kept getting file sizes larger than the original file. Tdarr has worked well, its just a little more complex like I said. Quote Link to comment
Yekul Posted April 5, 2021 Share Posted April 5, 2021 Probably a long shot, but any way to control the % of overall cores/threads tdarr uses? Was hoping to have a situation where you can specify say 90% usage of all cores rather than pinning and locking out an entire core/thread. Been having solid success so far with tdarr, so thanks OP. Quote Link to comment
kizer Posted April 14, 2021 Share Posted April 14, 2021 using V1 tdarr_aio I was looking at my plugins via the library under Transcode Options and some of them say "Read error". They are all still in the Local Folder. Should I be worried? So I if I check the Community button vs the Local the error goes away until I return then it says Invalid Plugin in purple under the search field. All my Plugins ID's where copied from the local folder and I made sure the Local folder was selected when I added them the first time. I just don't know what is going on now thou. Everything seemed to be just fine until I clicked the update community Plugins. Quote Link to comment
aurevo Posted April 14, 2021 Share Posted April 14, 2021 Hello, I am running into Transcoding loop using ffmpeg CLI option. I have created a library under tdarr_aio version Beta 1.3003 and set the following under transcode options - Video - FFmpeg CLI arguments: "-y -hwaccel cuda -hwaccel_output_format cuda,-map 0:m:language:ger -map -v -map V -max_muxing_queue_size 8192 -c copy -c:v hevc_nvenc -preset fast -err_detect ignore_err" This CLI arguments work also very well, but after transcoding is done, transcoding starts again from the beginning and so on. Any way to stop this behavior? Quote Link to comment
bclinton Posted May 6, 2021 Share Posted May 6, 2021 Hi folks.....coming over from Unmanic. Got it up and running on 2 libraries. I'm still al little fuzzy on the node container being required but it works I would like it to scan the 2 libraries at 2AM M-F. Looking for suggestions on the switches and how I should set them. I have the schedule tab set for 2AM M-F for each library. Wasn't sure about the watch folder option and the ignore schedules option on the main page. Quote Link to comment
lazjsss Posted May 23, 2021 Share Posted May 23, 2021 Just getting started with tdarr, I have a question about hdr metadata. Can tdarr encode a 4k remux with hdr to save space? Is there a plug in for this? With the amount of time it takes to encode a 4k remux I thought I would ask here for assistance before waiting a day or two to find out it does not pass the metadata. Thank you for any assistance. Quote Link to comment
eagle470 Posted June 2, 2021 Share Posted June 2, 2021 Running TDARR, it looks like it's using the GPU, however, it's not showing as an 'active app.' It would be nice to see it as an 'active app' so I know what is beating up my GPU and how many streams are in use at a given time. Please see screen shots for reference. Quote Link to comment
FlyingTexan Posted June 20, 2021 Share Posted June 20, 2021 Has anyone made an actual guide on how to use tdarr with unraid? I've been looking around and can't seem to find one. Quote Link to comment
ccsnet Posted July 15, 2021 Share Posted July 15, 2021 On 2/1/2021 at 11:34 PM, pyrater said: ITs there now Has tdarr_aio been pulled from the app store ? (see attached image) Thanks Terran Quote Link to comment
drewgi Posted August 9, 2021 Share Posted August 9, 2021 I'm looking to convert .ts files into .mp3 files, it's from radio recorded via DVR. How would I go about doing this? I already use tdarr for a few things so I don't really want to set up handbrake or something else. I just want to drop the video component (because it's blank anyway) and convert to .mp3, or any other common sound file format I guess. Quote Link to comment
pupmeister Posted August 19, 2021 Share Posted August 19, 2021 I have been searching everywhere that I can think of, and I cannot find anything about 4k HDR content and how you can transcode it. Any help in this area would be appreciated. Quote Link to comment
DuzAwe Posted September 9, 2021 Share Posted September 9, 2021 (edited) I have v2 setup and the node. Added the nvidia parameters to my node docker(plex works with my 1060Super). Selected the Winsome H265 NVENC plugin, turned on a gpu worker is its "working" but unraid netdata isnt showing any processes on nvenc. So I am not quite sure if its actually working on GPU. I have a cpu worker disabled currently. Edited September 9, 2021 by DuzAwe Quote Link to comment
Wetterchen Posted September 26, 2021 Share Posted September 26, 2021 On 9/10/2021 at 1:26 AM, DuzAwe said: I have v2 setup and the node. Added the nvidia parameters to my node docker(plex works with my 1060Super). Selected the Winsome H265 NVENC plugin, turned on a gpu worker is its "working" but unraid netdata isnt showing any processes on nvenc. So I am not quite sure if its actually working on GPU. I have a cpu worker disabled currently. check out this YT Video, its show what you maybe missing. Quote Link to comment
casperse Posted September 26, 2021 Share Posted September 26, 2021 So I found a Unraid plugin in the stack for permissions But when I add it I get error: Pre-processing - Set file permissions for UnRaid Plugin error! Error: Command failed: chown nobody:users I remember in the docker resilio-sync you could do a: Any input on how to get this working? Thanks! Quote Link to comment
glennv Posted September 27, 2021 Share Posted September 27, 2021 (edited) I have lots of foreign movies (old dvd converts etc) spread all over my library with vobsubs that do not have any online available srt's etc, so i have to keep the vobsub track. Is there a way to tell tdarr to skip converting the file if it detects a vobsub track ? I can not risk loosing any of these while converting my entire library using tdarr, and manually checking thousands of videos which would be affected is a nogo. Any suggestions ? Edited September 27, 2021 by glennv Quote Link to comment
surferjsmc Posted September 27, 2021 Share Posted September 27, 2021 Hi ppl! I've followed spaceinvader one's guide to set up Tdarr using my Nvidia gtx 970 in the server, everything looks correct but i can't set anything on the node part at the main page, it keeps blinking in a loop showing the gpu node for about 2 seconds and change again to no tdarr nodes detected. Nvidia driver installed is the lasted one v470.74. Anyone having this issue ? Quote Link to comment
5hurb Posted September 28, 2021 Share Posted September 28, 2021 14 hours ago, surferjsmc said: Hi ppl! I've followed spaceinvader one's guide to set up Tdarr using my Nvidia gtx 970 in the server, everything looks correct but i can't set anything on the node part at the main page, it keeps blinking in a loop showing the gpu node for about 2 seconds and change again to no tdarr nodes detected. Nvidia driver installed is the lasted one v470.74. Anyone having this issue ? double check you have --runtime=nvidia in advanced extra param on the node. Now the issue I have, I have 2x GPU's how the F do I get this working? Will takes months to get through my database at the rate its working at with just 1 Quote Link to comment
Pascal51882 Posted September 28, 2021 Share Posted September 28, 2021 (edited) Hi, I followed the guide from spaceinvader one. After changing my directories I get an error while transcoding with the GPU. Before it worked for 6 files fine. I than recreated the tdarr and tdarr node dockers but the problem persists. With the CPU it would just work but thats teribble slow. The GPU Plugin is for sure active. My GPU is a GTX 1080 with the nvidia driver installed in the newest version. GPU stats is also installed and detects the GPU right. The error I see is: Quote Stream mapping: Stream #0:0 -> #0:0 (h264 (h264_cuvid) -> hevc (hevc_nvenc)) Stream #0:1 -> #0:1 (copy) Stream #0:2 -> #0:2 (copy) Stream #0:3 -> #0:3 (copy) Stream #0:4 -> #0:4 (copy) Stream #0:5 -> #0:5 (copy) Stream #0:6 -> #0:6 (copy) Press [q] to stop, [?] for help [hevc_nvenc @ 0x55c7c28b0340] No NVENC capable devices found Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height Conversion failed! I get this for every single file. Even files I could transcode before would fail (had a copy in h264). edit: The problem seems to be the Plugin: Tdarr_Plugin_MC93_Migz1FFMPEG Migz-Transcode Using Nvidia GPU & FFMPEG With other it works but which one would you use instead? I have 720p-> UHD Edited September 28, 2021 by Pascal51882 Quote Link to comment
casperse Posted September 28, 2021 Share Posted September 28, 2021 On 9/26/2021 at 7:08 PM, casperse said: So I found a Unraid plugin in the stack for permissions But when I add it I get error: Pre-processing - Set file permissions for UnRaid Plugin error! Error: Command failed: chown nobody:users I remember in the docker resilio-sync you could do a: Any input on how to get this working? Thanks! Have enyone got this Unraid plugin working? - I seem to have permissions problems after a encode Quote Link to comment
[email protected] Posted September 28, 2021 Share Posted September 28, 2021 hi guys I'm seeking for help of how to setup this plugin or any other plugin that can help me to remove junk/spam from audio and subtitle tracks. the plugin I'm using right now is "Migz-Clean title metadata" this plugin is working to remove the video metadata junk but i can't make it to work with audio & subtitles. Quote Link to comment
surferjsmc Posted September 28, 2021 Share Posted September 28, 2021 5 hours ago, 5hurb said: double check you have --runtime=nvidia in advanced extra param on the node. Now the issue I have, I have 2x GPU's how the F do I get this working? Will takes months to get through my database at the rate its working at with just 1 Checked that and the other two variables but all ok. Quote Link to comment
danimal86 Posted September 28, 2021 Share Posted September 28, 2021 (edited) I ran through the spaceinvader one tutorial and am running into a file path issue (at least i think it is) My docker image is filling up. I'm getting critical errors: I'm guessing that its re-encoding to somewhere where it shouldn't, but i cant figure out why. I did make a new share called "temp" and set it to Prefer for the cache settings. here's the tdarr template: tdarr node: in tdarr under libraries (for my movies library) Edit: So i've got the dockers running right now, and not getting any big errors, but docker memory is still high: Edited September 28, 2021 by danimal86 Quote Link to comment
surferjsmc Posted September 28, 2021 Share Posted September 28, 2021 57 minutes ago, surferjsmc said: Checked that and the other two variables but all ok. Ok now all is working 🙂, the only thing I've made was changing the name of the node from GPU to gtx970 and after that everything started to work. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.