NoLMTs Posted October 9, 2019 Share Posted October 9, 2019 (edited) Hi, I have a cache drive with a smart status fail. This started a few days ago. I am trying to run a self test but both quick and extended are not working...I click start and it just blinks once and does nothing. I am not sure if my drive is failing or if its something else. Could use some help. The cache drive is NVME and is working fine with no filesystem errors. it is also good to note that the other drives smart self test is working. Just the cache drive selftest button does nothing. Edited October 9, 2019 by NoLMTs Quote Link to comment
JorgeB Posted October 9, 2019 Share Posted October 9, 2019 Might just be failing SMART because it's past the expect flash life, SMART report will show. Quote Link to comment
NoLMTs Posted October 9, 2019 Author Share Posted October 9, 2019 THis is the report unsure what to make of it === START OF INFORMATION SECTION === Model Number: Samsung SSD 960 EVO 250GB Serial Number: S3ESNX0K305123P Firmware Version: 3B7QCXE7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 250,059,350,016 [250 GB] Unallocated NVM Capacity: 0 Controller ID: 2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 5381b0353d Local Time is: Wed Oct 9 09:19:50 2019 PDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 79 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.04W - - 0 0 0 0 0 0 1 + 5.09W - - 1 1 1 1 0 0 2 + 4.08W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1500 4 - 0.0050W - - 4 4 4 4 2200 6000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! - NVM subsystem reliability has been degraded SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x04 Temperature: 31 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 101% Data Units Read: 41,419,460 [21.2 TB] Data Units Written: 70,909,074 [36.3 TB] Host Read Commands: 260,886,613 Host Write Commands: 370,638,289 Controller Busy Time: 5,438 Power Cycles: 14 Power On Hours: 3,081 Unsafe Shutdowns: 9 Media and Data Integrity Errors: 0 Error Information Log Entries: 4 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 31 Celsius Temperature Sensor 2: 41 Celsius Error Information (NVMe Log 0x01, max 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 4 3 0x021e 0x400e - 0 1 - 1 3 3 0x021d 0x400e - 0 1 - 2 2 3 0x021c 0x400e - 0 1 - 3 1 3 0x021b 0x400e - 0 1 - Quote Link to comment
JorgeB Posted October 10, 2019 Share Posted October 10, 2019 11 hours ago, NoLMTs said: Percentage Used: 101% My guess was correct. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.